InLine® RJ45 to push-in terminal, 8-pin, Cat.5e, 15cm cable
- Push-in terminal for quick wiring: Single wires (18–26 AWG) can be quickly plugged in – a flat-head screwdriver ≤ 2.5 mm is all you need to remove them.
- Cat.5e RJ45 socket with fixed 15 cm connection cable: The shielded 8P8C socket is connected directly to the push-in terminal via a permanently integrated cable (length: 15 cm) – for flexible connections in confined spaces.
- Space-saving cable solution for flexible integration: Thanks to its compact design and connected cable, the adapter is ideal for mobile measuring stations, embedded projects, or control cabinet installations.
- Versatile use in industry: Perfect for temporary network connections, diagnostic tools, control systems, or prototyping – particularly suitable for changing test scenarios.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable signal transmission – even in continuous industrial operation.
The InLine® RJ45 terminal block adapter with permanently integrated 15 cm cable and 8-pin push-in terminal connects structured Ethernet signals (Cat.5e) with open wire ends – without soldering or screws. The shielded RJ45 socket (8P8C) is connected directly to the push-in terminal via a robust cable.
The push-in technology allows tool-free connection of wires in the 18–26 AWG range. If necessary, the connection can be disconnected using a flat-head screwdriver ≤ 2.5 mm via the color-coded buttons – ideal for frequent rewiring in test or prototype environments.
With a cable length of approx. 15 cm and an outer diameter of approx. 6 mm (shielded round cable), the adapter is also suitable for tight installation situations, e.g., in mobile test equipment or control cabinets. The shielded design and tested quality (short-circuit and wiring test) make it a robust solution for industrial networks and embedded applications.
- RJ45 interface: Cat.5e, 8P8C socket (shielded)
- Cable length: 15 cm (Cat.5e, shielded, 4×2 wires, 24 AWG, flexible)
- Terminal system: Push-in terminal (spring-loaded technology)
- Number of poles: 8 signals (1:1 connected)
- Connection range: 18–26 AWG (solid or stranded conductor with ferrule)
- Actuation: Release with flat-head screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Dimensions without cable: approx. 43 × 33 × 20 mm (L × W × H)
