InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, slim design
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10 Gb/s
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
Product Matrix
| Article height: | 1.6 cm |
|---|---|
| Article length: | 3.8 cm |
| Article width: | 2 cm |
| Connection A: | RJ45 female |
| Connection B: | LSA clamp |
| Finish: | Slim design |
| Keystone SNAP-In compatible: | Yes |
| Max. supported PoE standard: | 802.3bt |
| Max. supported data transfer rate: | 10 Gb/s |
| Max. supported power: | 90 W |
| Network category: | Module dependent |
| Operation temperature: | -10 to +60 °C |
| PU: | 1 |
| Packaging volume: | 0.0002 m³ |
| PoE+: | PoE+ |
| Shielding: | Yes |
| Storage temperature: | -40 to +70 °C |
| Type: | Keystone |
| Type of packaging: | InLine® bag 20106ARetail |
| Wire pairs used for power transmission: | None |
| Customs tariff number: | 8536699099 |
|---|---|
| EAN Barcode: | 4043718255498 |
| Height packaging: | 0.030 m |
| Length packaging: | 0.085 m |
| Width packaging: | 0.085 m |
| Net weight: | 0.026 kg |
| Weight: | 0.029 kg |
| Brand: | InLine® |
| Country of origin: | Taiwan |
| Manufacturer No.: | 76202A |
| Manufacturer information: |
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Gießen Deutschland service@inline-info.com |
|
InLine_76202A_Manual_DE+EN.pdf |
Data sheet
|
InLine_76202A_Datasheet.pdf |
|
InLine_76202A_Datenblatt.pdf |
RoHS
|
RoHS_76202A.pdf |
|
RoHS_EN_76202A.pdf |
Sicherheitshinweis
|
InLine_Sicherheitshinweis_DE.jpg |
|
InLine_Sicherheitshinweis_EN.jpg |
|
InLine_Sicherheitshinweis_IT.jpg |
Product number:
76202A
Datenblatt
For the notepad function, the convenience cookie must be accepted or renewed in the cookie settings.
Accessories
InLine® Blank Patch Panel 19" Cat.6A 24 Port 1U black
Patch panel for housing female-to-female feed-through interface modules with Snap-In quick disconnect technology. Ideal for grouping and interfacing different sections of a logically structured cabling.
- Modular with 24 locations (Fittings/Ports NOT included)
- Supports mounting of Snap-In Cat.6A, Cat.6, Cat.5 or other modules
- Installable in 19’ Rack cabinets
- Dimensions: 48.26cm wide, 1U high
- Includes Cable Management
- Includes grounding
- Colour light grey RAL7035
Item no.:
76824B
InLine® Desktop Consolidation Point Box 6x Keystone RJ45, metal, RAL7035
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Item no.:
76266
InLine® Frame set for 2x RJ45 Bu/LSA inset, Keystone SNAP-In, RAL9010
With snap-in or keystone technology, structured Lan networks can be realised with exactly the number of ports or inserts that are required. This solution therefore enables the use of carriers from different manufacturers in order to better adapt to the environmental requirements during installation. The universality of this product is guaranteed by the anchoring system of the snap-in connector or insert, also known as Keystone.
- Frame set for 2x RJ45 Bu/LSA insert, Keystone SNAP-In, white RAL9010
- Mounting frame with 80x80mm cover + 50x50mm centre plate
- For mounting modules
- With dust protection caps
- Without modules
Item no.:
76201R
InLine® Blank Patch Panel 19" Cat.6A 24 Port 1U light grey
Patch panel for housing female-to-female feed-through interface modules with Snap-In quick disconnect technology. Ideal for grouping and interfacing different sections of a logically structured cabling.
- Modular with 24 locations (Fittings/Ports NOT included)
- Supports mounting of Snap-In Cat.6A, Cat.6, Cat.5 or other modules
- Installable in 19’ Rack cabinets
- Dimensions: 48.26cm wide, 1U high
- Includes Cable Management
- Includes grounding
- Colour light grey RAL7035
Item no.:
76824A
InLine® Blank patch panel 19", 24 ports for RJ45 Keystones 0.5U black
Patch panel blank for use with snap-in modules
- suitable for Cat.6a, Cat.6, Cat.5 modules
- for max. 24 Keystone modules
- 19" frame, height: 1U
Item no.:
76824C
InLine® Desktop Consolidation Point Box 4x Keystone RJ45, metal, RAL7035
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Item no.:
76264
InLine® Desktop Consolidation Point Box 6x Keystone RJ45, metal, black RAL9005
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Item no.:
76266S
InLine® Desktop Consolidation Point Box 8x Keystone RJ45, metal, RAL7035
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Item no.:
76268
InLine® Desktop Consolidation Point Box 4x Keystone RJ45, metal, black RAL9005
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Item no.:
76264S
InLine® Blank RJ45 Keystone patch panel 19", 48 ports, 1U, black
Patch panel blank for use with snap-in modules
- suitable for Cat.6a, Cat.6, Cat.5 modules
- for max. 48 Keystone modules
- 19" frame, height: 1U
- Colour: Black
Item no.:
76848C
InLine® Desktop Consolidation Point Box 8x Keystone RJ45, metal, black RAL9005
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Item no.:
76268S
InLine® Surface Mount Box for keystone 2x RJ45, white
Two RJ45 keystone / snap-in modules can be conveniently integrated into this wall-mounted box. The socket can be screwed to the wall, etc., and allows easy installation of network cables.
- Connection box for 2x Keystone RJ45 sockets
- suitable for InLine® 76202A
- Color: White
- Dimension: 50x50x30mm
Item no.:
76202B
