InLine® Slot Bracket 2x USB 2.0 Type A female to 2x 5 Pin internal header 0.3m
2x USB 2.0 A female mounted on a slot bracket with connection cable for connection to the mainboard with 2x 5pin connectors.
- External: 2x USB Typ A female
- Internal: 2x IDC 5-pins female
- Connection cable In/Out round
Item no.:
33390
InLine® Serial slot bracket, 9-pin male to 10-pin internal connector 1:1
Slot cover with 9pin Sub-D plug, for connection of e.g. a 10 pin serial port on the mainboard.
- cable length 25cm
- 1:1 configuration
- pin 10 of the socket post connector is noch configured
InLine® Slot bracket DB25F to 26 Pin internal plug
Slot bracket with 25pin Sub-D socket, for connection of e.g. a 26pin parallel port on the Mainboard.
- pinout (IDC - Sub-D): 1-1, 2-14, 3-2, 4-15, 5-3, 6-16, 7-4, 8-17, 9-5, 10-18, 11-6, 12-19, 13-7, 14-20, 15-8, 16-21, 17-9, 18-22, 19-10, 20-23, 21-11, 22-24, 23-12, 24-25, 25-13, pin 26 not connected
InLine® Low Profile Slot Bracket with hole for DB9 connector
InLine® low-profile slot bracket for mounting 9pin. Sub D male or female connector. With this bracket, both male and female 9-pin Sub-D connectors can be mounted on the backplane of an enclosure/server using a free PCI slot. The lower profile of this bracket allows installation in low profile PC/enclosures. Material: SPCC steel, material thickness 0.8mm, nickel-plated surface
Item no.:
33208D
InLine® Slot Bracket DB9male to 10 Pin Internal header direct 1:1 0.6m
Slot cover with 9pin Sub-D plug, for connection of e.g. a 10 pin serial port on the mainboard.
- cable length 60cm
- 1:1 configuration (10pin - 9pin): 1-1, 2-2, 3-3, 4-4, 5-5, 6-6, 7-7, 8-8, 9-9, 10-nc
- pin 10 of the socket post connector is not configured
Item no.:
33208C
InLine® PCI / PCI-E / ISA Extension Card Slot Bracket 6 pcs.
InLine® bracket allows closing the free slots on the back plane panel of a case/server.
- Blind / closing panel
- For PCI Slot
- Material: aluminium
Item no.:
11107
InLine® eSATA Slot Bracket eSATA female external / internal SATA male 0.5m
Slot bracket permits connecting external SATA (eSATA) devices to internal SATA controller on mainboard or interface card. Cable is very well shielded and allows data transfer rates up to 6Gb/s.
- SATA plug 7 pin to eSATA socket in slot bracket
- Length ca. 0.5m
- SATA plug with security latch
Item no.:
27902
InLine® PCI bracket perforated, 2pcs. set
InLine® PCI bracket perforated, 2pcs. set.
- These brackets on one hand provide dust protection, on the other side they serve air circulation by their perforation design.
- 2 pieces per package
InLine® Slot Bracket with hole for 9 Pin Sub-D male or female 4 pcs.
InLine® bracket allows both male and female 9-pole Sub-D connectors to be mounted on the Back Plane panel of a Case/Server using a free PCI slot.
- It supports 9-pole Sub-D connectors
- Aluminium material
Item no.:
11109
InLine® PCI / PCI-E / ISA Low Profile Extension Card Slot Bracket 6 pcs.
InLine® bracket closes the free slots on the Back Plane rear panel of a Case/Server. The low profile of this bracket allows installation in PC/Low Profile Cases.
- Blank / closing panel
- For PCi Slot Low Profile
- Material aluminum
Item no.:
11108
InLine® Slot bracket for 2x Sub-D 9-pin, can be used on both sides, pack of 2
- Flexible application options: Supports both male and female 9-pin Sub-D connectors for maximum compatibility in IT environments.
- Easy housing integration: Simply mounts into a free PCI slot – ideal for professional IT systems and server housings.
- Robust metal design: Made of sturdy sheet steel for long-lasting durability and secure fastening of the connectors.
- Ideal for serial interfaces: Perfect for setting up or expanding RS232 connections in industrial or professional applications.
- Dual connection option: Space for two 9-pin Sub-D plugs or sockets – saves space and increases connection density.
The InLine® slot bracket allows easy installation of two 9-pin Sub-D plugs or sockets on the rear of a PC or server housing. Thanks to its standardised design, it fits into any free PCI slot and offers a clean, stable solution for integrating serial interfaces. The robust metal design ensures reliable fastening – ideal for industrial environments, server rooms or professional IT systems. Whether for control devices, measuring systems or serial communication: this slot bracket provides the ideal basis for connecting classic RS232 components. System houses, system integrators and industrial users in particular benefit from the flexibility and quality of this mounting aid.
- Material: sheet steel
- Mounting position: PCI slot (low profile not supported)
- Reception: 2x 9-pin Sub-D (m/f, individually assignable)
- Scope of delivery: Pack of 2
Item no.:
11109A
InLine® Slot Bracket 2x USB 3.0 A female / internal mainboard plug 0.5m
The bracket is suited to the rear of the internal USB 3.0 mainboard connection.
- Bracket with two USB 3.0 Type A connectors
- internal 19pin. Motherboard connector
- length about 0.5m
Item no.:
33390C
InLine® USB 2.0 Slot Bracket 2x USB Type A female to 1x 10Pin Connector 0.35m
InLine® slot bracket for connecting external USB 2.0 devices to the IDC port on the motherboard.
- External: 2x USB type A socket mounted on slot bracket
- Internal: 1x IDC 10-pin socket
- Connection cable In/Out round
Item no.:
33391
InLine® SCSI III U320 Slot Bracket 68 Pin mini Sub-D F/F interior to exterior
SCSI III adapter board, suitable for Ultra320
- 68 pin mini Sub D socket exterior to interior 68 pin mini Sub D socket
- exterior screw connection
- Ultra 320 (160 and 80) suitable
Item no.:
45550
InLine® PCI slot bracket with USB-C socket, USB-C to USB 3.2 front panel Key-A internal
Adapter cable for connecting USB-C devices to the internal USB 3.2 (Gen.2) port of the mainboard.
- Data transfer rate max. 10 Gb/s
- USB 3.2 (Gen.2) front panel connector (Key-A) to USB-C socket
InLine® Slot Bracket DB9 male to 10Pin internal female, 0.25m
Slot cover with 9pin Sub-D plug, for connection of e.g. a 10 pin serial connector on the mainboard.
- cable length 25cm
- serial->socket-post-connector: 1->1, 6->2, 2->3, 7->4, 3->5, 8->6, 4->7, 9->8, 5->9
- pin 10 of the socket-post-connector not configured
- AWG 28 strands
Item no.:
33209
InLine® eSATA Bracket 2x internal SATA male to external eSATA female 0.3m
This bracket provides connectivity for external SATA- (eSATA) devices to the internal SATA-controller on the mainboard or the interface card. The cable is extremely well shielded and allows transmission rates up to 3Gbit/s.
- 2x SATA male plug internal to eSATA female socket iexternal in a slot bracket
- Length ca. 0.3m
- AWG 26 and braid shielding
Item no.:
27904
InLine® Slot bracket USB-C to USB 3.2 front panel Key-A internal, 0.5m
Adapter cable for connecting USB Type-C devices to the internal USB 3.2 (Gen.2) port of the mainboard.
- Data transfer rate max. 10Gb/s
- USB 3.2 (Gen.2) front panel connector (Key-A) to USB Type-C socket
Item no.:
33446K
InLine® SAS HD Bracket with Cable ext. SFF-8644 to int. 4x SATA 0.5m
This SAS HD adapter mounted on a 50P Centronics frame in a PCI slot bracket is a passive SAS adapter PCB board with an external 36-pin Mini SAS HD connector (SFF-8644) on the one hand, and internally with 4x SATA connector on the cable on the other side. This adapter can be installed on more than one holder, it is possible to use that adapter optional in the PCI slot, in a (former) SCSI enclosure with 50-pin Centronics connectors or in a low-profile PCI slot, and it works in both directions. The adapter is for the construction of storage devices in short or tall cabinets, rack stations, external (SCSI) disk enclosures, server blade racks ect. suitable.
- External SFF-8644 connector on 4x SATA connector
- With 0.5m cable
- PCI slot bracket with 50P Centronics frame and low-profile PCI bracket
Item no.:
27659B
InLine® SAS HD low profile adapter bracket ext. SFF-8088 / int. SFF-8643 0.5m
This SAS HD adapter is a passive PCB board adapter with external 26-pin. Mini SAS connector (SFF-8088) on the one side, and internal 36-pin. Mini SAS connector (SFF-8643) with cable on the other side. This adapter can mount in case with low profile slot and works in both directions. The adapter is for the construction of storage devices in short or tall cabinets, rack stations, external (SCSI) disk enclosures, server blade racks ect. suitable.
- Adapter external SFF-8088 connector to internal SFF-8643 connector
- With cable
- Adapter with low profile PCI bracket
Item no.:
27656A
InLine® SAS Low Profile Adapter Bracket external SFF-8088 / internal SFF-8087
This adapter is a passive PCB board adapter with external 26-pin. Mini SAS connector (SFF-8088) on the one side, and internal 36-pin. Mini SAS connector (SFF-8087) on the other side. This adapter can mount in case with low profile slot and works in both directions. The adapter is for the construction of storage devices in short or tall cabinets, rack stations, external (SCSI) disk enclosures, server blade racks ect. suitable.
- Adapter external SFF-8088 connector to internal SFF-8087 connector
- Adapter with low profile PCI bracket
Item no.:
27650
InLine® SAS HD low profile adapter bracket ext. SFF-8088 / int. SFF-8643 0.75m
This SAS HD adapter is a passive PCB board adapter with external 26-pin. Mini SAS connector (SFF-8088) on the one side, and internal 36-pin. Mini SAS connector (SFF-8643) with cable on the other side. This adapter can mount in case with low profile slot and works in both directions. The adapter is for the construction of storage devices in short or tall cabinets, rack stations, external (SCSI) disk enclosures, server blade racks ect. suitable.
- Adapter external SFF-8088 connector to internal SFF-8643 connector
- With cable
- Adapter with low profile PCI bracket
Item no.:
27656C
