- Blog
- Contact
- InLine connects
- Knowledge
-
Products
- Adapter / Converter
- Cables
- Computer cases / mobile racks
- Coolers / fans
- I/O cards / front panel / slot brackets
- Input / Output
- Installation / Maintenance
- Locks / tripods
- Mounts / accessories mobile devices
- Network infrastructure
- New Products
- Photovoltaics / Solar
- Power / Energy / Light
- Signal control
- Smart Home
- Theme Worlds
Abv:
- 2 x Compact Flash slot
- IDE 44pin male
- Power supply via IDE
- Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes.
- Supports CF-Card type I/II and IBM Microdrive
- Bootable
- Windows 2000/XP/Vista, DOS, Mac, Linux
Abv:
We therefore strongly advise against using this website!
Complies with PCI Express Base Specification Revision 2.0Complies with Universal Serial Bus 3.2 specification Revision 1.0Backward compatible to USB 2.0 and PCI-Express 1.0Supports the following data transfer rate: USB 2.0 mode up to 480 Mb/s, USB 3.2 Gen.1 mode up to 5 Gb/s (USB 3.0)Max. 5V/900mA power output to each USB 3.0 Port (with PSU connected)internal SATA power connectorVIA VLI VL805Supports Windows 11/10/7/Vista/XP 32/64-bit, Server 2008 32/64-bitWorking temperature: 0-70°CPackage Contents: USB 3.2 PCI-Express Card, User Manual, Driver CD
Abv:
- Einfache Installation, IRQ und E/A Adresse werden automatisch gewählt
- Unterstützt PCI-IRQ Sharing für Benutzung weiterer Schnittstellenkarten
- 32bit PCI Bus, PCI Spezifikationen 2.3 und PCI Power-Management
- Für Windows 2000, 2003 Server 32/64-bit, XP 32/64-bit, Vista 32/64-bit, Linux Kernel ab 2.6.14
- Integrierte 16C550 kompatible UARTs
- 256 Byte FIFO Speicher
- Datentransferrate bis zu 115,2Kb/s
- Unterstützt Hard- und Software Flusskontrolle, sowie das 5,6,7,8,9-bit serielle Format
- Unterstützt Geräte wie serielle Modems, IR-Empfänger, PDA-Kabel, Handy-Datenkabel, ISDN Anlagen, etc.
- MCS9865 Chip
Abv:
- Complies with PCI-Express Revision 2.1
- Supports standard and low profile chassis
- 10/100/1000 Mb/s and 2.5 Gb/s data rate auto negotiation operation
- Based on the Realtek RTL8125B chipset
- Fully compliant with IEEE 802.3, 802.3u, 802.3ab
- Supports full duplex flow control (IEEE 802.3x)
- Supports IEEE 802.1P Layer 2 Priority Encoding
- Supports IEEE 802.1Q VLAN tagging
- Crossover Detection and Auto Correction operation
- Supports jumbo frame to 16 KB
- Supports RealWoW technology that enables remote wake-up of a sleeping PC through the internet
- Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
- Supports Windows 11 /10 / 8.1 / 8 / 7 32/64-bit, Linux
- Package content: PCI-E 2.5G Ethernet controller card, low profile bracket, drivers CD, manual
Abv:
Abv:
- Compliant with PCI Express Base Specification Revision 1.1
- Compliant with PCI Express to PCI/PCI-X Bridge Specification Revision 1.0
- Compliant with PCI Local Bus Specification Revision 3.0
- PCI Express x1 link with 2.5Gb/s data rate
- 3.3V PCI signaling with 5V I/O tolerance
- System Requirement: PC Computer with one free PCI-Express x1, x4, x8 and x16 Slot
- Package Content: PCI-Express to PCI Adapter x 1, User's Manual x 1
Abv:
We therefore strongly advise against using this website!
The 4-Port PCI-Express SuperSpeed USB 3.0 Card (USB 3.1 Gen.1) adds 2 USB 3.0 Type-A external ports and 2 internal ports to any PCI-Express-enabled computer system. With USB 3.0, you can achieve a data rate of up to 5Gb/s while being backward compatible with existing 480 Mb/s USB 2.0 devices.
- Complies with PCI Express Base Specification Revision 2.0
- Supports PCI Express x1 Lane interface with up to 5Gb/s throughput.
- Complies with Universal Serial Bus 3.0 Revision 1.0 specification.
- Backward compatible to USB 2.0 and PCI-Express 1.0
- Complies with eXtensible Host Controller Interface (xHCI) specification Revision 1.0
- Supports the following data transfer rates: USB 3.0 mode up to 5 Gb/s, USB 2.0 mode up to 480 Mb/s
- Supports Bulk Only Transfer (BOT) mode and USB Attached SCSI Protocol (UASP) mode.
- Max. 5V/900mA power output on each USB 3.0 port (with power supply connected)
- Supports 3 external and 1 internal USB 3.0 ports
- Fully Plug and Play compatible
- Supports standard and low-profile computer enclosures
- System requirements: Computer with one available PCI Express x1 slot, Windows 10 / 8.x / 7 / Vista / XP 32-/64-Bit
- VIA VL805 Chipset
- USB 3.0 PCI-Express card
- user manual
- driver CD
- Low-Profile slot bracket
Abv:
We therefore strongly advise against using this website!
This InLine® Gigabit Ethernet PCI-Express card is a powerful 10/100/1000 BASE-T Ethernet LAN controller that is perfectly suited for home and office use. It provides a cost-effective solution for connecting to a high-speed network with a data transfer rate of up to 1000 Mb/s over a copper wire network, and can be used with any Cat.6 or Cat.5 cabling.
- Complies with PCI-Express Revision 1.1
- Supports standard and low profile chassis
- 1-Lane (x1) PCI-Express with transfer rate 2.5Gb/s full duplex channel
- A high-performance 1000BASE-T Ethernet controller card
- Backward compatible to 10/100BASE-TX networks
- 10/100/1000Mb/s Data rate automatic negotiation
- Compatible with existing CAT-5 UTP cabling
- Fully IEEE 802.3, 802.3u, 802.3u, 802.3ab compatible
- Supports full duplex flow control (IEEE 802.3x)
- Supports IEEE 802.1P Layer 2 priority encoding
- Supports IEEE 802.1Q VLAN tagging
- Crossover detection and auto-correction operation
- Fully Plug and Play
- Ideal for home and office use
- Supports Microsoft Windows 10 / 8.x / 7 / Vista / Server 2008/2003 / XP (32/64-bit), Linux 4.10.x, Mac OSX 10.10 or higher
- InLine® Dual Gigabit Network Interface Card
- PCI Express
- 1x driver CD
- user manual
- 1x low-profile slot bracket
Abv:
- Fully compliant with PCI-Express Base Specification Revision 1.1
- Single-Lane (x1) PCI-Express with throughput up to 2.5Gb/s
- Supports Re-map function for legacy ports
- Supports Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit, Windows 7 32/64-bit, Windows 8, Windows 10, Linux, Mac OS/X 10..5, and DOS 6.22
- Parallel Port Interface 25pin DB female
- IEEE1284 compatible parallel port
- Supports SPP, PS2, EPP & ECP mode
- Moschip MCS9900CV-AA
Abv:
Features / Specifications
- Chipset ASIX AX99100
- Complies with PCI Express V2.0
- Compliant with PCI Power Management 1.2
- Supports standard and low-profile housings
- Supports hardware, software flow control
- Supports 5,6,7,8 and 9-bit Serial format
- Supports even, odd, none, space and mark parity
- Supports Custom baud rate by internal PLL
- Supports on chip 256 Byte depth FIFOs in transmit, receive path of each serial port
- Supports remote wakeup and power management features
- Supports slow IrDA mode(up to 115200bps) on all serial ports
- Supports Microsoft Windows XP or newer, Linux kernel 2.6.x or newer
Abv:
We therefore strongly advise against using this website!
- Fully compliant with PCI-Express Base Specification Revision 1.1
- Single-Lane (x1) PCI-Express with throughput up to 2.5Gb/s
- Supports Re-map function for legacy ports
- Supports DOS, Windows 8 / 7 / Vista / XP / 2000 / Server 2003-2008 (all 32/64-bit), Linux & Mac OS/X 10.5 operating system
- Serial Port (RS232) interface, compatible with industrial standard 16C450/16C550 UART
- On chip 256-byte depth FIFO in transmit, receive path of each port
- Transfer data rates up to 250Kb/s on each port
- Supports hardware and software flow control
- Supports 5-, 6-, 7-, 8- bit serial format
- Supports even, odd, none, space & mark parity
- Supports 1 or 2 Stop bit operation
- Package Contents: PCI-Express I/O card, User manual, Driver-CD
- Chipset: Moschip MCS9922 CV
Abv:
Features / Specifications
- Chipset Realtek RTL8111H
- Complies with PCI Express 1.1
- Embedded OTP memory
- Supports hardware ECC (Error Correction Code) function
- Supports hardware CRC (Cyclic Redundancy Check) function
- Transmit/Receive on-chip buffer support
- Supports PCI MSI (Message Signaled Interrupt) and MSI-X
- Backwards compatible with 10/100BASE-TX networks
- 10 / 100 / 1000 Mb/s data rate
- Compatible with existing CAT-5e UTP cabling or higher
- Fully compliant with IEEE 802.3, 802.3u, 802.3ab
- Supports full duplex flow control (IEEE 802.3x)
- Supports IEEE 802.1Q VLAN tagging
- Supports IEEE 802.3az-2010 (energy efficient ethernet, EEE)
- Supports Wake on LAN (WoL) and "RealWoW" (remote wake-up)
- Supports 9K jumbo frames
- Support transfer buffer 128K Bytes and receive buffer 512K Bytes
- Supports quad core Receive-Side Scaling (RSS)
- Supports Protocol Offload (ARP&NS)
- Crossover detection and auto-correction
- Ideal for home and office use
- Supports Microsoft Windows XP or newer, Server 2003 or newer, Linux kernel 2.6.x or newer, macOS X 10.4 or newer
Abv:
- Powerful 10/100/1000BASE-T network card with Realtek RTL8169SC chipset
- Supports 1 Gb/s data transfer rate over existing CAT.5e or higher copper cabling
- Compatible with PCI V2.2 (32/64-bit, 33/66 MHz) slots
- Supports Wake on LAN, VLAN tagging and ACPI power management
- Broad driver support for Windows, Linux and macOS
The InLine® Gigabit PCI network card offers a powerful and cost-effective solution for connecting to wired networks in the home and office. With a maximum data rate of 1 Gb/s, it is ideal for fast file transfers, media streaming or reliable Internet connections.Thanks to its Realtek RTL8169SC chipset, the card guarantees high compatibility and stability. It can be easily integrated into systems with PCI V2.2 slots (32/64-bit, 33/66 MHz). The network card supports modern network functions such as full-duplex flow control, IEEE 802.1Q VLAN tagging and Wake on LAN (WoL). Crossover detection and auto-correction mode are also part of the range of functions.With support for current operating systems such as Windows, Linux and macOS, the network card is versatile. An optional boot ROM is also supported, making it suitable for special network requirements.
Technical specifications:
- Chip set: Realtek RTL8169SC
- Interface: PCI V2.2 (32/64-bit, 33/66 MHz)
- Transmission rate: 10 / 100 / 1000 Mb/s
- Compatible cabling: CAT.5e or higher
- Network standards: IEEE 802.3, 802.3u, 802.3ab
- Supports: Full-duplex flow control, VLAN tagging, Wake on LAN (WoL), ACPI, Boot ROM (optional)
- Crossover detection and auto-correction
- Compatible operating systems: Windows 98SE or newer, Server 2003 or newer, Linux kernel ≥ 2.4, macOS X 10.4 or newer
Abv:
Features / Specifications
- Chipset VIA VL805+VL812
- Corresponds to PCI Express V2.0
- External connections: 7x USB-A 3.2 Gen.1
- Internal connections: 1x SATA power connector, 15-pin
- Supports USB data transfer rates of up to 5 Gb/s, 480 Mb/s, 12 Mb/s, 1.5 Mb/s (backwards compatible)
- Supports Microsoft Windows XP or newer, Server 2008 or newer, Linux Kernel 2.6.x or newer
Abv:
Features / Specifications
- Chipset Marvell 88SE9215
- Complies with PCI Express V2.0
- PCI Express x1 interface and compatible with PCI Express x1,X4 ,X8 and X16 slots
- Compliant with Serial ATA Specification 3.0
- Supports data transfer rate of 6Gb/s, 3Gb/s, 1.5Gb/s
- Supports hot plug and hot swap
- Supports native command queue (NCQ)
- Supports port multiplier FIS based switching or command based switching
- Compatible with SATA 6G,3G and 1.5G hard drives
- Supports Microsoft Windows XP or newer, Server 2003 or newer, Linux kernel 2.6.x or newer
Abv:
Features / Specifications
- Chipset Realtek RTL8125B
- Complies with PCI Express revision V2.1
- 2-Lane PCI Express bus connecting with up to 10Gbps bus width
- PCI Express interface: x4
- Supports 1-Lane 2.5/5 Gb/s PCI Express Bus
- Supports 2.5G and 1G Lite mode
- Auto-Negotiation with Extended Next Page capability (XNP)
- Supports pair swap/polarity/skew correction
- Supports hardware ECC (Error correction code) function
- Supports hardware CRC (Cyclic Redundancy Check) function
- Supports PCI MSI (Message Signaled Interrupt) and MSI-X
- Transmit/Receive on-chip buffer support
- Supports ECMA-393 ProxZzzy Standard for sleeping hosts
- Supports Wake-On-LAN and ‘RealWow!’ Technology (remote wake-up)
- Supports IEEE1588v1, IEEE1588v2, IEEE80.2AS time synchronization
- Supports IEEE802.1Qav credit-based shaper algorithm
- Supports IEEE802.1P Layer 2 priority encoding
- Supports IEEE802.1ad Double VLAN
- Supports IEEE802.3az (Energy Efficient Ethernet, EEE)
- Supports IEEE802.3bz (2.5GBase-T)
- Supports jumbo frames up to 16KB
- Supports Virtual Machine Queue(VMQ)
- Supports quad core Receive –Side Scaling(RSS)
- Supports Protocol Offload (ARP&NS)
- Backwards compatible with 10/100BASE-TX networks
- 10 / 100 / 1000 / 2500 Mb/s data rate
- Compatible with existing CAT-5e UTP cabling or higher
- Fully compliant with IEEE 802.3, 802.3u, 802.3ab
- Supports full duplex flow control (IEEE 802.3x)
- Supports IEEE 802.1Q VLAN tagging
- Crossover detection and auto-correction mode
- Supports Microsoft Windows Vista or newer, Server 2008 or newer, Linux Kernel 2.4.x or newer
Abv:
- Complies with PCI-Express Revision 2.1
- Supports standard and low profile chassis
- 10/100/1000Mb/s and 2.5Gb/s data rate auto negotiation operation
- Based on the Realtek RTL8125B chipset
- Fully compliant with IEEE 802.3, 802.3u, 802.3ab
- Supports full duplex flow control (IEEE 802.3x)
- Supports IEEE 802.1P Layer 2 Priority Encoding
- Supports IEEE 802.1Q VLAN tagging
- Crossover Detection and Auto Correction operation
- Supports jumbo frame to 16 KB
- Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
- Supports Windows 11 /10 / 8.1 / 8 / 7 32/64-bit, Linux
- Package contents: PCI-E Dual 2.5G Ethernet Card, low-profile bracket, driver CD, manual
Abv:
Features / Specifications
- Chip set VIA VL805
- Compliant with PCI Express V2.0
- Single-lane (x1) PCI Express throughput rates up to 5 Gb/s
- Compliant with Universal Serial Bus 3.x specification revision 1.0
- Compliant with Universal Serial Bus 2.0 specifications
- Supports USB-Attached SCSI Protocol (UASP)
- Compliant with eXtensible Host Controller Interface specification revision 1.0
- Supports legacy USB function, four downstream ports support super-speed, high-speed, full-speed and low-speed
- 2x external USB-A 3.2 Gen.1 ports, 1x internal 19-pin USB 3.2 Gen.1 combo port (cable with slot bracket for two additional external USB-A ports included)
- Supports Microsoft Windows XP or newer, Server 2008 R2 or newer, Linux Kernel 2.6.x or newer
Abv:
We therefore strongly advise against using this website!
InLine® PCI-Express RS232 Serial Controller Card (1-Port)
- Complies with PCI-Express basic specification (revision 1.1)
- Single-lane (1x) PCI-Express with data rate of up to 2.5 Gb/s
- Several cards possible in a PC
- Supported operating system: Windows 2000, XP 32/64 bit, Server 2003, Vista 32/64 bit, Windows 7, Linux, Mac OS and Dos
- Serial (RS-232) interface
- Compatible with the industry standard 16C450 / 16C550 UART
- On-chip 256 byte deep FIFO transmit / receive buffer for each port
- Data transfer rates up to 250 Kb/s on each port (Special version can support up to 1 Mbit/s)
- Supports hardware and software flow control
- Supports 5,6,7 and 8-bit serial format
- Supports even, odd, none, space and mark parity
- Supports 1 or 2 stopbit operation
- Chipset: Moschip MCS9922
Abv:
We therefore strongly advise against using this website!
Mini-PCIe 2.0 card with 2x SATA 6Gb/s connector (L-shape) with RAID function (0,1,SPAN)
- Based on the ASMedia ASM1061R chipset
- x1 PCIe interface card with up to 2.5Gb / s bus bandwidth
- Form Factor: Full-size Mini-PCIe card
- 2 vertical, internal SATA ports
- Compliant with the PCI Express 2.0 specifications based
- Supported by the built-in Windows drivers
- SATA: 2x SATA 6Gb/s port
- Conform to the SATA specification Rev. 3.2
- Conform to the SATA AHCI specification 1.3
- Data transfer deeds of up to 6Gb/s, 3Gb/s and 1.5Gb/s are supported
- For connecting SATA III, II and I hard drives and SSD suitable
- Supports Native Command Queue (NCQ)
- Supports RAID 0, RAID 1 and SPAN mode
- Automatic rebuild is supported
- System Requirements: Computer with a free mini PCI Express slot, Operating System Windows 8.1/8/7/Vista
- Package content: Mini-PCIe card 2x SATA 6Gb/s, manual
Abv:
We therefore strongly advise against using this website!
- Based on the ASMedia ASM1061R PCI Express 2.0 SATA 6Gb/s controller, PCI Express x1 interface allows communication speed of 2.5Gb/s and 5Gb/s.
- Compliant with PCI Express Base 2.0 specification
- Supports low-profile bracket
- Supports Windows built-in drivers
- SATA interface: 2x SATA 6Gb/s connector
- Compliant with SATA Revision 3.2
- Compliant with SATA AHCI specification Rev. 1.3
- Supports data transfer 6Gb/s, 3Gb/s, 1.5Gb/s
- For connecting SATA III, SATA II and SATA hard drives and SSD suitable
- Supports NCQ and port multiplier (Windows only)
- Bootable
- Optionally, the operation of RAID 0, RAID 1 or SPAN mode can used
- Supports Automatic Rebuild
- System Requirements: PC with one free PCI Express x1 slot, supports Windows 10/8.1/8/7/Vista
- Package content: Interface card, 2x SATA 6Gb/s PCIe 2.0 x1, manual, Low-profile bracket
Abv:
We therefore strongly advise against using this website!
The PCI Express SATA controller card provides a high-speed Serial ATA PHY interface up to 6 Gb/s using a native PCI Express interface. The card supports SATA 6 Gb/s devices compliant with the Serial ATA Revision 3.2 specification. It is also backward compatible with 1.5 Gb/s and 3.0 Gb/s SATA devices.
- Compliant with Serial SATA 3.0 specification, backward compatible with SATA2.0SATA1.0.
- Compliant with PCI-Express v3.0 specifications, backward compatible with PCI-Express v2.0.
- Support AHCI mode.
- Support for native command queue (NCQ).
- Support FIS switch or command switch based on port multiplier.
- Support hot swap and hot swap.
- Compatible with SATA6G, 3G and 1.5G hard drives.
- Bus interface: PCI-Express x1 slot
- Expansion interface: 4 SATA3.0 interfaces
- System requirements: There is an available PCI Express X1 slot, which also supports PCI-E X2 X4 X8 X16
- Operating system: Windows 10/8/7 (32/64 bit) / linux MAC OS
- Based on ASMedia ASM1064 PCI-Express SATA 6 Gb/s Controller
- Unique design of hard disk drive activity LED indicator: The LED flashes when there is read/write activity on any of the hard drives connected to this add-on card
- PCI-Express SATA controller card x 1
- Low-profile slot bracket x 1
- User Manual x 1
Abv:
We therefore strongly advise against using this website!
- Based on the Asmedia ASM3242 USB 3.2 Gen.2x2 host controller chipset
- Complies with Intel eXtensible Host Controller Interface Specification Revision 1.1
- Supports standard and low-profile desktop computers
- Supports drivers on Windows 8/8.1/10 32-/64-bit operating systems
- Complies with the PCI Express Base 3.1a specification
- PCI Express 4-Lane(x4) interface
- Supports PCI bus power management interface specification revision 1.2
- Supports one port of USB3.2 Gen.2x2
- Complies with the specification Universal Serial Bus 3.2 Revision 1.0
- USB 3.2 Gen.2x2 (20Gb/s) host ports, backward compatible with the USB 3.2 Gen.1 (10Gb/s), USB3.0 Super-Speed (5Gb/s), USB 2.0 High-Speed (480Mb/s), Full-Speed (12Mb/s) and Low-Speed (1.5Mb/s) interface
- Supports all USB-compatible data transfer modes (Control / Bulk / Interrupt / Isochronous)
- Internal HDD power connector to supply the USB ports with +5V
- Max. Power output USB-C port: 15W (5V/3A)
- PCI-Express USB 3.2 host controller card
- Low profile slot bracket
- User manual
Abv:
- A native PCI-Express single chip design
- Supports an internal USB 3.2 Gen. 1 socket capable for two expansion ports
- Compliant with PCI Express base spec. revision 2.0 backward compatible to revision 1.0a
- Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5Gbps
- Supports PCI-Bus Power Management Interface specification revision 1.2
- Compatible with PCI-E Mini Card Electromechanical specification revision 1.2
- Compatible with Full-Mini (F1) card type form factor
- Supports Windows 8.1 / 8 / 7 / Vista / XP / Server 2003-2008 32/64-bit
- USB 3.2 Gen. 1 Interface: Complies with Universal Serial Bus 3.0 specification revision 1.0
- Backward compatible to USB 2.0 and PCI-Express 1.0
- Compliant with Intel's Extensible Host Controller Interface(xHCI) specification revision 1.0
- Supports USB compliant data transfer types (Control/Bulk/Interrupt/Isochronour)
- Supports the following data transfer rate: USB 2.0 mode up to 480 Mbps, USB 3.2 Gen. 1 mode up to 5 Gbps
- Max. 5V/900mA power output to each USB 3.2 Gen. 1 Port
- Support up to four USB 3.2 Gen. 1 ports on a standard internal 19 pins box header
- 4-pin internal FDD power connector for extra power to the USB devices
- Fully Plug and Play compatible
- System Requirement: Computer system with one Mini PCI-Express slot available, Properly installed one of the supported OS mentioned above
- Renesas uPD720201
- Package Content: Mini PCI-Express to USB 3.2 Gen. 1 Host Controller Card, USB internal cabel 80cm x2, User Manual, Software Driver CD