InLine® Blank patch panel 19", 24 ports for RJ45 Keystones 0.5U black
Patch panel blank for use with snap-in modules
- suitable for Cat.6a, Cat.6, Cat.5 modules
- for max. 24 Keystone modules
- 19" frame, height: 1U
Product Matrix
| Article height: | 2.2 cm |
|---|---|
| Article length: | 48 cm |
| Article width: | 10 cm |
| Colour: | Black (RAL9005) |
| Height unit: | 0.5 U |
| Keystone SNAP-In compatible: | Yes |
| Max. supported PoE standard: | 802.3bt |
| Max. supported data transfer rate: | 10 Gb/s |
| Max. supported power: | 90 W |
| Mounting: | 19" rackmount |
| Network category: | Module dependent |
| Number of ports: | 24 |
| Packaging volume: | 0.0051 m³ |
| Shielding: | No |
| Type: | Panel blank |
| Type of packaging: | Poly bag without Euro perforation |
| Version: | Normal |
| Wire pairs used for power transmission: | The specific method used is determined by the PSE (Power Sourcing Equipment) |
| Customs tariff number: | 8536699099 |
|---|---|
| EAN Barcode: | 4043718255504 |
| Height packaging: | 0.043 m |
| Length packaging: | 0.510 m |
| Width packaging: | 0.116 m |
| Net weight: | 0.318 kg |
| Weight: | 0.418 kg |
| Brand: | InLine® |
| Country of origin: | Taiwan |
| Manufacturer No.: | 76824C |
| Manufacturer information: |
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Gießen Deutschland service@inline-info.com |
|
Anleitung Patchpanel.pdf |
EU-Konformitaetserklaerung
|
76824C.PDF |
RoHS
|
RoHS_76824C.pdf |
|
RoHS_EN_76824C.pdf |
Sicherheitshinweis
|
InLine_Sicherheitshinweis_DE.jpg |
|
InLine_Sicherheitshinweis_EN.jpg |
|
InLine_Sicherheitshinweis_IT.jpg |
Product number:
76824C
Questions about the article?
For the notepad function, the convenience cookie must be accepted or renewed in the cookie settings.
Accessories
InLine® RJ45 Module female to female SNAP-In Cat.6 STP
Snap-In or Keystone technology allows structured Lan networks to be realised using exactly the number of ports or inserts required. This solution therefore allows the use of holders from different manufacturers to better adapt to environmental requirements during installation. Snap-In modules fit into the support frame of socket outlets from well-known manufacturers such as Gira, Merten, PEHA (insert size: 14.6 x 19.4 mm)
- Feed-through Snap-In module
- 2x RJ45 female connectors (feed-through)
- Shielded STP
- Cat.6 compliant
- Configuration: 8/8 1:1
Item no.:
74206B
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10 Gb/s
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Item no.:
76202A
InLine® RJ45 Keystone Jack Snap-In module Cat.6a
InLine® RJ45 Keystone Jack Snap-In module Cat.6a
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10Gbps
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Item no.:
76201A
