InLine® Blank RJ45 Keystone patch panel 19", 48 ports, 1U, black
Patch panel blank for use with snap-in modules
- suitable for Cat.6a, Cat.6, Cat.5 modules
- for max. 48 Keystone modules
- 19" frame, height: 1U
- Colour: Black
Product Matrix
| Article height: | 4.5 cm |
|---|---|
| Article length: | 48 cm |
| Article width: | 10 cm |
| Colour: | Black (RAL9005) |
| Height unit: | 1 U |
| Keystone SNAP-In compatible: | Yes |
| Max. supported PoE standard: | 802.3bt |
| Max. supported data transfer rate: | 10 Gb/s |
| Max. supported power: | 90 W |
| Mounting: | 19" rackmount |
| Network category: | Module dependent |
| Number of ports: | 48 |
| Packaging volume: | 0.0042 m³ |
| Shielding: | No |
| Type: | Panel blank |
| Type of packaging: | Poly bag without Euro perforation |
| Version: | Normal |
| Wire pairs used for power transmission: | The specific method used is determined by the PSE (Power Sourcing Equipment) |
| Customs tariff number: | 8536699099 |
|---|---|
| EAN Barcode: | 4043718255511 |
| Height packaging: | 0.062 m |
| Length packaging: | 0.507 m |
| Width packaging: | 0.136 m |
| Net weight: | 0.621 kg |
| Weight: | 0.770 kg |
| Brand: | InLine® |
| Country of origin: | Taiwan |
| Manufacturer No.: | 76848C |
| Manufacturer information: |
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Gießen Deutschland service@inline-info.com |
|
InLine_76848C_Datasheet.pdf |
|
InLine_76848C_Datenblatt.pdf |
EU-Konformitaetserklaerung
|
76848C.PDF |
RoHS
|
RoHS_76848C.pdf |
|
RoHS_EN_76848C.pdf |
Sicherheitshinweis
|
InLine_Sicherheitshinweis_DE.jpg |
|
InLine_Sicherheitshinweis_EN.jpg |
|
InLine_Sicherheitshinweis_IT.jpg |
Product number:
76848C
Datenblatt
For the notepad function, the convenience cookie must be accepted or renewed in the cookie settings.
Accessories
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10 Gb/s
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Item no.:
76202A
