InLine® Cable connector Cat.6A, shielded, tool free coupler
For connecting or extending installation cables. The assembly of the two cable ends is done almost without tools by means of an LSA technique, only a cutter is needed.
- Cat. 6A shielding up to 600MHz
- For extending installation cables
- Also suitable for repairing damaged installation cables
- Suitable for solid strands AWG 22-24
- Cat.6A shielded
- End caps screwed with strain relief
- Colour-coded LSA strips
- Suitable for PoE, PoE+, 4PPoE according to IEEE 802.3af, 802.3at, 802.3bt
Product Matrix
| Article height: | 1.70 cm |
|---|---|
| Article length: | 7.50 cm |
| Article width: | 1.50 cm |
| Connection A: | LSA clamp |
| Connection B: | Morsetto LSA |
| Finish: | Flat |
| Keystone SNAP-In compatible: | No |
| Max. supported PoE standard: | 802.3bt |
| Max. supported data transfer rate: | 10 Gb/s |
| Max. supported power: | 90 W |
| Network category: | Module dependent |
| PU: | 1 |
| Packaging volume: | 0.0002 m³ |
| PoE+: | PoE+ |
| Shielding: | Yes |
| Type: | Cable connector |
| Type of packaging: | Retail |
| Wire pairs used for power transmission: | The specific method used is determined by the PSE (Power Sourcing Equipment) |
| Customs tariff number: | 8536699099 |
|---|---|
| EAN Barcode: | 4043718307173 |
| Height packaging: | 0.018 m |
| Length packaging: | 0.143 m |
| Width packaging: | 0.075 m |
| Net weight: | 0.031 kg |
| Weight: | 0.036 kg |
| Brand: | InLine® |
| Country of origin: | China |
| Manufacturer No.: | 69992E |
| Manufacturer information: |
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Gießen Deutschland service@inline-info.com |
|
InLine_69992E_Datasheet.pdf |
|
InLine_69992E_Datenblatt.pdf |
PPWR EU-Konformitaetserklaerung
|
InLine_PPWR_69992E_DoC.pdf |
|
InLine_PPWR_69992E_KE.pdf |
RoHS
|
DoC article 69992E.pdf |
|
RoHS_69992E.pdf |
|
RoHS_EN_69992E.pdf |
Sicherheitshinweis
|
InLine_Sicherheitshinweis_DE.jpg |
|
InLine_Sicherheitshinweis_EN.jpg |
|
InLine_Sicherheitshinweis_IT.jpg |
Product number:
69992E
For the notepad function, the convenience cookie must be accepted or renewed in the cookie settings.