• Dual Gigabit Ethernet: Two RJ45 ports with 10/100/1000 Mb/s each enable parallel connections for maximum flexibility
• High system compatibility: PCIe x1 interface and supplied low-profile slot bracket for standard and compact housings
• Optimised network performance: Support for jumbo frames (up to 9K), VLAN tagging (802.1Q) and flow control (802.3x)
• Energy-efficient data transmission: Supports IEEE 802.3az-2010 (Energy Efficient Ethernet) for lower power consumption
• Reliable Realtek chipset: Combination of RTL8111 and ASM1182e for stable performance in professional environments

The InLine® Dual Gigabit network card with two RJ45 ports is the ideal solution for professional server, workstation and AV environments where a stable, redundant or separate network connection is required. Thanks to the PCIe x1 interface and the supplied low-profile slot bracket, it can be flexibly integrated into a wide variety of housing types.

The card provides a reliable 10/100/1000 Mb/s Ethernet connection via both ports and supports modern network technologies such as IEEE 802.1Q VLAN, Jumbo Frames up to 9K and Flow Control according to 802.3x. In addition, the Energy Efficient Ethernet (EEE) function (802.3az) improves energy consumption during operation – ideal for continuous use in the company.

The integrated Realtek RTL8111 chipset in combination with the ASM1182e controller ensures stable and high-performance data transmission - even in demanding network scenarios. All common operating systems are supported, including Windows, Linux, FreeBSD and virtualisation platforms such as VMware ESXi.

Technical data:

• Bus type: PCIe v1.1 (2.5 GT/s) 1-lane
• Connection: 2 x RJ45 (copper)
• Data rate: 10/100/1000 Mb/s (Gigabit Ethernet)

Maximum cable length:

• 10BASE-T: Category 3 or higher (up to 100 m)
• 100BASE-TX: Category-5 or higher (up to 100 m)
• 1000BASE-T: Category 5e or higher (up to 100 m)

• Chip set: Realtek RTL8111 + ASM1182e
• Supported protocols: IPv4, IPv6
• Dimensions: 79 mm x 60 mm (PCIe board)

Network & protocol support

Supported IEEE standards:

• IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.3ab (Gigabit Ethernet)
• IEEE 802.3x (Flow Control), IEEE 802.1Q (VLAN)
• IEEE 802.3az-2010(EEE) Energy Efficient Ethernet

Features:

• Auto-negotiation (10/100/1000 Mb/s)
• MDI/MDI-X (automatic crossover detection)
• Receive-Side Scaling (RSS)
• Support for jumbo frames (up to 9K)
• UDP/TCP & IP checksum offloading

Operating system support

• Windows: 11, 10, 8, 7
• Windows Server: 2008 R2, 2016, 2019, 2021
• Linux: from kernel version 2.6.30
• Other: FreeBSD, virtualisation environments (e.g. VMware ESXi)

Environmental conditions:

• Operating temperature: 0 °C to 55 °C
• Storage temperature: -40 °C to 70 °C
• Maximum humidity: 90 %

Scope of delivery:

• 1x InLine® Dual Gigabit network card, 2x RJ45 1Gb/s
• 1x low-profile slot bracket
• 1x driver CD
• 1x operating instructions (German/English)

• for mounting modules
• Fixing frame with 80x80mm cover + central plate 50x50mm
• with dust protection caps and labelling field
• without modules

• Magnetic smartphone holder for MagSafe compatible devices and universal clamp for all smartphones with a width of 50 to 88 mm
• Rugged construction made of ABS, polycarbonate and aluminum
• Infinitely telescopically extendable from 34.5 to 150 cm
• Wireless freedom: integrated Bluetooth remote control compatible with iOS and Android devices for wireless triggering
• 2-in1: Selfie stick & full tripod with sturdy tripod base;
  • Time-lapse recordings made easy: Can be used as a tripod – e.g. for sunsets or plant growth.
  • Selfie stick for content creators: Ideal for vlogs, social media stories or vacation photos – stable hold thanks to magnet or clamp and wireless recording via Bluetooth.
• Lightweight & mobile: 363 g light and 31 cm small

The InLine® magnetic smartphone tripod with telescopic extension is a versatile solution for professional users who place high demands on flexibility and mobility. The 2-in-1 design combines a high-quality selfie stick with a sturdy tripod including a three-legged base, providing the ideal conditions for video and photo shoots on the go or in the office.

Thanks to the magnetic holder with ball joint, compatible smartphones can be securely attached in portrait or landscape format. For devices without MagSafe or comparable technology, an adjustable universal clamp (for 50–88 mm wide devices) is also available. The extendable telescopic aluminum arm reaches a maximum height of 1.50 m and ensures flexible positioning - whether for presentations, technical documentation or live streams.

The supplied Bluetooth remote control is a particular plus: it can be paired wirelessly with Android or iOS end devices (Android 4.2.2 or iOS 6 or higher) and enables uncomplicated, remote control of photo or video recordings - ideal for individuals or small teams in the field or during training sessions. The CR1632 battery is already included.

The low weight and compact design make the InLine® tripod the ideal companion for mobile use – whether in a support vehicle, in event technology or in a presentation case.

Technical specifications

• Color: black
• Bluetooth version: 5.0
• Width of the tripod: 330 mm
• Magnetic surface: 56 × 44 × 2.2 mm
• Material: ABS plastic / polycarbonate / aluminum
• Weight: 363 g
• Compatible smartphone widths: 50–88 mm
• Battery: CR1632 (already included)