InLine® Desktop Consolidation Point Box 4x Keystone RJ45, metal, RAL7035
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Product Matrix
| Article height: | 4.5 cm |
|---|---|
| Article length: | 11.3 cm |
| Article width: | 8.8 cm |
| Colour: | Grey (RAL7035) |
| Keystone SNAP-In compatible: | Yes |
| Mounting: | Surface-mounted / top-hat rail |
| Network category: | Module dependent |
| Number of ports: | 4 |
| Packaging volume: | 0.0048 m³ |
| Shielding: | No |
| Type: | Surface box |
| Version: | Surface-mounted / top-hat rail |
| Customs tariff number: | 8536699099 |
|---|---|
| EAN Barcode: | 4043718288328 |
| Height packaging: | 0.055 m |
| Length packaging: | 0.125 m |
| Width packaging: | 0.115 m |
| Net weight: | 0.344 kg |
| Weight: | 0.434 kg |
| Brand: | InLine® |
| Country of origin: | China |
| Manufacturer No.: | 76264 |
| Manufacturer information: |
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Gießen Deutschland service@inline-info.com |
Product number:
76264
Datenblatt
For the notepad function, the convenience cookie must be accepted or renewed in the cookie settings.
Accessories
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10 Gb/s
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Item no.:
76202A
