InLine® Terminal block, RJ45 for top-hat rail

• Time savings during installation: Two screw terminal strips for 8 wires plus shielding each enable fast, solder-free wiring – tool-assisted with a flat-head screwdriver ≤ 2.5 mm, suitable for 16–26 AWG.
• Dual RJ45 interface with separate signal routing The two standardized RJ45 sockets (8P8C) in a straight design are independently connected – ideal for parallel cable routing, redundancy solutions, or testing purposes.
• DIN rail mounting for orderly system integration: Robust housing with pre-mounted DIN rail clip – ideal for structured network and control cabling in control cabinets.
• Versatile use in industry: Suitable for Ethernet signal distribution, machine communication, embedded projects, or network diagnostics in test environments.
• High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable and secure data transmission – even under continuous load in industrial environments.

The InLine® terminal block with two RJ45 sockets (8P8C, straight version) and separate terminal assignment was developed for structured network connections in control cabinets, test environments, or embedded systems.

Both sockets are completely independently connected to a screw terminal strip with 9 connections (8 signals + shield) – ideal for parallel signal routing, redundancy solutions, or comparative measurements.

The terminal strips (5.0 mm pitch) support single wires in the 16–26 AWG range and can be wired with a flat-blade screwdriver ≤ 2.5 mm.

Thanks to the pre-mounted DIN rail clip, the module is immediately ready for standard-compliant integration into common mounting rail systems.

The robust design, well-thought-out signal routing, and tested short-circuit and miswiring protection make the adapter the ideal choice for demanding industrial Ethernet applications.

• RJ45 interface: 2x 8P8C socket (straight design)
• Screw terminal strip: 2x 9 terminals (8 signals + shield), 5.0 mm pitch, with pressure plate
• Connection range: 16–26 AWG
• Actuation: With flat-head screwdriver ≤ 2.5 mm
• Rated current: 1.0 A per pin
• Max. operating voltage: 100 V between two signals
• Insulation resistance: ≥ 10 MΩ @ 300 V DC
• Operating temperature: –20 °C to +70 °C
• Insulation layer: EVA insulation on underside
• Mounting: Prepared for DIN top-hat rail
• Dimensions: approx. 60 × 90 × 19 mm (W × H × D)