InLine® Frame set for 2x RJ45 Bu/LSA inset, Keystone SNAP-In, RAL9010
With snap-in or keystone technology, structured Lan networks can be realised with exactly the number of ports or inserts that are required. This solution therefore enables the use of carriers from different manufacturers in order to better adapt to the environmental requirements during installation. The universality of this product is guaranteed by the anchoring system of the snap-in connector or insert, also known as Keystone.
- Frame set for 2x RJ45 Bu/LSA insert, Keystone SNAP-In, white RAL9010
- Mounting frame with 80x80mm cover + 50x50mm centre plate
- For mounting modules
- With dust protection caps
- Without modules
| Cable entry: | Any |
|---|---|
| Colour: | White (RAL9010) |
| Connections: | 2x RJ45 |
| Installation: | Flush-mounted |
| Keystone SNAP-In compatible: | Yes |
| Modules integrated: | No |
| Network category: | Module dependent |
| Packaging volume: | 0.0004 m³ |
| Type: | Frame set for RJ45 Bu/LSA clamp |
| Type of packaging: | Poly bag without Euro perforation |
| Customs tariff number: | 8538909999 |
|---|---|
| EAN Barcode: | 4043718103096 |
| Height packaging: | 0.025 m |
| Length packaging: | 0.178 m |
| Width packaging: | 0.115 m |
| Weight: | 0.051 kg |
| Brand: | InLine® |
| Country of origin: | Taiwan |
| Manufacturer No.: | 76201R |
| Manufacturer information: |
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Gießen Deutschland service@inline-info.com |
Product number:
76201R
Questions about the article?
For the notepad function, the convenience cookie must be accepted or renewed in the cookie settings.
Accessories
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10 Gb/s
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Item no.:
76202A
InLine® RJ45 Keystone Jack Snap-In module Cat.6a
InLine® RJ45 Keystone Jack Snap-In module Cat.6a
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10Gbps
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Item no.:
76201A
