- Push-in terminal for quick wiring: Single wires (18–26 AWG) are simply plugged in—no tools required. A flat-head screwdriver ≤ 2.5 mm is all you need to release them.
- Standardized RJ45 socket for structured wiring: The 8P8C interface allows direct connection to network components – ideal for control, service, or test environments.
- Compact design for space-critical applications: With a height of only 33 mm, the adapter also fits into flat housings, mounting rail slots, or mobile measuring devices.
- Versatile use in industry: Ideal for control cabinet installations, embedded systems, machine networking, test environments, or rapid prototyping – without soldering or screws.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable and secure signal transmission – even under continuous load in industrial environments.
The InLine® RJ45 terminal block adapter with integrated push-in terminal enables tool-free connection of Ethernet signals (8P8C) with open wire ends – ideal for industrial applications, laboratories, or test environments.
The permanently installed RJ45 socket (8-pin) is connected internally directly to a compact push-in terminal block. This allows quick connection of wires in the 18–26 AWG range – without any screws. A color-coded release button allows the connection to be released with a flat-head screwdriver ≤ 2.5 mm.
The compact design without additional mounting devices is particularly suitable for use in prototyping setups, diagnostic modules, embedded systems, or temporary test setups. The clearly marked connection area ensures safe and unambiguous signal assignment.
- RJ45 interface: 8P8C socket (straight, shielded)
- Terminal system: Push-in terminal (spring-loaded technology)
- Number of poles: 8 signals (1:1 connected)
- Connection range: 18–26 AWG (solid or stranded conductor with ferrule)
- Actuation: Release with flat-blade screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 43 × 33 × 20 mm (L × W × H)
- Time savings during installation: Quick wiring via screw terminals for 18–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Precise contacting of audio/microphone signals: 4-pin 3.5 mm jack with assigned terminal strip (L, R, V, +) – ideal for audio, headset, or control cables in prototyping and test environments.
- Side terminal strip for space-saving installation: Compact connection solution with adjacent screw terminal strip – ideal for narrow adapter panels or confined test environments.
- Versatile industrial applications: For signal processing, control engineering, multimedia interfaces, or development laboratories with analog audio integration.
- High signal quality: Insulation resistance ≥ 10 MΩ at 300 V DC and rated current up to 1 A – robust and suitable for continuous operation under industrial conditions.
The InLine® 3.5 mm 4-pin jack-to-terminal block adapter offers an easy way to wire analog audio and microphone signals without soldering. The 3.5 mm jack plug (TRRS) is directly connected to a 4-pin screw terminal block. The connections are clearly labeled: L (left), R (right), V (microphone/voltage), + (common ground or shielding) – ideal for signal splitting in headset or combo plug applications.
The screw terminals with a 5.0 mm pitch support wires in the 18–26 AWG range. Wiring is tool-assisted using a flat-blade screwdriver with a blade width ≤ 2.5 mm. The compact design allows for use in confined installation situations, e.g., in test setups, development laboratories, or audio interfaces. The EVA insulation layer provides protection when mounted on conductive surfaces.
- Jack connection: 3.5 mm TRRS jack plug (4-pin, L/R/microphone/ground)
- Number of poles / terminal assignment: 4 terminals / L, R, V, +
- Connection technology: Screw terminal with pressure plate, 5.0 mm pitch
- Connection range: 18–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Max. conductor resistance: 5 ohms
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Time savings during installation: Quick wiring via screw terminals for 18–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to screw lock: The VGA connector (HD15) is equipped with a mounting thread (UNC #4-40) and enables secure mechanical fastening with matching sockets – vibration-proof and durable.
- Versatile industrial applications: Ideal for analog video signals, control lines, or prototyping in test setups, machines, or visualization systems.
- Compact design: With a width of only 63.8 mm, the terminal block can be integrated into existing systems in a space-saving manner – even where space is limited.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.7 A per pin ensure reliable signal transmission – even under continuous load and in industrial environments.
The InLine® VGA (HD15) terminal block with connector in a 2-row design is ideal for wiring analog signals, e.g., for visualization, control, or service applications. Individual wires in the 18–26 AWG range can be securely connected using screw terminals with pressure plates – without any soldering. Wiring is tool-assisted with a flat-blade screwdriver ≤ 2.5 mm.
The integrated screw lock (UNC #4-40) ensures a reliable mechanical connection to the opposite end – even with frequent actuation or vibration. The compact design allows space-saving integration into housings, test environments, or control systems. An EVA insulating layer provides additional protection when mounting on conductive surfaces.
- VGA interface: HD15, connector, 2-row
- Connection technology: Screw terminal with pressure plate
- Connection range: 18–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.7 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +105 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 64 × 31 × 18 mm (L × W × H)
- Push-in terminal for quick wiring: Single wires (18–26 AWG) can be quickly plugged in—all you need to disconnect them is a flat-head screwdriver ≤ 2.5 mm.
- Shielded Cat.5e RJ45 socket for structured network connection: The shielded 8P8C socket enables direct connection to Ethernet components – ideal for reliable signal transmission in control systems, test equipment, or embedded systems.
- Compact design for flexible integration: With a height of only 33 mm, the adapter can also be used in tight housings, mobile test environments, or compact distribution panels – without additional mounting devices.
- Versatile use in industry: Ideal for embedded solutions, temporary test stations, control cabinet wiring, or the fast connection of network signals in prototyping – particularly suitable for frequent changes.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure stable signal quality in test, control, or communication applications.
The InLine® RJ45 terminal block adapter with push-in terminal strip enables fast, solder-free connection of Ethernet signals with open wire ends – without tools. The shielded RJ45 socket (8P8C) is directly connected to an 8-pin push-in terminal block that reliably accommodates single wires in the range of 18–26 AWG.
The push-in spring technology saves time and is particularly suitable for applications where frequent wire changes or temporary wiring are necessary. A flat-head screwdriver ≤ 2.5 mm is all that is needed to securely loosen the connections.
Thanks to its compact design (only 33 mm high), the adapter can be accommodated in housings, test setups, or prototyping environments to save space. Ideal for Cat.5e Ethernet applications in laboratories, service, or industrial environments.
- RJ45 interface: Cat.5e, 8P8C socket (shielded)
- Terminal system: Push-in terminal (spring-loaded technology)
- Number of poles: 8 signals (1:1 connected)
- Connection range: 18–26 AWG (solid or stranded conductor with ferrule)
- Actuation: Release with flat-blade screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 36 × 24 × 18 mm (L × W × H)
- Time savings during installation: Fast wiring via screw terminals for 18–24 AWG – tool-assisted with flat-head screwdriver ≤ 2 mm.
- Stable connection thanks to screw lock: The D-Sub-9 connector is equipped with an integrated screw lock and ensures a secure mechanical connection to the matching socket – even in the event of vibration or movement.
- Versatile use in industry: Ideal for automation, machine and plant engineering, control cabinet installations, and mobile test and service applications.
- Compact design: The terminal block can be easily integrated even in limited space – whether on a DIN rail or in mobile units.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1 A per pin ensure reliable signal transmission – even in continuous industrial applications.
The InLine® terminal block with D-Sub 9 connector and screw terminal connections was developed for professional use in serial signal wiring. The screw terminals with a 3.96 mm pitch enable secure connection of single wires in the 18–24 AWG range. They are operated using a standard flat-blade screwdriver with a blade width ≤ 2 mm.
The integrated screw lock ensures a stable connection to matching D-Sub sockets – even with vibration or frequent plugging. The EVA insulation layer on the underside provides additional protection when mounting on conductive surfaces. The compact design makes this terminal block a practical, durable solution for industrial applications where reliability, flexibility, and ease of use are required.
- D-Sub 9 connector: With integrated screw lock
- Connection technology: Screw terminal, pitch 3.96 mm
- Connection range: 18–24 AWG
- Actuation: With flat-blade screwdriver ≤ 2 mm
- Rated current: 1 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10°C to +70°C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 38 × 37 × 16 mm (L × W × H)
- Time savings during installation: The spring-cage terminals enable quick wiring with a flathead screwdriver (≤ 2.5 mm) – no soldering or crimping required.
- Stable connection thanks to screw lock: The D-Sub 9 female connector is equipped with an integrated screw lock and ensures a secure mechanical connection to matching plugs – even in the event of vibration or movement.
- Versatile use in industry: Particularly suitable for automation, machine and plant engineering, service and test setups, and control cabinet construction.
- Compact design: Saves space on DIN rails or in tight enclosures – ideal for integration into existing systems.
- High signal quality: An insulation resistance of ≥ 10 MΩ and a rated current of 0.8 A per pin ensure reliable, low-interference signal transmission.
The InLine® terminal block with D-Sub 9 socket and integrated spring clamp technology was specially developed for industrial applications that require serial signal transmission, e.g., via RS232. The tool-assisted spring clamp technology allows quick and secure connection of individual wires without soldering or crimping. The connection range supports 14–22 AWG and can be conveniently operated with a flat-blade screwdriver ≤ 2.5 mm.
Thanks to the screw lock on the socket, a stable connection with mating connectors is guaranteed – even with movement or vibration. The compact design with EVA insulation on the underside protects against conductive surfaces during installation and makes the module ideal for use in control systems, machines, and test environments.
- D-Sub 9 socket: With integrated screw lock
- Spring terminals: 5 mm pitch
- Connection range: 14–22 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.8 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10°C to +70°C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 51 × 31.5 × 18 mm (L × W × H)
- Time savings during installation: Quick wiring via screw terminals for 18–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to screw lock: The 2-row D-Sub-15 connector is equipped with a mounting thread (UNC #4-40) and enables secure mechanical fixation with matching sockets.
- Versatile use in industry: Ideal for serial control lines in automation, mechanical engineering, test stations, or signal distribution.
- Compact design: Measuring approx. 62.5 × 31 × 16 mm, the terminal block can be integrated into existing installations in a space-saving manner – even with high contact density.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.7 A per pin ensure reliable signal transmission.
The InLine® D-Sub 15 terminal block with connector in a 2-row design is ideal for wiring serial signals between control components or for temporary connections in the control cabinet. The screw terminals with pressure plate allow the connection of single wires in the range of 18–26 AWG – without any soldering. Tool-assisted operation is carried out with a flat-head screwdriver ≤ 2.5 mm.
The integrated screw lock (UNC #4-40) ensures a stable, vibration-proof connection to matching sockets. The compact design makes the module particularly suitable for industrial applications with limited space.
- D-Sub 15 plug: 2-row, with mounting thread for plug locking (UNC #4-40)
- Connection technology: Screw terminal with pressure plate
- Connection range: 18–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.7 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +105 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 63 × 39 × 18 mm (L × W × H)
- Push-in terminal for quick wiring: Single wires (18–26 AWG) can be quickly plugged in – a flat-head screwdriver ≤ 2.5 mm is all you need to remove them.
- Cat.5e RJ45 socket with fixed 15 cm connection cable: The shielded 8P8C socket is connected directly to the push-in terminal via a permanently integrated cable (length: 15 cm) – for flexible connections in confined spaces.
- Space-saving cable solution for flexible integration: Thanks to its compact design and connected cable, the adapter is ideal for mobile measuring stations, embedded projects, or control cabinet installations.
- Versatile use in industry: Perfect for temporary network connections, diagnostic tools, control systems, or prototyping – particularly suitable for changing test scenarios.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable signal transmission – even in continuous industrial operation.
The InLine® RJ45 terminal block adapter with permanently integrated 15 cm cable and 8-pin push-in terminal connects structured Ethernet signals (Cat.5e) with open wire ends – without soldering or screws. The shielded RJ45 socket (8P8C) is connected directly to the push-in terminal via a robust cable.
The push-in technology allows tool-free connection of wires in the 18–26 AWG range. If necessary, the connection can be disconnected using a flat-head screwdriver ≤ 2.5 mm via the color-coded buttons – ideal for frequent rewiring in test or prototype environments.
With a cable length of approx. 15 cm and an outer diameter of approx. 6 mm (shielded round cable), the adapter is also suitable for tight installation situations, e.g., in mobile test equipment or control cabinets. The shielded design and tested quality (short-circuit and wiring test) make it a robust solution for industrial networks and embedded applications.
- RJ45 interface: Cat.5e, 8P8C socket (shielded)
- Cable length: 15 cm (Cat.5e, shielded, 4×2 wires, 24 AWG, flexible)
- Terminal system: Push-in terminal (spring-loaded technology)
- Number of poles: 8 signals (1:1 connected)
- Connection range: 18–26 AWG (solid or stranded conductor with ferrule)
- Actuation: Release with flat-head screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Dimensions without cable: approx. 43 × 33 × 20 mm (L × W × H)
- Time savings during installation: Quick wiring via screw terminals for 18–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to knurled screw: The D-Sub-9 socket is equipped with knurled screws and ensures secure, tool-free attachment to matching connectors.
- Versatile use in industry: Suitable for control technology, mechanical engineering, test setups, diagnostic purposes, and training systems.
- Breakout design with pressure plate: Individual wires can be connected quickly and flexibly to the screw terminals on the rear – ideal for laboratory or field use.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.8 A per pin ensure reliable signal transmission – even in continuous industrial applications
The InLine® D-Sub 9 breakout terminal block with female connector is ideal for use in test benches, laboratory environments, prototyping applications, or the commissioning of machine components. Individual wires in the 18–26 AWG range can be securely connected via rear screw terminals with pressure plate technology. Wiring is tool-assisted using a flat-blade screwdriver with a blade width ≤ 2.5 mm.
The socket is equipped with knurled screws (#4-40 UNC) that ensure secure, tool-free attachment to matching plugs. An EVA insulating layer provides protection when mounting on conductive surfaces. Thanks to clear terminal labeling and a robust design, the breakout adapter is ideal for test stations, control projects, and mobile service setups.
- D-Sub 9 socket: Breakout design, with knurled screws (#4-40 UNC)
- Connection technology: Screw terminal with pressure plate
- Connection range: 18–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.8 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +105 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 66.7 × 34.4 mm (L × W)
- Accessories: 1× pressure plate, 2× screws
- Time savings during installation: Quick wiring via screw terminals for 18–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to screw lock: The 2-row D-Sub-25 female connector is equipped with a mounting thread (UNC #4-40) and enables secure mechanical fastening with matching plugs.
- Versatile use in industry: Ideal for structured wiring in control cabinets, control and automation systems, or signal distribution.
- DIN rail mounting for standard-compliant installation: The integrated DIN rail housing enables direct mounting on mounting rails – quickly, securely, and in a space-saving manner.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.7 A per pin ensure reliable signal transmission – even under continuous load.
The InLine® D-Sub 25 terminal block with female connector in a 2-row design was specially developed for structured installations on DIN rails. The screw terminals with pressure plate enable tool-assisted connection of single wires in the 18–26 AWG range – quickly and securely with a flat-head screwdriver ≤ 2.5 mm.
The socket has an integrated screw lock (UNC #4-40) for secure connection with matching D-Sub plugs. The pre-assembled DIN rail housing facilitates installation in control cabinets and on mounting rails. The compact design and robust construction make the connection block the ideal choice for industrial applications with high signal density.
- D-Sub 25 female connector: 2-row, with mounting thread for plug locking (UNC #4-40)
- Connection technology: Screw terminal with pressure plate
- Connection range: 18–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.7 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +105 °C
- Insulation layer: EVA insulation on underside
- Mounting: Housing for direct mounting on DIN rail
- Dimensions: approx. 87 × 79 × 51 mm (H × W × D)
- RJ45 breakout socket with clear terminal assignment: Shielded 8P8C socket directly connected to 9-pin screw terminal – for structured and solder-free network wiring.
- Side terminal connection for compact integration: The side-mounted screw terminal strip allows for space-saving wiring – ideal for control cabinets or dense test environments.
- Direct mounting on DIN rail: The housing is equipped with a pre-mounted DIN rail clip – for easy and standard-compliant installation in control cabinets or control distributors.
- Ideal for industrial networks: For secure connection, diagnosis, or rewiring of Ethernet signals in service, test, or embedded environments.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable signal transmission – even in continuous industrial operation.
The InLine® RJ45 breakout adapter with shielded 8P8C socket and integrated 9-pin screw terminal (8 data lines + shield) enables direct and structured wiring of Ethernet signals – without any soldering. The side-accessible terminal strip is clearly labeled and supports wires in the range of 16–26 AWG.
Tool-assisted wiring is performed with a flat-head screwdriver ≤ 2.5 mm. The pre-mounted clip allows the adapter to be mounted directly on a DIN rail – ideal for standard-compliant integration in control cabinets or control distributors.
The robust design, tested electrical safety, and complete shielding make the adapter a reliable solution for industrial applications, e.g., in prototyping, network diagnostics, or embedded systems.
- RJ45 interface: Shielded 8P8C socket (breakout version)
- Screw terminal strip: 9 terminals (8 data + shield), 5.0 mm pitch, with pressure plate
- Connection range: 16–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Mounting: Pre-mounted clip for DIN top-hat rail
- Dimensions: approx. 60.45 × 53.6 × 43.0 mm (W × H × D)
- Time savings during installation: Quick wiring via screw terminals for 18–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to screw lock: The 2-row D-Sub-25 plug is equipped with a mounting thread (UNC #4-40) and enables secure mechanical fastening with matching sockets.
- Versatile use in industry: Ideal for serial control lines in mechanical engineering, automation, test benches, or signal distribution.
- Compact design: Measuring approx. 86.5 × 53.3 × 18 mm, the terminal block can be integrated into existing installations in a space-saving manner, even with a high number of pins.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.7 A per pin ensure reliable signal transmission – even under continuous load.
The InLine® D-Sub 25 terminal block with connector in a 2-row design is the ideal solution for serial point-to-point connections with up to 25 wires. The screw terminals with pressure plate enable quick and secure connection of single wires in the 18–26 AWG range – without any soldering. Tool-assisted wiring is carried out with a flat-head screwdriver ≤ 2.5 mm.
The integrated screw lock (UNC #4-40) ensures a stable connection to the matching socket – vibration-proof and repeatably detachable. Thanks to its compact design, the terminal block is particularly suitable for industrial applications with high signal density and limited space.
- D-Sub 25 connector: 2-row, with mounting thread for connector locking (UNC #4-40)
- Connection technology: Screw terminal with pressure plate
- Connection range: 18–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.7 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +105 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 87 × 53 × 18 mm (L × W × H)
- Time savings during installation: Two screw terminal strips for 8 wires plus shielding each enable fast, solder-free wiring – tool-assisted with a flat-head screwdriver ≤ 2.5 mm, suitable for 16–26 AWG.
- Dual RJ45 interface with separate signal routing The two standardized RJ45 sockets (8P8C) in a straight design are independently connected – ideal for parallel cable routing, redundancy solutions, or testing purposes.
- DIN rail mounting for orderly system integration: Robust housing with pre-mounted DIN rail clip – ideal for structured network and control cabling in control cabinets.
- Versatile use in industry: Suitable for Ethernet signal distribution, machine communication, embedded projects, or network diagnostics in test environments.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable and secure data transmission – even under continuous load in industrial environments.
The InLine® terminal block with two RJ45 sockets (8P8C, straight version) and separate terminal assignment was developed for structured network connections in control cabinets, test environments, or embedded systems.
Both sockets are completely independently connected to a screw terminal strip with 9 connections (8 signals + shield) – ideal for parallel signal routing, redundancy solutions, or comparative measurements.
The terminal strips (5.0 mm pitch) support single wires in the 16–26 AWG range and can be wired with a flat-blade screwdriver ≤ 2.5 mm.
Thanks to the pre-mounted DIN rail clip, the module is immediately ready for standard-compliant integration into common mounting rail systems.
The robust design, well-thought-out signal routing, and tested short-circuit and miswiring protection make the adapter the ideal choice for demanding industrial Ethernet applications.
- RJ45 interface: 2x 8P8C socket (straight design)
- Screw terminal strip: 2x 9 terminals (8 signals + shield), 5.0 mm pitch, with pressure plate
- Connection range: 16–26 AWG
- Actuation: With flat-head screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Mounting: Prepared for DIN top-hat rail
- Dimensions: approx. 60 × 90 × 19 mm (W × H × D)
- Time savings during installation: Quick wiring via screw terminals for 16–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Clear terminal assignment & secure contact: 5-pin terminals with pressure plate, clearly labeled 1: –, 2: D+, 3: D–, 4: +, 5: S (shield) – ideal for service, testing, and prototyping.
- Versatile industrial use: For quick connection of USB 2.0 signals in test setups, laboratories, commissioning, or troubleshooting – no soldering required.
- Compact design: Only approx. 50 mm total length; can also be integrated into tight setups or adapter strips to save space.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.7 A per pin ensure reliable signal transmission – even under continuous load and in industrial environments.
The InLine® USB-A terminal block adapter offers a practical solution for transferring USB-2.0 signals to a 5-pin terminal block without soldering or cable connection. Typical applications can be found in the areas of service, test setups, development, or prototyping.
The standard-size USB-A socket is directly connected to a 5-pin screw terminal block. The clear labeling of the terminals – 1: Ground (–), 2: D+, 3: D–, 4: Voltage (+), 5: Shield (S) – enables easy and reliable signal assignment. The terminal connections with a 5.0 mm grid dimension support single wires in the 16–26 AWG range.
Wiring is carried out with the aid of a flat-head screwdriver. Thanks to its compact housing, the adapter is particularly space-saving – e.g. in test equipment, mobile measuring stations, or in laboratories.
- USB interface: USB-A 2.0, female connector
- Number of pins / assignment: 5 terminals / 1: – / 2: D+ / 3: D– / 4: + / 5: S
- Connection technology: Screw terminal with pressure plate, 5.0 mm pitch
- Connection range: 16–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.7 A per pin
- USB operating voltage (VBUS): 5 V DC
- Test voltage (insulation resistance): 300 V AC / 1 minute
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +105 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 50 × 21 × 14 mm (L × W × H)
- Time savings during installation: The 5-pin screw terminal block with pressure plate allows for quick, tool-assisted wiring – for wires in the 16–26 AWG range.
- Standardized IDC interface with clear pin assignment: The 10-pin socket (2×5) ensures clean signal separation – ideal for structured wiring in test, control, and laboratory applications.
- Space-saving PCB solution with logical arrangement: Compact design on a stable PCB for direct integration into housings, adapter panels, or test environments.
- Flexible use in industry: Suitable for commissioning, embedded projects, signal distribution, or control lines in digital systems.
- High signal quality: Tested insulation resistance up to 300 V AC, rated current 1 A per pin, and 100% short-circuit testing for long-term operational safety.
The InLine® IDC-10-to-terminal block adapter with 5-pin screw terminal strip offers a compact solution for connecting digital signals, power lines, or control connections—without soldering. The combination of IDC socket (2×5) and side-accessible terminal strip is mounted on a robust printed circuit board and optimized for industrial environments.
The screw terminals (5.0 mm pitch) are clearly labeled and support stranded wires in the range of 16–26 AWG. Tool-assisted wiring is performed using a flat-blade screwdriver ≤ 2.5 mm. An EVA insulating layer provides protection during installation on conductive surfaces. With 100% short-circuit testing and high insulation values, the adapter is ideal for test systems, control devices, or embedded applications.
- IDC interface: 10-pin IDC socket (2×5), pitch 2.54 mm
- Screw terminal block: 5 terminals, pitch 5.0 mm, with pressure plate
- Signal assignment: GND (ground), D0 to D3 (digital signal lines, assignable depending on application)
- Connection range: 16–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 1.0 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Max. conductor resistance: 5 ohms
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 50 × 21.2 × 18.4 mm (L × W × H)
- Time savings during installation: Quick wiring via screw terminals for 14–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to mounting thread: The D-Sub-9 receptacle is equipped with a mounting thread (UNC #4-40) for plug locking and ensures a secure connection to matching plugs.
- Versatile use in industry: Ideal for control cabinet construction, machine control, automation, and service and diagnostic environments.
- DIN rail mounting for structured installations: The integrated DIN rail clip allows direct mounting in the control cabinet – space-saving and compliant with standards.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.8 A per pin ensure reliable signal transmission in professional applications.
The InLine® D-Sub 9 terminal block with female connector has been specially developed for structured installations in control cabinets or on DIN top-hat rails. The side-accessible screw terminals with pressure plate mounting enable quick wiring of single wires in the 14–26 AWG range, without any soldering. Assembly is tool-assisted with a flat-head screwdriver ≤ 2.5 mm.
Thanks to the mounting thread (UNC #4-40), the socket can be mechanically secured with matching connectors. The housing design with integrated DIN rail clip allows quick mounting on DIN rails. The EVA insulating layer on the underside provides additional protection when mounting on conductive surfaces.
- D-Sub 9 female connector: Breakout design, with mounting thread for connector locking (UNC #4-40)
- Connection technology: Screw terminal with pressure plate
- Connection range: 14–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.8 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Mounting: Housing for direct mounting on DIN rail
- Dimensions: approx. 87 × 46 × 51 mm (L × W × H)
- Time savings during installation: Quick wiring via screw terminals for 12–22 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to screw lock: The D-Sub-9 socket is equipped with an integrated screw lock and ensures a secure mechanical connection to the matching socket – even in the event of vibration or movement.
- Versatile use in industry: Ideal for automation, machine and plant engineering, control cabinet installations, and mobile test and service applications.
- Compact, 2-row design: Measuring 45.5 × 31 × 16 mm, the terminal block offers a space-saving arrangement – especially in dense wiring of Sub-D interfaces.
- High signal quality: An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 1 A per pin ensure reliable signal transmission – even in continuous industrial applications.
The InLine® terminal block with D-Sub 9 socket in a 2-row design is designed for professional wiring solutions in control cabinet and device construction. The screw terminals with a 5.0 mm pitch enable the secure connection of single wires in the 12–22 AWG range. Assembly is tool-assisted using a flat-blade screwdriver with a blade width ≤ 2.5 mm.
The D-Sub socket can be securely screwed to the mating connector via an integrated screw lock, thus ensuring a vibration-proof connection. An EVA insulating layer provides protection when mounting on conductive surfaces. The compact 2-row design makes the connection block particularly suitable for industrial installations with high packing density – e.g., in control cabinets, machines, or mobile service units.
- D-Sub 9 socket: 2-row, with integrated screw lock
- Connection technology: Screw terminal, 5.0 mm pitch
- Connection range: 12–22 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 1 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10°C to +70°C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 46 × 31 × 18 mm (L × W × H)
- Time savings during installation: The 10-pin screw terminal block with pressure plate allows for quick, tool-assisted wiring – for wires in the 16–26 AWG range.
- Standardized IDC interface with clear pin assignment: The 20-pin socket (2×10) ensures structured signal separation – ideal for orderly system wiring in test, control, and prototype environments.
- Compact design for structured installation: Compact design on a sturdy printed circuit board for direct integration into housings, adapter panels, or test environments.
- For modular control and test systems: Ideal for prototyping, embedded applications, system tests, or signal distributors with IDC ribbon cables.
- High signal quality: Tested insulation resistance up to 300 V AC, rated current 1 A per pin, and 100% short-circuit testing for long-term operational reliability.
The InLine® IDC-20-to-terminal block adapter connects a 20-pin IDC socket (2×10) to a 10-pin screw terminal strip for easy signal wiring – no soldering required. The robust design on a stable circuit board is particularly suitable for structured installations in test benches, control devices, or embedded systems.
The screw terminals (5.0 mm pitch) are clearly labeled and support single wires from 16–26 AWG. Wiring is tool-assisted with a flat-head screwdriver ≤ 2.5 mm. An EVA insulating layer provides reliable protection when mounting on conductive surfaces.
Thanks to 100% short-circuit and wiring testing and standardized signal routing, the adapter is ideal for professional use in industrial test environments, prototypes, or control cabinets.
Note: Two adjacent IDC pins are internally connected to a screw terminal (e.g., pins 1+2 → terminal 1).
- IDC interface: 20-pin IDC socket (2×10), pitch 2.54 mm
- Screw terminal strip: 10 terminals, pitch 5.0 mm, with pressure plate
- Signal assignment: GND (ground), D0 to D7 (digital signal lines, assignable depending on application)
- Connection range: 16–26 AWG
- Actuation: With flat-head screwdriver ≤ 2.5 mm
- Rated current: 0.8 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Max. conductor resistance: 5 ohms
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 71 × 51 × 48.7 mm (W × H × D)
- Time savings during installation: Quick wiring via screw terminals for 16–24 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
- Stable connection thanks to screw lock: The 2-row D-Sub-15 connector is equipped with a mounting thread (UNC #4-40) and enables secure mechanical fixation with matching sockets.
- Versatile use in industry: Ideal for serial control lines in control cabinets, test benches, control systems, or building automation.
- DIN rail mounting for structured installations: The robust DIN rail housing allows direct mounting on mounting rails – standard-compliant, secure, and space-saving.
- High signal quality: An insulation resistance ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable signal transmission – even under continuous load.
The InLine® D-Sub 15 terminal block with connector in a 2-row design is ideal for structured wiring in control cabinets. Individual wires in the 16–24 AWG range can be connected quickly and securely via the side-accessible screw terminals with pressure plate. Tool-assisted wiring is carried out with a flat-head screwdriver ≤ 2.5 mm.
The integrated screw lock (UNC #4-40) ensures a secure connection with matching sockets – vibration-proof and durable. The compact design and pre-assembled DIN rail clip enable quick and standard-compliant top-hat rail mounting in industrial environments.
- D-Sub 15 connector: 2-row, with mounting thread for connector locking (UNC #4-40)
- Connection technology: Screw terminal with pressure plate
- Connection range: 16–24 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 1 A per pin
- Max. operating voltage: 100 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –10 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Mounting: Housing for direct mounting on DIN rail
- Dimensions: approx. 87 × 53 × 51 mm (L × W × H)
- Time savings during installation: Quick wiring via 37 side-mounted screw terminals for 18–26 AWG – tool-assisted with flat-blade screwdriver ≤ 2.5 mm.
- Stable connection thanks to screw lock: The D-Sub 37 connector is equipped with a mounting thread (UNC #4-40) and enables secure mechanical fastening with matching sockets – vibration-proof and durable.
- Versatile use in industry: Ideal for signal distribution, test stations, control units, or temporary measurement systems with high connection density.
- Side-mounted terminal strip: The connections are positioned next to each other – ideal for limited depth and many signal wires on one level.
- High signal quality: An insulation resistance ≥ 10 MΩ at 300 V DC and a rated current of 0.8 A per pin ensure reliable signal transmission – even under continuous load.
The InLine® D-Sub 37 terminal block with connector is designed for professional signal wiring in laboratory, service, or machine environments. The side-mounted screw terminals with pressure plate enable quick connection of single wires in the 18–26 AWG range without soldering. Operation is performed with a flat-blade screwdriver ≤ 2.5 mm.
The robust screw lock (UNC #4-40) ensures a secure connection to the opposite end. The wide 2-row layout is ideal for applications with many individual signals in a confined space – e.g., signal distributors, adapters, or measuring devices in control cabinets or test areas.
- D-Sub 37 connector: 2-row, with mounting thread for connector locking (UNC #4-40)
- Connection technology: Screw terminal with pressure plate (side-mounted)
- Connection range: 18–26 AWG
- Actuation: With flat-blade screwdriver ≤ 2.5 mm
- Rated current: 0.8 A per pin
- Max. operating voltage: 70 V between two signals
- Insulation resistance: ≥ 10 MΩ @ 300 V DC
- Operating temperature: –20 °C to +70 °C
- Insulation layer: EVA insulation on underside
- Dimensions: approx. 115.2 × 70 × 43 mm (L × H × D)
