- Contact and Support
- InLine connects
- Knowledge
-
Products
- Adapter / Converter
-
Cables
- Adapter / converter cables
- Audio / video cables various
- DVI cables
- Direct Attached Cables (DAC)
- DisplayPort cables
- HDMI cables
- Internal cables
- Patch cables M12
- Patch cables RJ45
- Patch cables fiber optic
- Power cables external
- Raw material, not assembled
- SAS cables
- Sat & antenna cables
- Serial and parallel data transmission
- Telephone and WLAN cables
- USB & Lightning
- Computer cases / mobile racks
- Coolers / fans
- I/O cards / front panel / slot brackets
- Input / Output
- Installation / Maintenance
- Locks / tripods
- Mounts / accessories mobile devices
- Network infrastructure
- New Products
- Photovoltaics / Solar
- Power / Energy / Light
- Signal control
- Smart & Home
- Theme categories
- Theme Worlds
- Installation cable with solid conductors
- Construction 2x2x0.6mm
- Cable outer diameter: 4.7mm
- Cable beige
- With meter printing on the cable
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Low-interference transmission: Overall foil shielding with drain wire reduces interference.
- Clear pair assignment: 8 twisted pairs make installation easier.
- Cost-efficient cabling: CCA conductors for a balanced price-performance ratio.
- Fast length planning: Remaining-length marking saves time when cutting.
- Protection during installation: 0.5 mm PVC jacket protects the conductors in fixed cable routes.
This 16-core telephone installation cable with 8x2x0.6 mm is designed for permanent installation. The pairwise twisting facilitates assignment, the overall foil shielding with drain wire reduces interference. The 0.5 mm PVC jacket protects during pulling-in. CCA conductors support economical planning. The 25 m ring with remaining-length marking simplifies cutting and storage.
The version without plug integrates into professional IT environments, on-site installations, and existing infrastructures. Use the cable for telephone connections, connection outlets, and distribution points in companies and public institutions.
- Connection: Without plug
- Type: Telephone installation cable
- Cores: 8x2x0.6 mm (16-core)
- Conductors: CCA (copper-clad aluminum)
- Shielding: Overall foil shielding, drain wire
- Jacket: PVC, 0.5 mm
- Outer diameter: 7.2 mm
- Length: 25 m ring
- Color: Beige
- Reaction to fire: Eca according to EN 50575:2014/A1:2016
- Marking: Remaining-length marking on the cable
- Cladding color black
- 6--wire
- for connectorizing
- Installation cable with solid conductors
- Construction 4x2x0.6mm
- Cable outer diameter: 5.6mm
- Cable beige
- Cable packed in a box, with meter printing on the cable
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Installation cable with solid conductors
- Construction 6x2x0.6mm
- Cable outer diameter: 6.5mm
- Cable beige
- Cable packed in a box, with meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
- Cut to length as needed: 100 m ring enables custom-fit lengths without excess.
- Space-saving routing: Flat design makes it easier to route in narrow ducts and along edges.
- Flexible termination: 8-conductor design for custom pinouts and connector selection.
- Practical final assembly: Without connectors for an exact on-site fit.
The 8-conductor flat ribbon cable on a 100 m ring is designed for custom termination. The flat design makes routing easier, and cut-to-length supports clean, requirement-based cable runs.
In on-site installations and service deployments, runs can be quickly adapted and integrated into existing infrastructures. In professional IT environments as well as in companies and public institutions, it supports a structured, project-oriented implementation.
- Cable type: modular cable
- Form factor: flat ribbon
- Conductor count: 8-conductor
- Length: 100 m
- Color: black
- Configuration: without connectors
- Supply form: ring
- Modular 4-core cable
- Flat ribbon, white, 100m ring