InLine® RJ45 Keystone Jack Snap-In module Cat.6a
InLine® RJ45 Keystone Jack Snap-In module Cat.6a
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10Gbps
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Product Matrix
| Article height: | 1.7 cm |
|---|---|
| Article length: | 3.5 cm |
| Article width: | 2.8 cm |
| Connection A: | RJ45 female |
| Connection B: | LSA clamp |
| Finish: | Screw cap |
| Keystone SNAP-In compatible: | Yes |
| Max. supported PoE standard: | 802.3bt |
| Max. supported data transfer rate: | 10 Gb/s |
| Max. supported power: | 90 W |
| Network category: | Module dependent |
| PU: | 1 |
| Packaging volume: | 0.0002 m³ |
| PoE+: | PoE+ |
| Shielding: | Yes |
| Type: | Keystone |
| Type of packaging: | InLine® bag 20106ARetail |
| Wire pairs used for power transmission: | The specific method used is determined by the PSE (Power Sourcing Equipment) |
| Customs tariff number: | 8536699099 |
|---|---|
| EAN Barcode: | 4043718285785 |
| Height packaging: | 0.030 m |
| Length packaging: | 0.085 m |
| Width packaging: | 0.085 m |
| Net weight: | 0.023 kg |
| Weight: | 0.023 kg |
| Brand: | InLine® |
| Country of origin: | Taiwan |
| Manufacturer No.: | 76202F |
| Manufacturer information: |
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Gießen Deutschland service@inline-info.com |
|
76201A.pdf |
Data sheet
|
InLine_76202F_Datasheet.pdf |
|
InLine_76202F_Datenblatt.pdf |
RoHS
|
RoHS_76202F.pdf |
|
RoHS_EN_76202F.pdf |
Sicherheitshinweis
|
InLine_Sicherheitshinweis_DE.jpg |
|
InLine_Sicherheitshinweis_EN.jpg |
|
InLine_Sicherheitshinweis_IT.jpg |
Product number:
76202F
Datenblatt
For the notepad function, the convenience cookie must be accepted or renewed in the cookie settings.
Accessories
InLine® Blank Patch Panel 19" Cat.6A 24 Port 1U black
Patch panel for housing female-to-female feed-through interface modules with Snap-In quick disconnect technology. Ideal for grouping and interfacing different sections of a logically structured cabling.
- Modular with 24 locations (Fittings/Ports NOT included)
- Supports mounting of Snap-In Cat.6A, Cat.6, Cat.5 or other modules
- Installable in 19’ Rack cabinets
- Dimensions: 48.26cm wide, 1U high
- Includes Cable Management
- Includes grounding
- Colour light grey RAL7035
Item no.:
76824B
InLine® Frame set for 2x RJ45 Bu/LSA inset, Keystone SNAP-In, RAL9010
With snap-in or keystone technology, structured Lan networks can be realised with exactly the number of ports or inserts that are required. This solution therefore enables the use of carriers from different manufacturers in order to better adapt to the environmental requirements during installation. The universality of this product is guaranteed by the anchoring system of the snap-in connector or insert, also known as Keystone.
- Frame set for 2x RJ45 Bu/LSA insert, Keystone SNAP-In, white RAL9010
- Mounting frame with 80x80mm cover + 50x50mm centre plate
- For mounting modules
- With dust protection caps
- Without modules
Item no.:
76201R
InLine® Blank RJ45 Keystone patch panel 19", 48 ports, 1U, black
Patch panel blank for use with snap-in modules
- suitable for Cat.6a, Cat.6, Cat.5 modules
- for max. 48 Keystone modules
- 19" frame, height: 1U
- Colour: Black
Item no.:
76848C
InLine® Surface Mount Box for keystone 2x RJ45, white
Two RJ45 keystone / snap-in modules can be conveniently integrated into this wall-mounted box. The socket can be screwed to the wall, etc., and allows easy installation of network cables.
- Connection box for 2x Keystone RJ45 sockets
- suitable for InLine® 76202A
- Color: White
- Dimension: 50x50x30mm
Item no.:
76202B
InLine® Blank patch panel 19", 24 ports for RJ45 Keystones 0.5U black
Patch panel blank for use with snap-in modules
- suitable for Cat.6a, Cat.6, Cat.5 modules
- for max. 24 Keystone modules
- 19" frame, height: 1U
Item no.:
76824C
InLine® Blank Patch Panel 19" Cat.6A 24 Port 1U light grey
Patch panel for housing female-to-female feed-through interface modules with Snap-In quick disconnect technology. Ideal for grouping and interfacing different sections of a logically structured cabling.
- Modular with 24 locations (Fittings/Ports NOT included)
- Supports mounting of Snap-In Cat.6A, Cat.6, Cat.5 or other modules
- Installable in 19’ Rack cabinets
- Dimensions: 48.26cm wide, 1U high
- Includes Cable Management
- Includes grounding
- Colour light grey RAL7035
Item no.:
76824A
