- Fully mated RJ12 connectors for maximum compatibility: All six wires are connected - ideal for professional telephone, fax or modem solutions.
- Reliable signal transmission: Precisely manufactured modular plugs ensure a stable connection without signal loss.
- Plug-and-play solution: Pre-assembled with RJ12 plugs on both sides - for quick and error-free installation.
- Suitable for structured cabling: Ideal for use in IT infrastructures with modular connections.
- Universally applicable: Suitable for many telecommunications devices with 6P6C connection - even in professional environments.
The InLine® modular cable with two RJ12 plugs (6P6C) is a high-quality solution for the structured connection of telecommunications devices in professional environments. With six fully occupied wires, the cable ensures that even complex signals such as those from system telephones or fax machines are transmitted correctly. The pre-assembled connectors ensure quick and error-free installation - without any additional tools.
Thanks to its robust design and precise manufacturing, the cable is particularly suitable for use in IT rooms, network cabinets or for installing telecommunications systems. It also enables simple and reliable connection of test systems or diagnostic devices with an RJ12 port in the service and maintenance sector.
The universal fit allows the cable to be used flexibly in a wide range of applications. Whether as a spare part, extension or for new installations - the InLine® modular cable offers a professional connection solution at a high level.
- RJ12 plug (6P6C) to RJ12 plug (6P6C)
- 6-core full assignment
- Pre-assembled on both sides
- Modular design
- Compatible with telephone, fax, modem, telecommunications systems
- Flexible cable routing
- Suitable for structured cabling
- RJ12 plug to RJ12 socket 6P6C
- Standard 6-wire flat cable
- Length 2m
- RJ11 plug
- TAE-N socket
- Assignment (RJ11 -> TAE): 2-5(b2), 3-1(a), 4-2(b), 5-6(a2)
- RJ45 male to RJ45 female
- Modular connector with 8-pin body
- 8pin 1:1 wiring configuration
- Colour black
- RJ45 8P/4 male to RJ11 4P/4C male
- 4 wires
- Configuration 3-2, 4-3, 5-4, 6-5
- Spiral cable assembled with RJ10 4P4C plugs
- Assignment: 1-4, 2-3, 3-2, 4-1
- RJ45 8P/6C male to RJ12 6P/6C male
- Configuration 2-1, 3-2, 4-3, 5-4, 6-5, 7-6
- TAE N/F/N sockets to RJ11 (6P4C) plug
- RJ11 6P/4C male to RJ11 6P/4C male
- Configuration 1-1;2-2;3-3;4-4
- TAE N/F/N connection sockets to RJ 45 plugs
- Ideal for use with Cat. 5e cabling
- Wireless Lan cable
- E.g. as extension from WLAN access point to antenna
- R-SMA plug to R-SMA coupling
- 50Ohm, double shielded
- RG58
- TAE-F plug to RJ45 plug
- 2-conductor, unshielded flat cable
- Pin assignment (TAE -> RJ45): 1-4, 2-5
- Assignment deviating from the international standard
- Assignment (TAE-F to RJ11): 1(a)-5, 2(a)-2, 3(W)-4, 4(E)-3
- Connects two ISDN devices: Ideal for parallel use of ISDN telephone and ISDN modem on one connection.
- 1:1 loop-through: All contacts are fully assigned 1:1 – no signal change.
- Compact cable design: Flexible adapter with 15 cm cable length for more freedom when connecting.
- Just plug in and use: Plug-and-play without configuration – ready for immediate use.
- Only suitable for ISDN: Cannot be used as a LAN or Ethernet splitter – please note.
With the InLine ISDN splitter, two ISDN terminals can be operated in parallel via an RJ45 connection. The adapter has an RJ45 plug and two RJ45 sockets and is fully 1:1 assigned. This ensures direct transmission of all wires without terminating resistors – ideal for operating ISDN telephones, modems, or combination devices.
The 15 cm long connection cable allows the adapter to be used flexibly, even in tight installation environments. The high-quality workmanship ensures a reliable connection. Important: This product is not suitable for Ethernet or network applications and is intended exclusively for ISDN signal distribution.
- 1x RJ45 plug (8P8C)
- 2x RJ45 sockets (8P8C)
- Cable length: 15 cm
- Assignment: 1:1 fully looped through
- Without terminating resistor
- Only for ISDN applications (not suitable for LAN)
- RJ45 male to 1x TAE-N + 1xRJ11 female
- RJ45 -> TAE-N/RJ11 configuration: 3-5/2, 4-1/3, 5-2/4, 6-6/5
- TAE-F plug to RJ11 plug, 4-wire assignment
- Assignment: 1-3, 2-4, 3-5, 4-2
- R-SMA Female to U.FL Male
- AVM Fritz-Box compatible
- Cable length 0.20m
- Spiral cable assembled with RJ10 4P4C plugs
- Assignment: 1-4, 2-3, 3-2, 4-1
- Spiral cable assembled with RJ10 4P4C plugs
- Connection: 1:1
- 2x RJ45 socket
- 15cm cable
- Full assignment (8P8C)
- 1x RJ45 plug to 2x RJ45 sockets (8P8C)
- W/o terminal resistor
- 1x RJ45 male plug
- 2x RJ45 female sockets
- Without resistors
- 4pin. Assignment (3,4,5,6)
- RJ45 male to RJ45 male
- Modular connector with 8-pin body
- 4-pin 1:1 wiring configuration
- Colour black
