- Installation cable with solid conductors
- Construction 2x2x0.6mm
- Cable outer diameter: 4.7mm
- Cable beige
- With meter printing on the cable
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Clean fixed installation: Solid conductors make routing in conduits, patch panels, and outlets easier.
- Reduced interference: Foil shielding (F/UTP) mitigates electromagnetic interference.
- Practical handling: 100 m from the Pullout Box can be unwound in a controlled way.
- Defined reaction to fire: Eca according to EN 50575:2014/A1:2016 for planned installations.
- Note on link lengths: For > 50 m, full Cat.5e compatibility may not be achieved with CCA conductors; use copper cable (CU) for maximum performance.
The F/UTP installation cable with PVC jacket is designed for fixed installation in structured networks. The solid conductors (AWG 24/1) facilitate termination on patch panels and outlets, the foil shielding supports a lower-interference signal path. The 100 m in the Pullout Box allow demand-based dispensing right at the point of use. Due to the CCA conductor material, the note on Cat.5e performance should be observed for longer links.
It proves itself in professional IT environments, in on-site installations and service deployments as well as in existing infrastructures of companies and public institutions when structured cabling paths are efficiently expanded or renewed.
- Connection: Without connectors
- Length: 100 m
- Category: Cat.5e
- Shielding: F/UTP (foil shielding)
- Conductor material: CCA
- Conductor construction: 4x2x AWG 24/1
- Conductor type: solid
- Jacket: PVC
- Color: Beige
- Reaction to fire: Eca according to EN 50575:2014/A1:2016
- Packaging: Pullout Box
- For installation purposes
- rigid wires
- Cat. 6 up to 250MHz
- 4x2xAWG 23/1
- Length: 50m
- PiMF, in pairs in metal foil
- S/STP, braid overall shield
- Sheath halogen-free
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Assignment according to TIA/EIA 568B2.1
- cable construction S/FTP (PiMf) 4x2xAWG26/7
- overall braided shield with paired foil shield
- Cable sheath halogen free, LSZH, conform to standards IEC 60332-1-2, IEC 60754-1, IEC 60754-2, IEC 61034
- For Gigabit and 10 Gigabit applications
- Low-interference transmission: Overall foil shielding with drain wire reduces interference.
- Clear pair assignment: 8 twisted pairs make installation easier.
- Cost-efficient cabling: CCA conductors for a balanced price-performance ratio.
- Fast length planning: Remaining-length marking saves time when cutting.
- Protection during installation: 0.5 mm PVC jacket protects the conductors in fixed cable routes.
This 16-core telephone installation cable with 8x2x0.6 mm is designed for permanent installation. The pairwise twisting facilitates assignment, the overall foil shielding with drain wire reduces interference. The 0.5 mm PVC jacket protects during pulling-in. CCA conductors support economical planning. The 25 m ring with remaining-length marking simplifies cutting and storage.
The version without plug integrates into professional IT environments, on-site installations, and existing infrastructures. Use the cable for telephone connections, connection outlets, and distribution points in companies and public institutions.
- Connection: Without plug
- Type: Telephone installation cable
- Cores: 8x2x0.6 mm (16-core)
- Conductors: CCA (copper-clad aluminum)
- Shielding: Overall foil shielding, drain wire
- Jacket: PVC, 0.5 mm
- Outer diameter: 7.2 mm
- Length: 25 m ring
- Color: Beige
- Reaction to fire: Eca according to EN 50575:2014/A1:2016
- Marking: Remaining-length marking on the cable
- Cost reduction through easy handling on the construction site without additional unwinding device
- Handy and stackable packaging, convenient to transport in the construction site vehicle
- Low weight (can also be sent by parcel service)
- Avoidance of soiling and transport damage to the cable through repackaging by means of cardboard
- Reduction of cutting costs for small quantities
- Cable for installation
- Cat. 7a installation cable up to 1200MHz
- Construction: 4x2xAWG23/1 PIMF (0.58mm²)
- Suitable up to 10 Gbit
- Full copper cores
- Impedance: 100Ohm, DC resistance: max. 93.8 Ohm/km
- Sheath halogen-free LSZH
- Sheath colour orange
- Construction: In pairs in metal foil
- Overall braided shielding
- Cable diameter approx. 7.8mm
- Installation temperature: 0 - 50°C, Operating temperature: -20°C - 60°C, Storage temperature: -20°C - 50°C
- With remaining metre indication on cable
- Fire behaviour B2ca according to EN 50575: 2014 / A1:2016
- Cost reduction through easy handling on site without additional drum tooling
- easy to carry, handy and stackable packaging to pack in construction vehicle
- Lightweight (also sendable by parcel service)
- Prevention of pollution and damage to the cable by means of cardboard packaging
- reduce the average cost for small quantities
- Cable for installation
- Cat. 7a duplex installation cable to 1200MHz
- Construction: (2x) 4x2xAWG23/1 S-FTP PiMf
- Suitable up to 10Gb
- Full copper conductors
- Impedance: 100 Ohm, DC resistance: max. 87 Ohm / km
- Halogen-free jacket LSOH
- Orange sheath
- Structure: pairs in metal foil
- Overall braid shielding
- Cable diameter about 2x 8.2mm
- Installation temperature: 0 - 50°C, operating temperature: -20°C - 60°C
- With meter-printing on cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Cladding color black
- 6--wire
- for connectorizing
- Installation cable with solid conductors
- Construction 4x2x0.6mm
- Cable outer diameter: 5.6mm
- Cable beige
- Cable packed in a box, with meter printing on the cable
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Installation cable with solid conductors
- Construction 6x2x0.6mm
- Cable outer diameter: 6.5mm
- Cable beige
- Cable packed in a box, with meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Cut to length as needed: 100 m ring enables custom-fit lengths without excess.
- Space-saving routing: Flat design makes it easier to route in narrow ducts and along edges.
- Flexible termination: 8-conductor design for custom pinouts and connector selection.
- Practical final assembly: Without connectors for an exact on-site fit.
The 8-conductor flat ribbon cable on a 100 m ring is designed for custom termination. The flat design makes routing easier, and cut-to-length supports clean, requirement-based cable runs.
In on-site installations and service deployments, runs can be quickly adapted and integrated into existing infrastructures. In professional IT environments as well as in companies and public institutions, it supports a structured, project-oriented implementation.
- Cable type: modular cable
- Form factor: flat ribbon
- Conductor count: 8-conductor
- Length: 100 m
- Color: black
- Configuration: without connectors
- Supply form: ring
- Cost reduction because of easy handling on site without additional tools for rolling up the cable
- Handy an stackable packaging
- Lightweight (can be send with standard parcel services)
- Prevention of pollution and damage because of the packaging cardboard
- Reduces average costs for small pieces of cable
- Cable for installation
- Cat 7a installation cable with up to 1200 MHz
- Architecture: 4x2xAWG23/1 PIMF
- Suitable for up to 10 GBit
- Full copper wires
- Impedance: 100Ohm DC resistance: max 87 Ohm/Km
- LDPE Cable sheath, UV resistant, making it suitable for outdoor use
- Sheath color: black
- Compliant with ISO/IEC 11801, IEC 61156-5
- Construction: pairs in metal foil
- Overall braid shielding
- Cable diameter approx. 8.2mm
- Installation temperature 0 - 50°C, operating temperature -20 - 60°C
- Printed rest-meters on the cable
- Cost reduction through easy handling on site without additional drum tooling
- easy to carry, handy and stackable packaging to pack in construction vehicle
- Lightweight (also sendable by parcel service)
- Prevention of pollution and damage to the cable by means of cardboard packaging
- reduce the average cost for small quantities
- Cable for installation
- Cat. 7a installation cable to 1200MHz
- Construction: 4x2xAWG23/1 S-FTP PiMf
- Suitable up to 10Gb
- Full copper conductors
- Impedance: 100 Ohm, DC resistance: max. 87 Ohm / km
- Halogen-free jacket LSZH
- Orange sheath
- Structure: pairs in metal foil
- Overall braid shielding
- Cable diameter about 8.2mm
- Installation temperature: 0 - 50°C, operating temperature: -20°C - 60°C
- With meter-printing on cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Cost-effective network cabling: High-quality CCA conductor material with 20% copper content offers reliable performance at an attractive price.
- Future-proof with 600 MHz performance: Ideal for structured building cabling with Cat.7 standard up to 70 m permanent link.
- PoE and PoE+ support: Suitable for modern network applications with IEEE 802.3af and 802.3at – ideal for access points, cameras and IP telephones.
- Robust shielding for EMC-critical environments: S/FTP (PiMF) with AL foil and braiding offers high interference immunity.
- Halogen-free sheath: Safety in case of fire thanks to reduced smoke emission thanks to LSZH material.
InLine® Cat.7 installation cables with S/FTP construction (PiMF) and AWG23 conductors made of copper-coated aluminium offer a powerful and economical solution for professional network projects. With a transmission frequency of up to 600 MHz and a permanent link length of up to 70 metres, the cables are ideal for structured building cabling in residential and commercial properties.
Thanks to their support for IEEE 802.3af (PoE) and 802.3at (PoE+), the cables enable power-supply devices to be operated directly via the network – without additional power cables. The double shielding consisting of aluminium foil (≥25%) and aluminium-magnesium braiding (≥30%) ensures stable and reliable signal transmission even in interference-prone environments.
The LSZH (Low Smoke Zero Halogen) sheath material used complies with CPR classification Eca and thus offers increased safety in the event of fire. The orange sheathing also ensures quick identification during installation.
The various pre-assembled lengths allow for flexible planning and economical implementation – ideal for professional applications with a focus on price-performance.
- Conductor material: copper-coated aluminium (CCA), 20% copper content
- Cores: 8 conductors (4 pairs)
- AWG: 23
- Construction: 1/0.57 mm
- Insulation diameter: 1.35 mm
- Sheath material: LSZH
- Sheath thickness: 0.55 mm ±0.05
- Outer diameter: 7.6 mm ±0.3
- Shielding: AL foil ≥25%
- Braiding: AL-MG ≥30%
- PoE support: IEEE 802.3af and 802.3at
- Standards: ISO/IEC 11801, EN 50575, IEC 60332-1-2
- CPR classification: Eca
- Modular 4-core cable
- Flat ribbon, white, 100m ring
- Patch cable, for confectioning
- flexible wires, full copper
- Cat.6 S/FTP cable
- 4x2x AWG27
- 100m in a carton box
- Overall braid shielding and PiMf - pairs in metal foil (formerly named: S-STP PiMf)
- Gigabit compatible
- PVC jacket
- Cut to exact lengths: 100 m coil enables demand-based runs without excess length.
- Fast on-site assembly: Flexible AWG 26/7 stranded conductors make connector assembly and cable routing easier.
- Less susceptibility to interference in operation: SF/UTP with foil and braid shielding reduces external interference.
- Neat routing: Black PVC jacket supports flexible, unobtrusive cable routing.
- Free connector choice: Without connectors for custom termination as required.
With this Cat.5e patch cable as a 100 m coil you create custom network lengths without unnecessary excess length. The 4x2xAWG 26/7 stranded construction is easy to route, while the SF/UTP shielding with foil and braid reduces external interference. The black PVC jacket supports neat, well-organized cable routing.
In professional IT environments, for on-site setups and in service deployments, the 100 m coil helps fit runs to requirements within existing infrastructures of companies and public institutions.
- Standard: Cat.5e
- Conductor construction: 4x2xAWG 26/7 (stranded)
- Conductor: CCA
- Shielding: SF/UTP, foil and braid shielding
- Jacket: PVC
- Color: black
- Length: 100 m
- Design: without connectors
- Create individual lengths: Without connectors for cutting and termination as required.
- Lower-interference transmission: F/UTP overall shielding reduces external interference.
- Easy handling: Stranded AWG 26 construction supports flexible installation.
- Plannable stock length: 100 m allows multiple patch cables from one box.
- Important note on CCA: Over longer distances >50 m, full Cat.5e performance may vary; for such applications, full copper is recommended.
The Cat.5e twisted pair cable with F/UTP shielding is supplied as 100 m bulk cable in a pull-out box. This lets you make patch cables in suitable lengths and expand existing cabling as required. The stranded AWG 26 construction made of CCA facilitates flexible handling during termination.
In professional IT environments, in on-site installations and in service deployments, the bulk cable delivers easy provisioning and adaptable cable routing. You also quickly create precisely fitting connections in existing infrastructures of companies and public institutions.
- Connection: Without connectors
- Length: 100 m
- Standard: Cat.5e
- Shielding: F/UTP, overall shield of metal foil
- Conductor construction: 4x2xAWG 26/7
- Conductor material: CCA
- Jacket: PVC
- Color: Gray
- Delivery form: Pull-out box
- Solid cable for installation
- S-FTP cable, Cat. 5e, 4x2xAWG 24/1, halogenfree
- full copper conductors
- braid and foil shielding
- in a pull box with EAN code
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Solid cable for installation
- SF/UTP cable, Cat. 5e, 4x2xAWG 24/1 full copper, PVC
- braid and foil shielding
- in a pullout box with EAN code
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- stranded wire, flexible
- Cat. 5e
- 4x2xAWG26 CCA
- length: 100m
- foil and braid SF/UTP shielding
- PVC material
- packed in a pull out box
- Solid cable for installation
- F/UTP cable, Cat. 5e, 4x2xAWG 24/1, PVC
- foil shielding
- in a pullout box with EAN code
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Quickly realize individual lengths: 100 m ring for precisely fitting network cables as needed.
- Shielding for low-interference connections: SF/UTP with foil and braid reduces external interference.
- Easy processing: Flexible conductors AWG 26/7 support convenient routing and termination.
- Clear identification: Red color simplifies assignment and documentation in the rack and at the workplace.
This Cat.5e cable as a 100 m ring is designed for assembling custom patch cables. The double shielding (SF/UTP) counteracts external interference, while the stranded conductor AWG 26/7 made of CCA facilitates handling during crimping, punching down, and routing. The PVC jacket is suitable for use in dry indoor areas.
For on-site installations and service work, the bulk cable format allows quick adaptation to existing infrastructures. In professional IT environments of companies and public institutions, the red color coding supports structured cabling and clear port and link documentation.
- Standard: Cat.5e
- Shielding: SF/UTP (foil + braid)
- Construction: 4x2 cores
- Conductor: CCA, AWG 26/7
- Jacket: PVC
- Length: 100 m ring
- Color: Red
- Version: Without plug
- Tailored cable lengths: 100 m ring for needs-based on-site cutting.
- Easy to work with: Flexible stranded conductors AWG 26/7 make stripping and termination easier.
- Reliable signal routing: SF/UTP with foil and braid shielding reduces external interference.
- Robust jacket quality: PVC jacket supports reliable indoor use.
- Easy structuring: Blue color facilitates labeling of cable routes.
With this Cat.5e cable without connectors, you assemble custom lengths quickly and cleanly. Flexible conductors and SF/UTP shielding support stable connections, while the PVC jacket facilitates daily use. The 100 m ring allows you to adapt cable lengths exactly to the requirement.
In professional IT environments, for on-site deployments or service assignments, you integrate the cable seamlessly into existing infrastructures of companies and public institutions and implement extensions or repairs efficiently.
- Type: Without connectors
- Standard: Cat.5e
- Shielding: SF/UTP (foil + braid)
- Conductor structure: 4x2 conductors, AWG 26/7
- Conductor material: CCA
- Jacket: PVC
- Length: 100 m
- Color: Blue
- Delivery form: Ring
