What is Quick Charge?
An introduction to Qualcomm's fast charging technology
Features of Quick Charge
- Faster charging time: devices can be significantly charged in a short time (e.g. 50 % in 15-30 minutes, depending on the version).
- Backwards compatibility: Quick Charge chargers also work with devices that do not support this technology, but charge them at normal speed.
- Several versions: There are different Quick Charge versions (e.g. QC 2.0, 3.0, 4.0, 5.0), with each version offering improvements in charging speed and efficiency.
- QC 3.0: Dynamic voltage regulation for better energy efficiency.
- QC 4.0/4.0+: Support for USB-C and USB Power Delivery.
- QC 5.0: Extremely fast charging (up to 100 W), suitable for larger devices such as laptops.
- QC 3.0: Dynamic voltage regulation for better energy efficiency.
Requirements for Quick Charge:
- Fast charging with Power Delivery: Charge compatible USB-C devices with up to 33 W – ideal for smartphones, tablets and more.
- Simultaneous charging via two ports: Use USB-C and USB-A in parallel and power multiple devices at the same time.
- Safe charging thanks to intelligent chip: Protection against overcurrent, overvoltage, overload and short circuit – for maximum device safety.
- Compact design for on the go: Lightweight, handy charger – ideal for travelling, the office or at home.
- Universally applicable: Compatible with a wide range of devices and can be used worldwide thanks to 100-240 V input.
The InLine® USB power supply combines modern fast charging technologies in a compact housing: thanks to Power Delivery 3.0 and Quick Charge 3.0, you can charge your USB-C and USB-A devices up to four times faster than with conventional power supplies. The compact 33W power supply is ideal for smartphones, tablets, e-readers, headphones or other USB devices.
Simultaneous charging via both ports is no problem – intelligent power regulation ensures that all devices are optimally supplied. The charger automatically adapts to the power requirements of the connected devices. This means you benefit from safe and efficient charging at all times. An integrated safety circuit reliably protects your devices from short circuits, overvoltage, overload and overheating. The robust yet lightweight design makes the power supply the perfect addition to your mobile equipment – whether at home, on the road or in the office. Compatible with input voltages of 100-240 V, the charger is also ideal for international travel. Rely on technology that thinks for itself – powerful, compact and reliable.
- PPS output: 3.3-11V / 3A (max. 33W)
- USB-C+USB-A combined: 5V / 3A (max. 15W)
- Frequency: 50/60 Hz, 0.8 A
- Output voltage: 5-20 V DC
- Output current: max. 3.0 A
- Power consumption at zero load: 0.08 W
- Efficiency at low load: 74.0%
- Average efficiency in operation: 83.0%
- Fast charging with Power Delivery: Charge compatible USB-C devices with up to 33 W – ideal for smartphones, tablets and more.
- Simultaneous charging via two ports: Use USB-C and USB-A in parallel and power multiple devices at the same time.
- Safe charging thanks to intelligent chip: Protection against overcurrent, overvoltage, overload and short circuit – for maximum device safety.
- Compact design for on the go: Lightweight, handy charger – ideal for travelling, the office or at home.
- Universally applicable: Compatible with a wide range of devices and can be used worldwide thanks to 100-240 V input.
The InLine® USB power supply combines modern fast charging technologies in a compact housing: thanks to Power Delivery 3.0 and Quick Charge 3.0, you can charge your USB-C and USB-A devices up to four times faster than with conventional power supplies. The compact 33W power supply is ideal for smartphones, tablets, e-readers, headphones or other USB devices.
Simultaneous charging via both ports is no problem – intelligent power regulation ensures that all devices are optimally supplied. The charger automatically adapts to the power requirements of the connected devices. This means you benefit from safe and efficient charging at all times. An integrated safety circuit reliably protects your devices from short circuits, overvoltage, overload and overheating. The robust yet lightweight design makes the power supply the perfect addition to your mobile equipment – whether at home, on the road or in the office. Compatible with input voltages of 100-240 V, the charger is also ideal for international travel. Rely on technology that thinks for itself – powerful, compact and reliable.
- PPS output: 3.3-11V / 3A (max. 33W)
- USB-C+USB-A combined: 5V / 3A (max. 15W)
- Frequency: 50/60 Hz, 0.8 A
- Output voltage: 5-20 V DC
- Output current: max. 3.0 A
- Power consumption at zero load: 0.08 W
- Efficiency at low load: 74.0%
- Average efficiency in operation: 83.0%
- Two USB ports for flexible charging: Allows two USB devices to be charged or operated simultaneously via USB-A and USB Type-C directly from the 12V or 24V vehicle power outlet.
- Fast charging of compatible devices: The USB-A port supports Quick Charge 3.0 and enables reduced charging times for compatible devices.
- Suitable for 12V and 24V vehicle electrical systems: Can be used in both passenger cars and commercial vehicles.
- Compact design for the interior: The space-saving design allows for discreet use in the vehicle power outlet.
- Power Delivery 3.0 on the USB Type-C port: Enables power-adjusted power supply to compatible USB Type-C devices and supports efficient charging via the modern standard.
This USB car power adapter allows you to charge and operate mobile USB devices directly from the 12V or 24V car socket. The combination of USB-A and USB Type-C ports allows two devices to be powered simultaneously. The USB-A port supports Quick Charge 3.0 and enables shorter charging times for compatible devices.
- Input voltage: DC 12/24V, max. 2.5A
- Output voltage USB Type-C: DC 5V, max. 3A
- Two USB ports for flexible charging: Allows two USB devices to be charged or operated simultaneously via USB-A and USB Type-C directly from the 12V or 24V vehicle power outlet.
- Fast charging of compatible devices: The USB-A port supports Quick Charge 3.0 and enables reduced charging times for compatible devices.
- Suitable for 12V and 24V vehicle electrical systems: Can be used in both passenger cars and commercial vehicles.
- Compact design for the interior: The space-saving design allows for discreet use in the vehicle power outlet.
- Power Delivery 3.0 on the USB Type-C port: Enables power-adjusted power supply to compatible USB Type-C devices and supports efficient charging via the modern standard.
This USB car power adapter allows you to charge and operate mobile USB devices directly from the 12V or 24V car socket. The combination of USB-A and USB Type-C ports allows two devices to be powered simultaneously. The USB-A port supports Quick Charge 3.0 and enables shorter charging times for compatible devices.
- Input voltage: DC 12/24V, max. 2.5A
- Output voltage USB Type-C: DC 5V, max. 3A
- SMART POWER DISPLAY: The built-in digital display shows you the current power consumption in watts at all times. At the same time, you can see at a glance whether the device is fully charged – without having to unlock your smartphone screen, for example.
- FAST AND EFFICIENT CHARGING THANKS TO HIGHLY EFFICIENT GAN TECHNOLOGY: Up to 1,000 times more efficient than conventional chargers, with lower heat generation and less energy loss.
- DOUBLE POWER UP TO 30W: With one USB-C and one USB-A port, you can charge your smartphone and earphones at the same time using a single charger, or use the full 30W for a single device!
- POWER DELIVERY 3.0 AND QUICKCHARGE 3.0: Charge your devices in a flash in the shortest possible time. Versatile output options from 5-12V ensure maximum compatibility for different charging situations.
- HIGH SAFETY: With built-in protection against overvoltage, overheating and short circuits, our charger ensures safe charging for your devices.
Since 1991, InLine has been connecting industry and end users with high-quality IT accessories manufactured and tested according to German quality standards. This USB charger from InLine combines state-of-the-art charging technology with a smart consumption display. Gain valuable insights into energy consumption while the charger reliably, quickly and safely supplies your smartphone and other devices with power. The built-in digital display allows you to keep an eye on the current energy consumption in watts and compare different devices with each other. By displaying energy consumption, you can monitor the efficiency of your devices, adjust charging habits and learn to use energy more consciously. The USB charger is equipped with state-of-the-art, environmentally friendly technology to ensure fast and efficient charging performance. With a high output power of 30 watts, you can charge multiple devices simultaneously without compromising charging speed. It also supports Power Delivery 3.0 on the USB-C port and Quick Charge 3.0 on the USB-A port. Intelligent charging detection adjusts the charging speed to the device and the state of charge.
The built-in digital display allows you to keep an eye on the current energy consumption in watts at all times and compare different devices with each other. By displaying the energy consumption, you can monitor the efficiency of your devices, adjust your charging habits and learn to use energy more consciously.
The USB power supply from InLine is equipped with state-of-the-art, environmentally friendly technology to ensure fast and efficient charging performance. With a high output power of 65 watts, you can charge several devices at the same time without sacrificing charging speed. Gallium nitride (GaN) technology increases durability, reliability, charging efficiency and power density in a more compact and lightweight design. Due to the lower energy consumption during charging, the reduced material consumption during production and the smaller transport volume, the InLine power supply unit is particularly environmentally friendly.
The charger supports Power Delivery 3.0 on the USB-C ports and Quick Charge 3.0 on the USB-A port. These fast charging technologies optimise charging performance and speed with minimal energy loss. Intelligent charge detection adapts the charging speed to the device and the charge level. This shortens the charging time, protects the battery and increases its service life. The USB power supply is excellently insulated and has comprehensive protection against overvoltage, overheating and short circuits.
The lightweight, compact design hardly weighs a thing when travelling and fits into any multiple socket strip. Thanks to its variety of connections and technologies, this power adapter can be used universally and is compatible with a wide range of devices, including iOS and Android devices. Enjoy the latest charging technology while keeping an eye on the energy consumption of your devices.
Technical characteristics
- USB power adapter/charger
- Input voltage: 100-240VAC, 1.50A
- Input AC frequency: 50/60Hz
- Output voltage/output current/output power:
- USB-C1/USB-C2 output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/3.25A/65.0W
- USB-A output:
- 3.4-5.5VDC/5.0A/17.0-27.5W – 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 20.0VDC/3.0A/60.0W
- USB-C1 + USB-C2 output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/2.25A/45.0W – 5.0VDC/3.0A/15.0W – 9.0VDC/2.22A/20.0W – 12.0VDC/1.66A/20.0W
- USB-C1 + USB-A output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/2.25A/45.0W – 5.0VDC/3.0A/15.0W – 9.0VDC/2.0A/18.0W – 12.0VDC/1.5A/18.0W
- USB-C2 + USB-A output:
- 5.0VDC/4.8A/24.0W
- USBC1+ (USB-C2+USB-A) output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/2.25A/45.0W – 5.0VDC/1.5A/7.5W
- Average operating efficiency:
- 89.98% (230V, 50 Hz, USB-C1+USB-C2 20.0V/2.25A + 12.0V/1.66A)
- 90.02% (230V, 50 Hz, USB-C1+USB-C2+USB-A 20.0V/2.25A + 5.0V/1.5A + 5.0V/1.5A)
- 84.31% (230V, 50 Hz, USB-C1+USB-C2+USB-A 5.0V/3.0A + 5.0V/1.5A + 5.0V/1.5A)
- Efficiency at low load (10%):
- 85.25% (230V, 50Hz, USB-C1+USB-C2 20.0V/2.25A + 12.0V/1.66A)
- 81.42% (230V, 50Hz, USB-C1+USB-C2+USB-A 20.0V/2.25A + 5.0V/1.5A + 5.0V/1.5A)
- 71.48% (230V, 50Hz, USB-C1+USB-C2+USB-A 5.0V/3.0A + 5.0V/1.5A + 5.0V/1.5A)
- Power consumption at no load: 0.28W
- Total output power: max. 65.0W
- Overvoltage and short circuit protection
- If the power supply temperature is too high, it switches off automatically and automatically continues charging after it has cooled down
- Dimensions: 94.4x52x35.3mm (LxWxH)
- Weight: Approx. 117g
The InLine® USB PD power supply unit is ideal for use in multiple sockets, as the design means that no other protective contact sockets are blocked!
General information
- Input voltage: AC 100-240V
- Input alternating current frequency: ~50/60 Hz, 1.5 A
- Output voltage: 3.3-20.0 V DC
- Output current: max. 5.0 A
- Output power: 65.0 W
- Power Delivery 3.0
- Quick Charge 3.0
- Dimensions: Diameter 42mm, length 102mm
- USB-C1: DC 5.0V/3.0A, 9.0V/3.0A, 12.0V/3.0A, 15.0V/3.0A, 20.0V/3.25A, PPS 3.0A (65.0W)
- USB-C2: DC 5.0V/3.0A, 9.0V/3.0A, 12.0V/2.5A, 20.0V/1.5A, PPS 3.0A (30.0W)
- USB-A: DC 5.0V/4.5A (22.5W), 4.5V/5.0A (22.5W), 9.0V/3.0A, 12.0V/2.5A, 20.0V/1.5A (30.0W)
- USB PD 3.0 (USB-C1, C2) compatible, Quickcharge (USB-A) 4+ and backwards compatible
- C1+C2 = 45.0W + 18.0W = 63.0W
- C1+A = 45.0W + 18.0W = 63.0W
- C2+A = 7.5W + 7.5W = 15.0W
- C1+C2+A = 45.0W + 7.5W + 7.5W = 60.0W
- 82.31 % (USB-C1 + USB-C2 + USB-A = 3.3VDC + 5.0VDC + 5.0VDC)
- 87.48 % (USB-C1 + USB-C2 + USB-A = 20.0VDC + 5.0VDC + 5.0VDC)
- 90.94 % (USB-C1 + USB-C2 = 20.0VDC + 12.0VDC)
- 76.61 % (USB-C1 + USB-C2 + USB-A = 3.3VDC + 5.0VDC + 5.0VDC)
- 81.59 % (USB-C1 + USB-C2 + USB-A = 20.0VDC + 5.0VDC + 5.0VDC)
- 81.18 % (USB-C1 + USB-C2 = 20.0VDC + 12.0VDC)
The built-in digital display allows you to keep an eye on the current energy consumption in watts at all times and compare different devices with each other. By displaying the energy consumption, you can monitor the efficiency of your devices, adjust your charging habits and learn to use energy more consciously.
The USB power supply from InLine is equipped with state-of-the-art, environmentally friendly technology to ensure fast and efficient charging performance. With a high output power of 140 watts, you can charge several devices at the same time without sacrificing charging speed. Gallium nitride (GaN) technology increases durability, reliability, charging efficiency and power density in a more compact and lightweight design. Thanks to the lower energy consumption during charging, the reduced material consumption during production and the smaller transport volume, the InLine power supply unit is particularly environmentally friendly.
The charger supports Power Delivery 3.0 on the USB-C ports and Quick Charge 3.0 on the USB-A port. These fast charging technologies optimise charging performance and speed with minimal energy loss. The intelligent charging detection adapts the charging speed to the device and the charge level. This shortens the charging time, protects the battery and increases its service life. The USB power supply is excellently insulated and has comprehensive protection against overvoltage, overheating and short circuits.
The lightweight, compact design hardly weighs a thing when travelling and fits into any multiple socket strip. Thanks to its variety of connections and technologies, this power adapter can be used universally and is compatible with a wide range of devices, including iOS and Android devices. Enjoy the latest charging technology while keeping an eye on the energy consumption of your devices.
Technical characteristics
- USB power adapter/charger
- Input voltage: 100-240VAC, 2.50A
- Input AC frequency: 50/60Hz
- Output voltage/output current/output power:
- USB-C1/USB-C2/USB-C3 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 5.0 A / 100.0 W
- USB-A1/USB-A2 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 5.0 A / 100.0 W
- USB-A1 + USB-A2 output:
- max. 24.0 W (12.0 W + 12.0 W)
- USB-C1/USB-C2 + USB-C2/USB-C3 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 4.75 A / 95.0 W + 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V / 2.25 A / 45.0 W
- USB-C1/USB-C2/USB-C3 + USB-A1/USB-A2 output:
- max. 136.0 W (100.0 W + 36.0 W)
- USB-C1/USB-C2/USB-C3 + USB-A1 + USB-A2 output:
- max. 124.0 W (100.0 W + 12.0 W + 12.0 W)
- USB-C1 + USB-C2 + USB-C3 output:
- max. 140.0 W (65.0 W + 45.0 W + 30.0 W)
- USB-C1/USB-C2 + USB-C2/USB-C3 + USB-A1/USB-A2 output:
- max. 135.0 W (65.0 W + 45.0 W + 25.0 W)
- USB-C1/USB-C2 + USBC-2/USB-C3 + USB-A1 + USB-A2 output :
- max. 134.0 W (65.0 W + 45.0 W + 12.0 W + 12.0 W)
- USB-C1 + USB-C2 + USB-C3 + USB-A1/USB-A2 output:
- max. 140.0 W (65.0 W + 30.0 W + 20.0 W + 25.0 W)
- USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 3.25 A / 65.0 W + 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 2.5 A / 30.0 W - 15.0 V DC / 2.0 A / 30.0 W - 20.0 V / 1.5 A / 30.0 W + 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 2.22 A / 20.0 W - 12.0 V DC / 1.67 A / 20.0 W - 15.0 V DC / 1.33 A / 20.0 W + 5.0 V DC / 2.4 A / 12.0 W + 5.0 V DC / 2.4 A / 12.0 W
- Average operating efficiency:
- 86,22 % (230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 5.0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
- 90,04 % (230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 20,0 V / 3.25 A + 20.0 V / 1.5 A + 15.0 V / 1.33 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
- Efficiency at low load (10%):
- 79,39 % (230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 5,0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
- 85,54 % ( 230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 20,0 V / 3.25 A + 20.0 V / 1.5 A + 15.0 V / 1.33 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
- Power consumption at no load: 0.22W
- Total output power max. 140.0W
- Overvoltage and short circuit protection
- If the power supply temperature is too high, it switches off automatically and automatically continues charging after it has cooled down
- Dimensions power adapter: 80x31x85 mm (LxWxH)
- Dimensions stand: 60x60x32.5 mm (LxWxH)
- Weight: approx. 349g
- Centralised charging of multiple devices: Charge up to six USB devices simultaneously via USB Type-C and USB Type-A, as well as one additional device wirelessly. This reduces the number of power adapters and keeps your desk tidy.
- High charging power with modern technology: The maximum total power of 100 W enables fast and efficient charging of even powerful devices. Power Delivery and Quick Charge ensure customised charging profiles.
- Convenient wireless charging integrated: Use the integrated Qi charging surface to wirelessly charge compatible devices. Simply place your device on the surface and charge without having to use additional cables or charging adapters.
- Efficient GaN technology: Modern GaN technology enables high performance in a compact design. Lower heat generation ensures stable operation even when charging multiple devices in parallel.
- Safe everyday operation: Integrated overvoltage, short-circuit and temperature protection reliably protects connected devices. The status LED clearly indicates the operating status and wireless charging.
The InLine Qi Powerstation Multiport is a powerful desktop charging solution for the simultaneous operation of multiple USB devices. With four USB Type-C ports, two USB Type-A ports and integrated wireless charging function, up to seven devices can be charged in parallel. The maximum total power of 100 W ensures that even power-intensive devices are reliably supplied with energy.
Thanks to Power Delivery and Quick Charge support, efficient and adapted charging power is provided. The integrated Qi charging surface also enables convenient wireless charging of compatible devices. Simply place the device on the surface to start charging.
The GaN technology used ensures high efficiency and reduced heat generation. This keeps the charger stable in operation even when multiple ports are used simultaneously. Extensive protection functions such as overvoltage, short-circuit and temperature protection increase safety in daily use. The desktop design with power cord is ideal for fixed charging stations at home or at work.
- USB Type-C PD output 1 and 2: 5.0VDC/3.0A - 9.0VDC/3.0A - 12.0VDC/3.0A - 15.0VDC/3.0A - 20.0VDC/5.0A (max. 100.0W)
- USB Type-C PD output 3 and 4: 5.0VDC/3.0A - 9.0VDC/3.0A - 12.0VDC/2.5A - 15.0VDC/2.0A - 20.0VDC/1.5A (max. 30.0W)
- USB Type-A QC output 1 and 2: 5.0VDC/3.0A - 9.0VDC/3.0A - 12.0VDC/2.5A - 20.0VDC/1.5A (max. 30.0W)
- Power Delivery 2.0, 3.0 and Quick Charge 2.0, 3.0 compatible
- Wireless charging output power: 5.0W / 7.5W / 15.0W
- Max. total output power: 100.0W
- Overvoltage and short-circuit protection
- Temperature protection: If the power supply becomes too hot, it automatically switches off and resumes charging automatically after cooling down
- Input voltage: 100-240V AC
- Input AC frequency: ~50/60 Hz, 2.5 A
- Output voltage: 5.0-20.0 V DC
- Output current: max. 5.0 A
- Output power: 100.0 W
- Average operating efficiency: 83.30% (USB-C 5.0V/3.0A), 84.54% (USB-C 12.0V/1.5A), 82.05% (USB-A 5.0V/3.0A), 83.02% (USB-A 12.0V/1.5A)
- Power consumption at zero load: 0.07 W
- Dimensions (LxWxH): approx. 120x85x29mm
- Weight: approx. 310g
- Includes power cable, 1.8m
- Input voltage: DC 12/24V
- Output voltage USB-A QC 3.0: DC 5V/3A, 9V/2A, 12V/1,5A, 18W max.
- Output voltage USB-C1 Power Delivery: DC 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A, 20V/5A, 100W max.
- Output voltage USB-C2 Power Delivery: DC5V/3A, 9V/3A, 12V/2,5A, 30W max.
- Output voltage USB-C1 + USB-C2: 65W + 30W = 95W
- Output voltage USB-C1 + USB-A: 65W + 18W = 83W
- Output voltage USB-C2 + USB-A: 30W + 18W = 48W
- Output voltage USB-C1 + USB-C2 + USB-A: 45W + 30W + 18W = 93W
- Interfaces: 2x USB-C, 1x USB-A
- Supported charging methods: Power Delivery 3.0 (PD3.0), Quickcharge 3.0 (QC3.0)
- Material: Plastic/aluminium
- Dimensions: approx. 85x35mm (LxW)
- Weight: approx. 55g
- 6x charging power with USB-C: Charge up to six devices simultaneously via Power Delivery 3.0 – ideal for smartphones, tablets and more.
- Fast charging for multiple devices: Compatible with iPhone, iPad, Samsung Galaxy and more thanks to PD 3.0 and Quick Charge 4+.
- Stable mounting options: Flexible use as a desktop charger or permanently mounted on the wall – ideal for any setup.
- High safety during charging: With protection against overheating, overvoltage and short circuits – for reliable and safe charging.
With the InLine® Multiport USB-C charger, you can bring order and efficiency to your desk – or to your wall! Want to charge up to six devices at the same time? No problem: the integrated Power Delivery 3.0 technology ensures fast and safe charging of your USB-C devices, whether smartphones, tablets or headphones. Quick Charge 4+ is also supported, so you can get back up and running even faster with compatible devices.
GaN technology ensures compact dimensions, high energy efficiency and low heat generation – perfect for modern, space-saving setups. Thanks to its wall-mounting option, the charger is not only suitable for home use, but also for offices, workshops or mobile use.
An integrated protection against overvoltage, overheating and short circuits rounds off the safety concept and makes the charger a reliable partner in everyday life. The scope of delivery includes a 1.5 m long power cord. A country adapter is required for use abroad.
- USB-C PD outputs: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A
- Quick Charge 4+ compatible
- Total power: 120 W
- Input: 100–240 V AC / 2.3 A, 50/60 Hz
- Dimensions: approx. 200 × 66 × 22 mm
- Includes power cord, 1.5 m
- FAST AND EFFICIENT CHARGING THANKS TO HIGHLY EFFICIENT GAN TECHNOLOGY: Up to 1,000 times more efficient than conventional chargers, lower heat generation and less energy loss.
- FOUR-FOLD POWER UP TO 65W: With two USB-C ports, one USB-A port and the protective contact socket, you can charge your smartphone or notebook and other devices simultaneously using a single charger, or use the full 65W for a single device!
- POWER DELIVERY 3.0 (PD) and QUICKCHARGE 4+: Charge your devices in no time at all. Versatile output options from 5-20V ensure maximum compatibility for different charging situations. 1.5M CONNECTION CABLE: The connection cable allows you to position the charger flexibly and makes it easier to use.
- HIGH SAFETY: With built-in protection against overcharging, overvoltage, overcurrent and short circuits, our charger ensures safe charging for your devices.
Since 1991, InLine has been connecting industry and end users with high-quality IT accessories manufactured and tested according to German quality standards. Experience the powerful and compact 65W GaN charger with 2x USB-C ports, 1x USB-A port, 1x safety socket and 1.5m connection cable – the perfect solution for fast and efficient charging of multiple devices at the same time! Thanks to GaN (gallium nitride) technology, this power supply is highly efficient and enables better performance with a smaller design. Electrons are conducted up to 1,000 times more efficiently than with conventional silicon semiconductors, resulting in less heat generation and less energy loss. The 65W GaN charger also supports Power Delivery 3.0 on the USB-C ports and Quickcharge 4+ on the USB-A port, offering various output options.
The InLine® GaN charger provides you with four powerful connections in a compact and efficient housing. Two USB-C and two USB-A ports deliver a total output of up to 120 W and enable simultaneous charging of smartphones, tablets, laptops or accessories.
Thanks to modern GaN (gallium nitride) technology, the power supply is significantly more efficient than conventional silicon models. This means less heat generation, lower energy losses and a considerably smaller design. Ideal for professional applications in offices, conference rooms or mobile service use.
Both Power Delivery 3.0 and QuickCharge 4+ are supported, allowing even power-hungry devices to be charged reliably and quickly. Intelligent power distribution ensures that connected devices are always optimally supplied – even when several ports are in use at the same time.
The charger can be positioned flexibly: standing with the stand or lying flat thanks to the included rubber feet. This is particularly practical when space is limited but maximum performance is required.
Total power | USB-C 1 | USB-C 2 | USB-A 1 | USB-A 2 | |
|---|---|---|---|---|---|
Single output | 100 W | 100 W | |||
| 2 outputs | 120 W | 60 W | 60 W | ||
| 3 outputs | 100 W | 45 W | 45 W | 10 W | |
| 4 outputs | 100 W | 30 W | 30 W | 18 W | 18 W |
- Input voltage: AC 100–240 V
- Output voltage: 5.0–20.0 V DC
- Output current: max. 5.0 A
- Output power: 120.0 W
- Dimensions: 98 × 110 × 20 mm
- Data at 230V 50Hz (USB-C + USB-A = 20.0V / 5.0A + 12.0V / 1.67A):
- Average efficiency during operation: 90.55%
- Efficiency at low load (10%): 83.45%
- Power consumption at zero load: 0.284 W
- Input AC frequency: 50/60 Hz, 2.3 A
