- USB A male to OPEN END with open and shoveled terminals
- Compatible with USB 2.0 standards
- Supports data transfer rates up to 480Mbit/s
- Double shielding (strands and braid shielding already tinned)
- Filament: 2x AWG24 + 2x AWG28
- Outer diameter: 4.5mm
- USB 2.0 mainboard connector (10pin) to USB 3.0 internal USB connector (19pin)
- suitable for internal USB 3.0 devices, data transfer rate max. USB 2.0 (!)
- USB type C plug to USB type C panel jack
- Opening for USB socket approx. 9x3.5mm, hole spacing: approx. 25mm
- Thread length of the enclosed screws #4-40 approx. 15mm
- 1:1 assignment
- Colour: black
- max. 10 Gb/s (USB 3.2 Gen.2)
- Supports power delivery up to 100W
- Length: approx. 0.2m
- USB A female to USB A installation female
- Opening for USB connector approx. 9x16mm, hole spacing: 25mm
- Thread length of the attached screws #4-40 approx. 15mm
- 1:1 assignment
You will receive 120 pieces of item 33440E packed in a plastic bag to protect against moisture and an outer box.
InLine USB 2.0 connection cable plug A to built-in socket A. External extension cable with attachment option. 2 screws with thread #4-40 and thread length 8mm are included with the cableInLine Bulk ecoPacks are environmentally friendly bulk packaging in which the items are only packed in a PE bag to protect against moisture and in a uniform box. The packaging unit varies depending on the item size for optimal utilization. InLine Bulk ecoPacks are particularly suitable for direct use, e.g. B. for your own use or for installation at the customer's site. You get the proven InLine quality with minimal packaging. This saves time and money and protects the environment.
- More economical: quick unpacking saves you time
Ideal for use by customers - More environmentally friendly: Less packaging (small waste)
The cables are packed together in a PE bag to protect against moisture. Individual slip bags are no longer needed. - More economical:
The packaging is based on the optimal utilization of the carton capacity. Resources are optimally used and utilized. - Cheaper: price advantage through bulk purchase
5% below the individual/normal price
- USB A female to USB B installation plug
- Opening for USB B connector approx. 11x13mm, hole spacing: 25mm
- Thread length of the attached screws #4-40 approx. 15mm
- 1:1 assignment
- USB C female plug to USB C installation female plug
- Opening for USB connector approx. 9x3.5mm, hole spacing: 25mm
- Thread length of the attached screws #4-40 approx. 15mm
- max. 5Gb/s (USB 3.1 Gen.1)
- Compatible with Power Delivery 3.0 up to 100W
- USB A plug to post socket 4pin
- red=VCC (+5V), green=Data+ (D+), white=Data- (D-), black=GND (ground)
- USB 3.0 mainboard connector (19pin) to 2x USB 2.0 internal USB connector (8-pin, 2-rows)
- suitable for up to two USB 2.0 data transfer rate max. USB 2.0
- USB B plug to post socket 4pin
- red=VCC (+5V), green=Data+ (D+), white=Data- (D-), black=GND (ground)
- 2x 5-pin male connector to female connector
- 1:1 assignment
- 2x USB A male to 19pin. mainboard connector
- 2x USB A female to 19pin. mainboard connector
- USB A plug to post socket 4pin
- red=VCC (+5V), green=Data+ (D+), white=Data- (D-), black=GND (ground)
- Internal USB 3.0 extension
- 19 pin USB 3.0 connection port (mainboard) male to female
- USB A socket to post socket 4pin
- red=VCC (+5V), green=Data+ (D+), white=Data- (D-), black=GND (ground)
- USB A female to USB A installation female, gold plated contacts
- Opening for USB connector approx. 9x16mm, hole spacing: 25mm
- Thread length of the attached screws #4-40 approx. 15mm
- 2x 4pin post-plug to post-socket
- red=VCC (+5V), green=Data+ (D+), white=Data- (D-), black=GND (ground)
- Expands your motherboard with two USB-A ports: Converts an internal 19-pin motherboard header with 2mm pitch into 2x USB-A sockets for permanent case mounting and creates additional interfaces.
- USB 3.2 Gen.1 with 5Gb/s data transfer rate: Supports fast data transfer via the internal USB header and is suitable for USB sticks, storage solutions, and other USB devices with high bandwidth.
- Stable screw connection thanks to M3 thread in the flange: The USB-A sockets have integrated M3 threads. With a hole spacing of 47.5 mm and an installation depth of 31.5 mm, secure integration is possible.
- Reliable signal quality thanks to high-quality materials: AWG24/28 wire cross-section, gold-plated contacts, and nickel-plated clamps support a constant and stable connection.
- Flexible cable length for clean installation: With a length of approx. 45 cm including connectors, the internal USB cable offers sufficient leeway for structured case mounting. Includes 2 M3x10 mm screws.
With this USB 3.2 Gen.1 cable, you can expand your motherboard with two permanently integrated USB-A ports.
The internal 19-pin motherboard pin header with 2 mm pitch is plugged directly into the corresponding header. On the opposite side, there are two USB-A sockets that can be securely screwed into the case using the integrated M3 thread in the flange.
The cable is compatible with USB 3.2 Gen.1 and supports data transfer rates of up to 5Gb/s. This makes it suitable for fast data transfers between PCs and USB devices.
The AWG24/28 wire cross-section supports stable signal transmission within the case. Thanks to a hole spacing of 47.5 mm and an installation depth of 31.5 mm, planning-friendly integration is possible.
The length of approx. 45 cm including connectors offers sufficient flexibility for different housing concepts. Gold-plated contacts and a nickel-plated clamp support a reliable connection even with frequent plugging and unplugging. Two M3x10 mm screws for direct mounting are included in the scope of delivery.
- Connectors: Side A: 1x 19-pin motherboard header connector, grid dimension: 2 mm Side B: 2x USB-A socket
- Wire cross-section AWG24/28
- Gold-plated contacts, nickel-plated clamp
- Compatible with USB 3.2 Gen.1, data transfer rate up to 5Gb/s
- Color: black
- Length including connectors: approx. 45cm
- Screw hole spacing: 47.5mm, installation depth 31.5mm
- Includes 2 M3x10mm screws
