I/O cards, front panels & slot brackets for PCs & cases

• Two additional USB Type A ports at the rear: Conveniently connect external devices at the rear of the chassis.
• Direct motherboard connection: 2x IDC 5-pin (socket) connect the ports to internal headers.
• Clean, secure mounting: Slot bracket neatly integrates the ports at the rear.
• Simple cable routing: Round connection cable with 0.3 m length makes routing inside the chassis easier.

This slot bracket routes two internal USB 2.0 headers to the outside and provides two USB Type A ports at the rear of the chassis. The connection is made via two 5-pin IDC sockets directly to the motherboard. The 0.3 m round connection cable enables a tidy installation without additional adapters.

It proves itself in professional IT environments, in on-site installations and in service deployments when rear USB ports are needed for peripherals, dongles or temporary connections in existing infrastructures.

• External connection: 2x USB Type A ports
• Internal connection: 2x IDC 5-pin sockets
• Standard: USB 2.0
• Length: 0.3 m
• Form factor: slot bracket
• Cable type: round

• Easy retrofitting of an RS232 connection: Enables a PC to be expanded with a serial interface via the internal 10-pin motherboard header for classic COM port applications.
• Direct 1:1 pin assignment for a stable connection: Supports unaltered signal transmission without adaptation and ensures reliable communication with serial devices.
• Space-saving low-profile design: Suitable for compact enclosures and slimline systems where there is limited installation space available for expansions.
• Compatible with 9-pin Sub-D devices: Provides a standardised connection for many existing RS232 applications and allows the reuse of existing hardware.
• Flexible integration thanks to 0.6 m cable length: Supports a neat and simple installation within the chassis and facilitates the connection between the motherboard and the slot bracket.

This serial slot bracket allows for the simple retrofitting of an RS232 connection on a PC. It connects directly to the motherboard via a 10-pin female header and provides a 9-pin Sub-D connector on the slot bracket.

The 1:1 pin assignment ensures direct signal transmission without conversion. This makes the cable ideal for applications where stable and unaltered communication is required. Existing devices with a serial interface can be reused without any problems.

Thanks to its low-profile design, the slot bracket is also suitable for compact enclosures. The cable length of 0.6 m allows for flexible installation and supports neat cable routing inside the system.

The product offers a reliable solution for extending or restoring a serial connection and can be easily integrated into existing systems.

• Cable length: 0.6 m
• Connector: 9-pin Sub-D plug
• Connector: 10-pin female header (motherboard header)
• Design: Low profile
• Pin assignment: 1:1 (1-1 to 9-9)
• Pin 10: not assigned

• Direct system boot: Bootable like an IDE drive.
• Flexible storage configuration: Two slots for CF Type I/II.
• Fast modes with compatible cards: Supports DMA and Ultra DMA.
• Easy integration: 44-pin IDE connector for 6.35 cm (2.5") connectors.
• Reduced cabling effort: Power supply directly via IDE.

The internal 6.35 cm (2.5") IDE-to-CompactFlash interface integrates two CF cards as mass storage and behaves like a conventional IDE drive to the system. With compatible flash media, DMA and Ultra DMA modes are possible, allowing existing systems to operate with compact, removable storage.

It proves itself in professional IT environments, in on-site installations, and in service deployments within existing IDE infrastructures of companies and public institutions.

• Connector: 44-pin IDE connector
• Slots: 2x CompactFlash (Type I/II)
• Supports: IBM Microdrive
• Form factor: 6.35 cm (2.5")
• Power supply: via IDE
• Modes: DMA, Ultra DMA (compatible flash media required)
• Bootable: Yes
• Operating systems: Windows 2000/XP/Vista, DOS, Mac, Linux

• Space-saving installation in the low-profile slot: Use a free PCI slot for rear pass-through.
• Compatible with 9-pin Sub-D connectors: Accepts male and female versions.
• Robust mounting: SPCC steel with 0.8 mm material thickness and nickel-plated surface.
• Clean panel integration: Tidy connection routing without additional drilling on the chassis.

With this low-profile slot bracket with 9-pin Sub-D cutout, you route connections neatly to the rear of the chassis. Installation in a free PCI slot enables secure fastening of male or female 9-pin Sub-D connectors to the panel and provides reliable attachment.

Particularly practical for on-site installations and service deployments when existing infrastructures are to be expanded or interfaces relocated to the outside. In professional IT environments, companies, and public institutions, the low-profile design facilitates use in compact chassis.

• Design: Low profile slot bracket
• Cutout: 9-pin Sub-D
• Compatibility: male and female 9-pin Sub-D connectors
• Material: SPCC steel, 0.8 mm
• Finish: nickel-plated
• Mounting: use of a free PCI slot
• Type: blanking plate with Sub-D cutout

• Space-saving solution for serial connections: Two 9-pin Sub-D plugs or sockets can be conveniently attached to the slot bracket.
• Compatible with PCI slots: Simply install in a free PCI slot – suitable for desktop PCs or server enclosures.
• Robust workmanship: Made of sturdy sheet steel, the slot bracket ensures that the Sub-D connectors are held securely in place.
• Perfect for RS232 communication: Ideal for retrofitting or expanding serial interfaces such as COM ports.
• Double pack for use on both sides: Includes two brackets for flexible use – for plugs or sockets as required.

With the InLine® slot bracket, you can easily mount two 9-pin Sub-D plugs or sockets on the back of your PC or server. Use a free PCI slot to retrofit your serial interface elegantly and in a space-saving manner. The robust sheet steel construction ensures a secure hold, regardless of whether you use male or female connectors. Ideal for retro PCs, control units or industrial RS232 applications. The slot bracket also offers versatile application options for technology enthusiasts looking for smart solutions for their system – reliable, flexible and high-quality.

• Material: Sheet steel
• Mounting: 2x 9-pin Sub-D plug or socket
• Compatibility: Standard PCI slot
• Scope of delivery: 2 pieces per set

• Quick coverage of unused slots: Blanking plates for unused PCI slot openings on the case rear panel.
• Fits PCI slots: Suitable for slot openings on PC and server cases.
• Aluminum design: Made of aluminum for a clean finish.
• Stock for multiple uses: Pack of 6 for parallel use on multiple systems.

The plates close unused slot openings on the back of PC cases and servers when no expansion cards are installed. This gives you a continuous finish at the rear without open PCI slots.

For on-site installations and service deployments, the pack of 6 facilitates the quick outfitting of multiple systems in existing infrastructures of companies and public institutions as well as in professional IT environments.

• Type: Blanking/closure plate
• Application: PCI slot on the case rear panel
• Material: Aluminum
• Quantity: Pack of 6

• Four USB ports available immediately: Add 4x USB Type A via the PCIe slot.
• Fast data transfer: Up to 5 Gb/s with USB 3.2 Gen.1 for external drives and devices.
• Stable device power supply: Max. 5 V/900 mA per port with SATA power connected.
• Flexible in slim enclosures: Low-profile slot bracket included.
• High compatibility: Backward compatible with USB 2.0 and PCIe 1.0.

The PCIe interface card adds four USB Type A ports with USB 3.2 Gen.1 to your computer. This lets you connect external drives, cameras, or measuring instruments with high performance and transfer large amounts of data quickly. The internal SATA power connector provides up to 5 V/900 mA per port so that even power-hungry accessories run reliably.

Especially for upgrades in existing infrastructures, the card offers quick setup and flexible use. In professional IT environments, for on-site deployments and in service operations, workstations in companies and public institutions benefit from additional USB ports, including in small-form-factor systems with the included low-profile slot bracket.

• Connection: 4x USB Type A sockets
• Interface: PCI Express slot
• PCIe standard: Base specifications Rev. 2.0 (backward compatible with 1.0)
• USB standard: USB 3.2 Gen.1 (backward compatible with USB 2.0)
• Data rate: up to 5 Gb/s (USB 3.2 Gen.1), up to 480 Mb/s (USB 2.0)
• Power connector: internal SATA
• Output per port: max. 5 V/900 mA (when the power connector is connected)
• Slot bracket: low-profile included
• Chipset: VIA VLI VL805
• Operating systems: Windows 11, 10, 7/Vista/XP/2008 (32/64-bit)
• Scope of delivery: 4-port USB 3.2 PCIe card, manual (EN), low-profile slot bracket, driver CD

The InLine® Slot bracket with Low-Profile design is ideal for closing unused slots on the rear of PC cases or servers. They prevent dust from entering and ensure a clean rear appearance. Thanks to their Low-Profile, they can be installed in Low-Profile cases.

• Blank/closing plate
• For PCI slot Low-Profile
• Material: aluminium

• Two RS-232 interfaces via PCIe: Ideal for connecting older serial devices such as modems, measurement systems or industrial hardware.
• Full protocol support: Supports various data formats, parity types and freely configurable baud rates.
• Integrated flow control and 256-byte FIFO: Stable data transmission thanks to hardware/software control and large buffers for professional applications.
• Compatible with Windows & Linux: Supports Windows XP, Server 2003 and Linux from kernel 2.6.x – easy driver integration.
• Low-profile & full-profile compatible: Includes both slot brackets for full flexibility when installing in different types of enclosures.

With the InLine® PCIe interface card with two RS-232 ports, you can bring classic serial interfaces back into modern PC systems. Perfect for anyone who continues to rely on devices with COM ports – for example, in measurement technology, cash register solutions or industrial control systems.

The card uses the proven ASIX AX99100 chipset for stable and reliable communication. It supports a transfer speed of up to 115,200 bps, a wide range of parity types and bit formats, as well as flow control via hardware or software. A large 256-byte FIFO buffer on each channel prevents data loss even under high loads.

The low-profile bezel supplied makes the card suitable not only for standard housings but also for compact form factors. Thanks to support for current Windows and Linux systems, installation is extremely easy.

Whether for retro technology, machine connection or diagnostic hardware, this interface card is the ideal solution for anyone who continues to rely on RS-232.

• Interface: PCIe 2.0 x1
• Connections: 2x RS-232 (9-pin Sub-D)
• Chipset: ASIX AX99100
• Baud rate: up to 115,200 bps
• FIFO: 256 bytes send/receive
• Parity: even, odd, none, space, mark
• Data formats: 5–9 bits
• Flow control: hardware & software
• Supports IrDA mode
• Compatible with Windows XP+, Linux 2.6.x and higher
• Slot covers: standard & low-profile included

• Two rear USB-A ports: Use an internal USB 3.2 Gen.1 connection as external ports.
• Quick expansion without modifications: Insert into a free slot and connect to the 19-pin motherboard header.
• Clean cable management: Cable length approx. 0.5 m for flexible routing inside the case.
• Reliable connectivity: Direct connection to the motherboard for stable USB connections.

The slot bracket routes the internal USB 3.2 Gen.1 motherboard connector to the outside and provides two USB-A ports on the rear of the case. This allows you to use additional USB ports when front ports are occupied or more ports are needed. Setup is straightforward: Insert the slot bracket and connect the 19-pin motherboard header.

In professional IT environments and in on-site deployments, it complements existing systems with minimal effort and improves the accessibility of USB ports. It also simplifies temporary device connections in service deployments and in companies and public institutions, providing a tidy access point at the rear of the case.

• External connection: 2x USB-A ports
• Internal connection: 19-pin motherboard header
• Standard: USB 3.2 Gen.1
• Length: approx. 0.5 m

• Secure mounting on the chassis: Securely mount 9-pin Sub-D plugs or sockets via a free PCI slot.
• Clean pass-through without drilling: Use the slot area instead of your own cutouts in the back panel.
• Robust, lightweight design: Aluminum sheet metal provides stability in continuous operation.
• Equip multiple systems quickly: Benefit from the 4-pack for parallel installations or replacements.

The slot bracket with Sub-D cutout enables the mounting of 9-pin Sub-D connectors (plug or socket) on the rear of a PC or server chassis. It uses a free PCI slot, eliminates additional drilling, and provides a neat, easily accessible pass-through for Sub-D connections.

The set proves itself in professional IT environments, in on-site installations and in service deployments, when connections need to be routed to the outside in a structured manner on existing infrastructures. In companies and public institutions it supports uniform outfitting and facilitates service work.

• Design: Slot bracket with Sub-D cutout
• Compatibility: 9-pin Sub-D connectors (plug and socket)
• Mounting: Attachment in a free PCI slot
• Material: Aluminum
• Scope of delivery: 4-pack

• Four ports within easy reach: Connect USB devices such as flash drives and external drives directly at the front.
• Neat 3.5 inch installation: Fits into the front bay and integrates into the case in a space-saving way.
• High transfer rate: Up to 5 Gb/s for fast data transfers.
• Simple internal connection: 19-pin USB 3.0 header and SATA power connector make installation easier.
• Backward compatible: Also works with USB 2.0 and USB 1.1.

The front panel adds four USB 3.0 ports to the front of desktop cases. This lets you connect storage media, adapters, and other peripherals quickly without having to access the rear ports. Installation in the 3.5 inch front bay and the internal connection via the 19-pin USB 3.0 header and the SATA power connector are straightforward.

In professional IT environments, front access accelerates temporary connections, data transfers, and tests directly at the workstation. In on-site installations and service deployments, it simplifies handling of USB devices in existing infrastructures of companies and public institutions.

• Installation: 3.5 inch front bay (8.89 cm)
• External ports: 4x USB Type-A ports
• Internal connection: 19-pin USB 3.0 motherboard header
• Power: SATA power connector
• Data rate: up to 5 Gb/s (USB 3.0)
• Backward compatibility: USB 2.0, USB 1.1
• Color: Black

• Connect external storage without re-cabling: Routes the internal SATA port to an external eSATA socket.
• High transfer performance up to 6 Gb/s: Shielded cable supports fast data transfers.
• Secure fit at the controller: SATA plug with locking latch prevents unintentional loosening.
• Neat rear connection: eSATA socket in the slot bracket provides a clean panel layout.

The slot bracket routes an internal SATA port from the motherboard or an interface card to an external eSATA socket. This allows you to connect external SATA devices directly to the controller. The cable shielding supports low-interference signal quality and enables data rates up to 6 Gb/s.

In professional IT environments, this solution facilitates temporary or permanent connection of drives for backups, migrations, and tests. It fits on-site installations, supports service deployments, and integrates easily into existing infrastructures of companies and public institutions.

• Connection: SATA plug 7-pin to eSATA socket (slot bracket)
• Length: approx. 0.5 m
• Data rate: up to 6 Gb/s
• Shielding: shielded
• Locking: locking latch on SATA plug

• Extends USB ports to the outside: Converts a USB header on the motherboard into two external USB 2.0 ports on the rear panel.
• Easy installation: Slot bracket is mounted in the case and connected to the motherboard via a 10-pin IDC connector – no driver required.
• Space-saving cable routing: The 0.35 m long round cable can be laid flexibly in the case – ideal for compact systems.
• Sturdy design for long-term use: Metal design with permanently mounted USB ports – reliable even with frequent use.
• Perfect for upgrades and custom-built PCs: Suitable for desktop PCs, workstations or industrial applications – maximum compatibility.

The InLine USB 2.0 slot bracket offers a practical solution for providing two external USB ports directly via the internal USB header of a motherboard. The two USB Type A sockets are permanently mounted on a robust slot bracket and can be conveniently used at the rear of the PC case. Internally, the connection is made via a round cable with an IDC 10-pin post connector.

With a cable length of approx. 0.35 m, the cable can be laid flexibly – even in tight cases. Installation is tool-free and requires no drivers. Simply connect the IDC plug to the USB header on the motherboard, screw on the slot bracket, and you're done.

Whether for a simple system upgrade, to repair defective connections or for individual PC projects – the slot bracket impresses with its reliability and universal applicability. It is particularly practical for hobbyists, IT professionals and anyone who wants to make hidden motherboard ports more accessible.

Thanks to its solid metal construction, the product is also suitable for environments with frequent use. Compatible with most standard motherboards and cases, it is the ideal choice for anyone who wants to easily add additional USB ports.

• USB version: USB 2.0
• Internal connection: 10-pin IDC header connector
• External connection: 2x USB Type A socket
• Cable length: approx. 0.35 m

• Supports an NVMe SSD (M.2 Key M) for compact high-performance storage solutions
• PCIe 3.0 x1 interface with up to 1 Gb/s effective bandwidth
• Automatic lane detection on boot for easy system integration
• LED indicator for displaying read and write activities
• No additional driver required – native support by Windows and Linux

The InLine® PCI Express card expands your system with an internal NVMe M.2 slot, which enables the connection of an M.2 SSD (Key M). Thanks to the PCIe 3.0 x1 interface with up to 1 Gb/s transfer rate, the card is ideal for systems that require additional fast storage space.

The automatic lane detection during boot ensures optimal integration into the system. The M.2 SSD is powered directly via the PCIe bus (3.3 V), and an LED indicator provides information about the current operating and activity status.

Technical data:

• Bus type & PCIe: PCIe 3.0 x1 (operational in x1, x4, x8 and x16 slots)
• Connection – interfaces:
  - 1 x M.2 slot (Key M) for NVMe SSDs
  - Supported module sizes: 2230, 2242, 2260, 2280
• Dimension: 95 mm x 52 mm (PCIe board)
• Data rate: Maximum approx. 1 Gb/s

Operating conditions:

• Operating temperature: -40 °C to +85 °C

Features:

• Automatic detection of the lane configuration during booting
• Onboard LED indicator (1x read/write activity LED)
• The M.2 NVMe SSD draws its power supply directly from the PCIe bus (3.3 V)
• No additional driver required

System requirements:
Hardware:

• PC with one free PCIe slot (x1, x4, x8 or x16)
• Motherboard that supports PCIe 3.0 or higher

Operating system support:

• Windows: 11, 10, 8, 8.1
• Windows Server: 2012 R2
• Linux: Native support (Fedora, SUSE, Ubuntu, Red Hat)

Scope of delivery:

• 1 x InLine® PCI Express card to 1x internal NVMe M.2
• 1 x low-profile slot bracket
• 1 x hand screwdriver
• 2 x screws
• 1 x heat conduction pad
• 1 x instruction manual (German/English)

• Two serial ports ready to use: Add two 9-pin ports via PCI for existing devices.
• Fast setup without manual resource selection: IRQ and I/O address are selected automatically.
• Stable transmission even under load: 16C550-compatible UARTs and 256 byte FIFO deliver up to 115.2 kb/s.
• Smooth multi-card operation: PCI IRQ sharing enables parallel use of additional interface cards.
• Flexible in use: Hardware and software flow control and 5- to 9-bit formats support different devices.

The PCI interface card adds two 9-pin serial ports to PCs and reliably integrates serial modems, IR receivers, PDA cables, mobile phone data cables, or ISDN systems. Automatic resource allocation speeds up installation, while 16C550-compatible UARTs with 256 byte FIFO enable stable data flows up to 115.2 kb/s.

In professional IT environments, for on-site installations, in service deployments, and in existing infrastructures of companies and public institutions, the card facilitates continued operation of serial peripherals and reduces effort for expansions without a system change.

• Ports: 2x 9-pin serial
• Bus: PCI 32 bit
• Standard: PCI 2.3
• Power management: PCI power management
• Chipset: MCS9865
• UART: 16C550 compatible
• FIFO: 256 byte
• Data transfer rate: up to 115.2 kb/s
• Flow control: hardware and software
• Serial formats: 5-, 6-, 7-, 8-, 9-bit
• Operating systems: Windows 2000, Windows 2003 Server 32/64-bit, Windows XP 32/64-bit, Windows Vista 32/64-bit, Linux kernel from 2.6.14
• PCI IRQ sharing: supported
• Resources: IRQ and I/O address automatically selected

• Supports an NVMe SSD (M.2 Key M) for fast memory expansion
• PCIe 3.0 x4 interface with a maximum bandwidth of up to 32 Gb/s
• Automatic lane detection on boot for easy system integration
• Onboard LED indicator for displaying read and write activities
• No additional drivers required – ready for immediate use

The InLine® PCI Express card enables the operation of a NVMe SSD (M.2 Key M) via a PCIe 3.0 x4 interface with up to 32 Gb/s bandwidth, enabling fast boot times and optimized data transfers.

Thanks to automatic lane detection during booting, the card is easily integrated into the system. The power supply of the NVMe SSD is provided directly via the PCIe bus (3.3 V). In addition, an LED indicator facilitates error diagnosis and shows the operating status of the SSD.

Technical data:

• Bus type & PCIe: PCIe 3.0 x4 lane (maximum bandwidth up to 32 Gb/s)
• Connection – interfaces:
  • 1 x M.2 slot (Key M) for NVMe SSDs
  • Compatible module sizes: 2230, 2242, 2260, 2280
• Data rate: Each port supports transfer rates of up to 4 Gb/s
• Dimensions: 95 mm x 52 mm (PCIe board)

Operating conditions:

• Operating temperature: -40 °C to +85 °C

Functions:

• Automatic detection of the lane configuration at boot
• Onboard LED indicator to display the read/write activity
• NVMe SSD receives its power supply directly via the PCIe bus (3.3 V)
• No additional driver required

System requirements: Hardware:

• PC with a free PCIe slot (x4, x8 or x16 – the card is compatible)
• Motherboard with support for PCIe 3.0 or higher

Operating system support:

• Windows: 11, 10, 8.1, 8, 7
• Windows Server: 2012 R2
• Linux: from kernel 2.6

Scope of delivery:

• 1 x InLine® PCI Express card to 1x internal NVMe M.2
• 1 x low-profile slot bracket
• 1 x hand screwdriver
• 2 x screws
• 1 x heat conduction pad
• 1 x instruction manual (German/English

• SCSI port routed to the outside: 68-pin mini Sub-D socket on the slot bracket for external devices.
• Direct connection inside the chassis: 68-pin mini Sub-D socket inside for connection to the internal SCSI cable.
• Secure plug-in connection: External screw connection prevents unintentional loosening.
• Compatible with high transfer rates: Suitable for Ultra320 as well as U160/U80.
• Clear installation guideline: Connection at the last pin header connector of the internal ribbon or round cable.

The slot bracket adapter board routes an internal SCSI III U320 interface to the outside. Inside and outside, 68-pin mini Sub-D sockets are available; the external screw connection secures the connection and enables reliable connection of external SCSI peripherals.

It proves itself in professional IT environments, in on-site installations, in service deployments, and in existing infrastructures of companies and public institutions when internal SCSI connections need to be routed cleanly to the outside.

• Standard: SCSI III U320
• External connection: 68-pin mini Sub-D socket, screw connection
• Internal connection: 68-pin mini Sub-D socket
• Form factor: slot bracket, adapter board
• Compatibility: Ultra320, U160, U80
• Note: Connection only at the last pin header connector of the internal ribbon or round cable

• Dual Gigabit Ethernet: Two RJ45 ports with 10/100/1000 Mb/s each enable parallel connections for maximum flexibility
• High system compatibility: PCIe x1 interface and supplied low-profile slot bracket for standard and compact housings
• Optimised network performance: Support for jumbo frames (up to 9K), VLAN tagging (802.1Q) and flow control (802.3x)
• Energy-efficient data transmission: Supports IEEE 802.3az-2010 (Energy Efficient Ethernet) for lower power consumption
• Reliable Realtek chipset: Combination of RTL8111 and ASM1182e for stable performance in professional environments

The InLine® Dual Gigabit network card with two RJ45 ports is the ideal solution for professional server, workstation and AV environments where a stable, redundant or separate network connection is required. Thanks to the PCIe x1 interface and the supplied low-profile slot bracket, it can be flexibly integrated into a wide variety of housing types.

The card provides a reliable 10/100/1000 Mb/s Ethernet connection via both ports and supports modern network technologies such as IEEE 802.1Q VLAN, Jumbo Frames up to 9K and Flow Control according to 802.3x. In addition, the Energy Efficient Ethernet (EEE) function (802.3az) improves energy consumption during operation – ideal for continuous use in the company.

The integrated Realtek RTL8111 chipset in combination with the ASM1182e controller ensures stable and high-performance data transmission - even in demanding network scenarios. All common operating systems are supported, including Windows, Linux, FreeBSD and virtualisation platforms such as VMware ESXi.

Technical data:

• Bus type: PCIe v1.1 (2.5 GT/s) 1-lane
• Connection: 2 x RJ45 (copper)
• Data rate: 10/100/1000 Mb/s (Gigabit Ethernet)

Maximum cable length:

• 10BASE-T: Category 3 or higher (up to 100 m)
• 100BASE-TX: Category-5 or higher (up to 100 m)
• 1000BASE-T: Category 5e or higher (up to 100 m)

• Chip set: Realtek RTL8111 + ASM1182e
• Supported protocols: IPv4, IPv6
• Dimensions: 79 mm x 60 mm (PCIe board)

Network & protocol support

Supported IEEE standards:

• IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.3ab (Gigabit Ethernet)
• IEEE 802.3x (Flow Control), IEEE 802.1Q (VLAN)
• IEEE 802.3az-2010(EEE) Energy Efficient Ethernet

Features:

• Auto-negotiation (10/100/1000 Mb/s)
• MDI/MDI-X (automatic crossover detection)
• Receive-Side Scaling (RSS)
• Support for jumbo frames (up to 9K)
• UDP/TCP & IP checksum offloading

Operating system support

• Windows: 11, 10, 8, 7
• Windows Server: 2008 R2, 2016, 2019, 2021
• Linux: from kernel version 2.6.30
• Other: FreeBSD, virtualisation environments (e.g. VMware ESXi)

Environmental conditions:

• Operating temperature: 0 °C to 55 °C
• Storage temperature: -40 °C to 70 °C
• Maximum humidity: 90 %

Scope of delivery:

• 1x InLine® Dual Gigabit network card, 2x RJ45 1Gb/s
• 1x low-profile slot bracket
• 1x driver CD
• 1x operating instructions (German/English)

• Internal interface routed to the outside: Brings the 9-pin Sub-D to the slot bracket so you can conveniently connect serial devices.
• Easy retrofit without soldering: Plug the 10-pin female header directly onto the mainboard header.
• Low-error connection thanks to defined pinout: The clear pin assignment helps with correct wiring.
• Flexible placement in the case: Approx. 25 cm of cable slack makes installation easier.

With this slot bracket you route the serial interface of your mainboard to the outside and create a full 9-pin Sub-D connector on the back of the case. The 10-pin female header is plugged onto the internal header without additional tools; the clear pin assignment supports a secure connection so that you can reliably connect serial devices.

In professional IT environments and on-site installations, the solution provides fast, clean access to serial ports, for example for configuration, service tasks, or operating existing peripherals. It also facilitates integration without rewiring in established infrastructures of companies and public institutions.

• Connection: 9-pin Sub-D plug to 10-pin female header
• Length: approx. 25 cm
• Pinout: Serial -> female header: 1-1, 6-2, 2-3, 7-4, 3-5, 8-6, 4-7, 9-8, 5-9
• Pin 10: not connected on female header
• Form factor: slot bracket
• Interface: serial