InLine®, aluminum fan guard with filter
InLine® fan grille, aluminium filter
- fan grille with filter function
- frame aluminium, mesh stainless steel
- mesh density: 24 wires/inch, aperture 0.8mm, wire 0.25 mm
- Meets IP40
- Washable, easy to clean
- The hole spacing corresponds to the spacing of the corresponding housing fan, diameter: 4.3 mm
InLine® Thermal Compound 0.5g with Scoop
Thermal compound, 0,5g, with scoop
- white thermal compound
- heat conductance: > 1.729W/m-K
- thermal resistance: 0.125 °C-in²/W
- operating temperature: -50°C to 240°C
- contents: 0.5g
- ingredients: silicone 50%, carbons 30%, metal-oxides 20%
- incl. scoop to spread the compound
Item no.:
33752I
InLine® Fan guard metal
Fan guard grilles prevent touching of the moving blades of fans in the housing.
- Material: metal wire, approx. 1.5 mm diameter
- Grid spacing approx. 5-6 mm
InLine®Filter + installation cartridge
The use of this filter, framed in the filter holder, provides effective protection from dirt and dust that could generate short circuits or mechanical malfunctions in the components inside a PC case.
- Removable filter
- Washable
- Support frame
InLine® IC chip Sink self adhesive cooling fins, 8 pcs.
Passive heat sink for IC chip components. Protect your components against overheating! Separate heat sinks are equipped with thermal conductance self-adhesive pads.
- Color: silver
- Dimensions (LxWxH): 14 x 14 x 6mm
- Content: 8 pcs.
Item no.:
33955I
InLine® Temperature Sensor / Probe universal 2 Pin with Cable 1m
Temperature sensor, InLine®, with cable, 1m
- e.g. for connecting to front panel
- NTC resistance
- Temperature range: -50°C up to +90°C
- Resistance at 25°C: 10KOhm
- Cable: 1m with pole connector, 2 pin
Item no.:
36219I
InLine® Retention Kit for Pentium 4 heatsink with Northwood Socket 478
This universal mounting frame ("retention module") is made of black plastic and can be mounted easily on your Pentium 4 motherboard with 478 Northwood socket. It comes with rivets which ensure stability for the CPU cooler.
Item no.:
33779
InLine® Fan Adapter Acrylic 120mm to 70/80/90mm for heat sink
Use this fan adapter to install a 120mm fan onto a heat sink which normally can only house a 70, 80 or 90mm fan. Using a fan with larger diameter has a positive effect upon noise level, as these fans require far lower rotational speeds for the same air flow volume. Fan adapter made from transparent acryl and offers excellent price-performance ratio, including several screws and washers.
Item no.:
36011
InLine® Plastic CPU Socket Retention Module for AMD K8 / AM2 / AM3 / FM1
Plastic mounting frame, retention module for base AMD K8/AM2/AM3/FM1, size: 110x61x24mm, incl. screws and backplate.
Item no.:
33779I
InLine® RAM Heat Sink self-adhesive cooling fins 4pcs.
Passive heat sink for memory elements. Protect your RAM memory against overheating! Separate heat sinks are equipped with thermal conductance pads.
- Color: light blue, blue
- Dimensions (LxWxH): 22 x 8 x 5 mm
- Amount: 4 pcs.
Item no.:
33955H
InLine® RAM Heat Sink self adhesive cooling fins 8 pcs.
Passive heat sink for memory elements. Protect your RAM memory against overheating! Separate heat sinks are equipped with thermal conductance pads.
- Color: blue, purple
- Dimensions (LxWxH): 22 x 8 x 5 mm
- Amount: 8 pcs.
Item no.:
33955G
InLine® SSD cooler, cooling fins / heat sink, suitable for M.2 SSD
Passive heat sink suitable for M.2 SSD. Protect your SSD from overheating! The heat sink is simply connected to the SSD with the supplied O-rings, the aluminium fins ensure better heat dissipation and thus in the long term damage to the electronics.
- colour: silver
- heat sink dimensions (LxWxH): 66.5 x 22 x 5mm
- Quantity: 1 piece
Item no.:
33955K
InLine® Retention Kit for Intel Socket 775 CPU
This kit consists of 2x 4 plastic parts to securely attach the cooler for Intel P4 Socket 775 processors to the mainboard.
- Intel reference product
- Mounting kit for Intel Socket 775 processors
- 4x white plastic base bracket
- 4x black plastic mounting cap
Item no.:
33699
InLine® Switch for switching Chassis Fan ON and OFF
InLine® switch for switching chassis fan on and off, with 3 pin connector and speed signal
- Opening size for switch ca. 20x14mm
- Cable length ca. 2x 25cm
Item no.:
33328Z
InLine® PC Fan Multi Power Port Adapter Molex 5.25" to x 2 Fan Power
For connecting 2 fans with 3pin mainboard connector to the power supply of 13.34cm (5.25")-drives. A LED can be connected as an addition. The back of the board is self-adhesive for easy mounting on the computer case. Dimension of the board: approx. 38x25x18mm. The tachometer signals from the fans will not be considered.
Item no.:
33008A
InLine® Multi Port Panel 2x Molex 4 Pin to 12 x 3 Pin Fan connector for 12 fans
Multi Power Port (MPP) offers connection option for up to 12 fans. Fan may be connected to 4x 12V (3pin Molex), 4x 7V (3pin Molex) and 4x 5V (3pin Molex) ports. MPP is directly connected to power supply and signals readiness via red LED.
- 4x 12V (3pin Molex) fan connectors
- 4x 7V (3pin Molex) fan connectors
- 4x 5V (3pin Molex) fan connectors
- Independent of operating system
- Dimensions: 105x45x20mm (LxWxH)
Item no.:
33008
