InLine® Slim round Patch Cable U/FTP Cat.6A black
- Round slim patch cable, diameter only 4mm
- U/FTP shielded: Pairwise in metal foil (PiMf)
- meets the requirements of Cat. 6A requirements up to 500MHz
- Four wire pairs, twisted
- Full copper strands
- 1:1 assignment, color-coded according to EIA/TIA-568B
- 2x RJ45 connector, moulded, with snap-in protection
- blue coloured connector for differentiation
- PVC jacket, extra thin, for better installation in network cabinet, flexible handling
- in resealable PE bag
InLine® Patch cable, S/FTP (PiMf), Cat.6A, halogen-free
Patch cable in the highest quality for a professional cabling in Gigabit and 10 Gigabit range, for use in data centers and server racks
- Assignment according to TIA/EIA 568B2.1
- cable construction S/FTP (PiMf) 4x2xAWG26/7
- overall braided shield with paired foil shield
- Cable sheath halogen free, LSZH, conform to standards IEC 60332-1-2, IEC 60754-1, IEC 60754-2, IEC 61034 IEC332-1
- plug RJ45 (8P8C) with 50µ" gold plated contacts and with special design and latch protection
- blue colored plug for easy distinction
- For Gigabit and 10 Gigabit applications
- to 500MHz: 100% Cat.6 test and 100% Cat.6A test (Fluke Channel Link Test) including the attached test protocol and serial number
- in reclosable PE bag with EAN code
InLine® Patch cable slim, Cat.6A, S/FTP, TPE (LSZH) flexible, PoE
- Space-saving design for maximum port density: Approx. 40 % less space required than conventional AWG26 patch cables – ideal for network cabinets and server rooms.
- High-quality copper conductors for maximum performance: Full Cat.6A transmission quality with up to 10 Gbit/s over lengths of up to 30 meters.
- PoE support up to 87 watts (4PPoE): Enables energy-efficient operation of IP cameras, access points or VoIP telephones without additional power supply units.
- Sustainable & economical: Approx. 25% material savings reduce transportation and manufacturing costs and improve the CO₂ balance.
- Flexible, safe TPE sheath (LSZH): Flame-retardant, halogen-free and particularly flexible for narrow installation paths.
The InLine® Slim Cat.6A S/FTP patch cable series combines highest network performance with maximum space and energy efficiency. Thanks to the particularly slim design with AWG28 conductors, these cables enable a significantly higher port density in network cabinets and ensure improved air circulation, which increases cooling and efficiency.
In contrast to conventional, thinner AWG32 cables, this cable supports full Cat.6A transmission quality at up to 500 MHz and 4PPoE with up to 87 watts. This makes it the ideal solution for professional applications where a combination of space-saving, PoE capability and high performance is required.
The use of high-quality copper conductors minimizes signal loss and ensures a reliable network connection - even over distances of up to 30 metres. The S/FTP double shielding reliably protects the cable from electromagnetic interference.
In addition to its technical performance, this cable also offers ecological benefits: Approx. 25% less material used reduces transportation costs and, in the long term, environmental taxes in accordance with future Green Law requirements.
The TPE sheath (LSZH) combines flexibility with fire protection: It is halogen-free, flame-retardant and ensures minimal smoke development in the event of fire – ideal for safety-critical applications.
Additional technical specifications:
- Conductor material: Pure copper
- Cable construction: S/FTP (pair and overall shielding)
- Sheath material: TPE (LSZH – Low Smoke Zero Halogen)
- Wire gauge: AWG28
- Operating temperature: -20 to +75 °C
- Outlet diameter: 4.1 mm
- Population: 1:1 according to T568B
- PoE support: Yes, up to 87 watts (4PPoE)
InLine® Flat patch cable, U/FTP, Cat.6A
- Flat patch cable
- U/FTP Shielded: Pairs in metal foil (Pimf)
- Meets the Cat.6A requirements up to 500MHz
- Four pairs twisted
- Full copper conductors
- 1:1 assignment, color-coded according to EIA/TIA-568B
- 2x RJ45, moulded, with latch protection
- Blue colored connector
- PVC jacket, extra flat
- Flexible and easy to install
- In PE slip bag with EAN code
InLine® Patch cable, Cat.6A, S/FTP, TPE flexible, 500MHz
- Cat.6A patch cable
- S/FTP (PiMf) shielding, pairs in metal foil shielded with braid overall screen
- Cable with TPE sheath, 500MHz, halogen free
- Flexible cable, resistant
- provides super small bending radium to till min.10mm
- RJ45 plug on both sides, with blue-transparent dyed plastic
- Gold plated contacts, 750 cycles min.
- 4x2xAWG26 full copper strands
- Assignment 1:1, according to T568B
- Supports POE/POE+
- In resealable PE bag with EAN code
InLine® Patch cable, Cat.6A, S/FTP, PE outdoor, black
InLine® PE Outdoor professional, high-quality patch cable for Lan data networks in Cat.6A with double S/FTP shielding (PiMf). Thanks to its ultraviolet (UV), oil and water-resistant polyethylene (PE) sheathing, this LAN cable is suitable for outdoor applications such as standard IP and POE/POE+ video surveillance systems. It supports 10 Gigabit (10 Gbps) transmissions with a maximum frequency of 500Mhz and Fast Ethernet connections to switches, routers, hubs, cards, print servers and all active and passive network peripherals in highly professional and industrial environments such as data centres and server farms.
- Cat.6A Patch cable
- S/FTP (PiMf) shielding, pairs in metal foil with braiding
- cable with PE sheet
- Resistant against oils and water, ideal for outdoor usage
- RJ45 plug on both sides, with blue-transparent inlay
- gold plated contacts, minimum 750 plug cycles
- 4x2xAWG27 full copper stranded wire
- Pin asignment 1:1, following to T568B
- POE/POE+ compatible
- for temperature range -10°C ... +60°C
- in a resealable zip bag with EAN barcode
InLine® patch cable extension, RJ45 protector, S/FTP (PiMf), Cat.6A, 0.2m
Short Cat.6A S/FTP patch cable extension as RJ45 protector against mechanical damage when stressing the RJ45 jack of devices.
- Colour: black
- Side A: RJ45 plug
- Side B: RJ45 jack
- Shielding: S/FTP (PiMf)
- Type: Cat.6 A
- Signal: Network
- Cross-section: AWG 27
- Variant: 1:1 assigned
- Data transmission rate: up to 10 Gb/s
- Conductor material: Copper
- Sheath: halogen-free (LSZH)
Item no.:
76501X
InLine® Patch cable, Cat.6A, S/FTP, PUR industrial, black
InLine® Patch cable, Cat.6A, S/FTP, PUR industrial, black
- Cat.6A Patch cable
- S/FTP (PiMf) shielding, pairs in metal foil with braiding
- cable with PUR sheet, halogen free
- Resistant against oils, ideal for workshop use
- RJ45 plug on both sides, with blue-transparent inlay
- gold plated contacts, minimum 750 plug cycles
- 4x2xAWG26 full copper stranded wire
- Pin assignment 1:1, following to T568B
- in a resealable zip bag with EAN barcode
InLine® Patch cable flat, U/FTP, Cat.6A, TPE halogen-free
- flat patch cable
- U/FTP Shielded: In pairs in metal foil (PiMf)
- fulfils the Cat.6 A requirements up to 500MHz
- Four core pairs, twisted
- solid copper strands
- 1: 1 assignment, colour-coded according to EIA/TIA-568B
- 2x RJ45 plug, moulded, with latching lug protection
- Blue coloured plug for differentiation
- Halogen-free TPE jacket
- flexible and easy to install
- in a resealable PE bag with EAN code
InLine® patch cable, Cat.6A, S/FTP, TPE (LSZH), CCA
- Cost-efficient network solution with high-quality CCA alloy: 40% copper content for improved conductivity and reduced signal loss.
- Powerful for modern networks: Supports up to 10 Gbit/s and a bandwidth of 500 MHz for stable connections.
- 4PPOE support for maximum efficiency: PoE, PoE+ and PoE++ with up to 90 watts of power for network devices such as cameras, access points or VoIP telephones.
- Flexible, flame-retardant cable sheath: The TPE sheath (LSZH) offers high flexibility for tight installation conditions and reduces smoke development in the event of fire.
- Safe & interference-free connection: S/FTP shielding (pair and overall shielding) reliably protects against electromagnetic interference.
The InLine® Cat.6A S/FTP patch cable is the perfect choice for network infrastructures that require high performance at an economical price. Thanks to a high-quality CCA alloy of copper-clad aluminum conductors with 40% copper content, it offers improved conductivity compared to conventional CCA cables. This reduces electrical resistance and enables stable transmission at up to 10 Gbit/s over distances of up to 10 meters.
Another advantage: the cable is 4PPOE-capable and supports PoE, PoE+ and PoE++ with up to 90 watts of power. This means that IP cameras, VoIP telephones and access points can be efficiently supplied with power via the network cable - a cost-effective solution for professional applications.
The double shielding (S/FTP) minimizes interference and ensures a stable connection even in demanding environments such as data centers, industrial halls or office buildings. The halogen-free TPE jacket (LSZH) is not only flame-retardant, but also particularly flexible – ideal for installations with limited space.
Please note: Due to the material properties of CCA, this cable is limited to lengths of up to 10 meters. For longer distances, we recommend our copper patch cables, which guarantee consistent signal quality.
Additional technical specifications:
- Conductor material: High-quality CCA alloy made from copper-clad aluminum conductors (40% copper)
- Sheath material: TPE (LSZH – flame retardant, halogen-free, flexible)
- Operating temperature: -20 to +75 °C
- Outlet diameter: 6.0 mm
- Population: 1:1 according to T568B
- PoE support: 4PPOE, compatible with PoE/PoE+/PoE++ (up to 90 W)
InLine® Patch cable built-in extension, S/FTP (PiMf), Cat.6A, LSZH, copper, black
Cat.6A S/FTP patch cable extension with built-in socket on one side, for mounting on front panels.
InLine® Patch cable armoured, U/FTP, Cat.6A, black
The InLine® Cat.6A armoured patch cable is a robust and powerful Ethernet cable designed for demanding network applications and environments. With armouring for increased mechanical strength, it offers reliable performance in various environments. Thanks to its full shielding and the use of high-quality materials, such as an inner jacket made of SUS204 stainless steel and an outer jacket made of highly elastic PVC, it guarantees high resistance. The InLine® patch cable is equipped with a core insulation layer HDPE - a robust and high-density polyethylene material - that offers excellent insulation properties. This patch cable is ideal for network applications where high quality insulation and signal integrity are required. Overall, armoured patch cords provide a robust solution for environments where traditional cables are not sufficient and ensure a reliable network connection even under demanding conditions. The InLine® patch cable is protected from heavy foot traffic, weather, pests and rodents due to its high quality construction. Ideal for shows, concerts, billboards and advertising signs.
- Cable type: Cat.6A U/FTP
- Conductor: 28AWG
- Insulation material: HDPEJacket: PVC
- Outer diameter: 7.3mm (OD)
- Connector type: 8P8C (RJ45) with 50µ" gold-plated contacts
- Plug type: Fully shielded crimped plug
- Inner jacket: SUS204 (stainless steel)
- Outer sheath: Highly elastic PVC
- Temperature range: Installation 0 to 50 °C, operation -20 to 60 °C
- Bandwidth: 500MHz
- Rated voltage: 30V
- PoE/PoE+/PoE++: (up to 90W)
- Force resistance with short pressure: 2000 N
- Force resistance with sustained pressure: 500 N
- Electrical properties:
- Conductor DC resistance: 28.4 O/100m (maximum)
- Impedance: 100 O
- Capacitance: 5600pF/100m
- Propagation delay: 545ns/100m (maximum)
- Delay: 45 ns/100m (maximum)
- Certification: Passes Fluke DSX 8000 channel test
InLine® Slim RJ45 cable for windows/door use, 2x RJ45 F/F, 1:1, unshielded, 0.3m
The practical InLine® patch cable window conduit is to simply establish a temporary network connection through closed windows or doors. The ultra-thin design of the cable between the two connectors adapts to the shape between window wings and their frames and is simply clamped.
- 2x RJ45 socket
- unshielded connection 1:1 (8-pin)
- can be used for network connections up to 100Mb/s
Item no.:
69991I
InLine® Patch cable, U/UTP, Cat.6A, halogen-free, AWG23 copper, black
This patch cable is specially designed for the transmission of audio/video content to connect transmitter and receiver units in console and video extenders, i.e. devices that use a network cable as a connection cable. The high wire cross-section of AWG23 and the all-copper design also enable image transmission via HDBaseT up to 4K/30Hz over up to 70m without any problems.
- Patch cable U/UTP Cat.6 A with robust metal connectors
- Full copper wires AWG23
- Channel test approved cable
- Supports AV applications / HDBaseT up to 4K/30Hz
- PoE/PoE+ compatible
- 1:1 pinout, 4 twisted pairs
- Screwed metal connectors with gold-plated contacts, which can also be reconnected without special tools
- Sheath halogen-free (LSZH), diameter approx. 7.6mm, black
InLine® LAN Cable drum, Cat.6A, S/FTP, 80m
Cable reel to extend Ethernet links for temporary cable installations at events, demonstrations, training courses, conferences, broadcast vans, trade fairs and in emergencies. Simply unroll the cable and connect patch cables and network devices.
- Complete with Cat. 7 S/FTP-PiMF 1000MHz installation cable
- 80m extension
- integrated data socket Cat. 6A 1xRJ45 socket with dust protection cap
- Cat. 6A Keystone RJ45 socket at cable end
- Cable colour orange for better signal effect
- Dimensions drum with handle: 355x420x240mm
- Operating temperature range: -5°C to +70°C
Item no.:
78592
InLine® 180° Patch Cable S/FTP PiMF Cat.6A 500MHz halogen free Copper black 1m
The InLine® 180° patch cables offer the best transmissio quality and maximum flexibility! The plug of the bare copper black patch cables can be tilted freely around 180° and is optimally suited in tight situations. The halogen-free Cat.6A cables are available in 1 to 10 meters and and has S/FTP (PiMF) Shielding up to 500MHz with a high-quality finish. Please note: Because of the wide of this RJ45 plug, the usability for network devices with densely aligned RJ-45 jacks is limited.
Item no.:
76811X
InLine® Network cable reel IP67 Outdoor PUR, Cat.6A S/FTP
The InLine® network cable reel has been specially designed for use in extremely harsh environments and is ideal for outdoor and industrial applications. It features a robust and durable reel.
With a UL-certified PUR outer sheath, our InLine® mains cable reel offers exceptional resistance to bending, cracking and UV exposure.
The InLine® network cable reel supports PoE, PoE+ and PoE++ applications. The 23AWG cable consists of 4 twisted pairs of pure copper conductors and, thanks to its double S/FTP shielding, offers high immunity to interference and noise caused by external devices. In addition, our InLine® network cable reel is Fluke Channel tested and allows transmission speeds of up to 10GBase-T.
With a UL-certified PUR outer sheath, our InLine® mains cable reel offers exceptional resistance to bending, cracking and UV exposure.
The InLine® network cable reel supports PoE, PoE+ and PoE++ applications. The 23AWG cable consists of 4 twisted pairs of pure copper conductors and, thanks to its double S/FTP shielding, offers high immunity to interference and noise caused by external devices. In addition, our InLine® network cable reel is Fluke Channel tested and allows transmission speeds of up to 10GBase-T.
- Cat.6A S/FTP
- Plug type: Gold-plated RJ45 plugs
- Rated voltage: 30 V
- Outer diameter: 7.8 ± 0.20 mm
- Mounted on a lightweight, robust and durable reel
- UL-certified PUR outer jacket for excellent resistance to abrasion, tensile strength, bending, breakage and UV exposure
- Supports PoE, PoE+ and PoE+ applications
- Cable consists of 4 pairs of twisted copper conductors with a diameter of 23AWG
- Double S/FTP shielding for high immunity to external noise and interference
- Fluke Channel Test up to 10GBase-T transmission rate
- Available in 50m and 90m
InLine® Network cable reel IP67 Outdoor PUR Harting, Cat.6A S/FTP
The InLine® network cable reel has been specially designed for use in extremely harsh environments and is ideal for outdoor and industrial applications. It is equipped with a robust and durable coil and has extremely robust HARTING PushPull metal connectors with IP67 protection on both sides.
The internal locking mechanism of the HARTING PushPull connectors enables a higher space density while ensuring a reliable connection. With IP67 protection for cables and connectors and a PUR outer jacket, our InLine® network cable reel offers outstanding resistance to mechanical wear, pulling, bending, cracking and UV exposure.
The InLine® network cable reel supports PoE, PoE+ and PoE++ applications. The 23AWG cable consists of 4 twisted pairs of conductors made of pure copper and offers high immunity to noise and interference caused by external devices thanks to the double S/FTP shielding. In addition, our InLine® network cable reel is Fluke Channel tested and enables a transmission speed of up to 10GBase-T.
The internal locking mechanism of the HARTING PushPull connectors enables a higher space density while ensuring a reliable connection. With IP67 protection for cables and connectors and a PUR outer jacket, our InLine® network cable reel offers outstanding resistance to mechanical wear, pulling, bending, cracking and UV exposure.
The InLine® network cable reel supports PoE, PoE+ and PoE++ applications. The 23AWG cable consists of 4 twisted pairs of conductors made of pure copper and offers high immunity to noise and interference caused by external devices thanks to the double S/FTP shielding. In addition, our InLine® network cable reel is Fluke Channel tested and enables a transmission speed of up to 10GBase-T.
- Cat.6A S/FTP
- Plug type: Gold-plated RJ45 plug
- Rated voltage: 30V
- Outer diameter: 7.8 ± 0.20mm
- Mounted on lightweight, robust and durable spool
- RJ45 HARTING PushPull (V14) metal connectors with IP67 protection on both sides
- Internal locking mechanism for higher space density
- IP67 protection rating for cable and connector
- PUR outer jacket for excellent resistance to mechanical wear, pulling, bending, cracking and UV exposure
- Supports PoE, PoE+ and PoE++ applications
- The cable consists of 4 twisted copper conductor pairs with a diameter of 23AWG
- Double S/FTP shielding for high immunity to external noise and interference
- Fluke Channel Test up to 10GBase-T transmission speed
- Available in 50m & 90m
