• Bluetooth standard: V5.0
• Chip: Realtek 8761B
• Supports Bluetooth Local Area Network (PAN), Bluetooth high quality audio (A2DP, HFP) and other Bluetooth services such as BIP, SPP, HCRP, FTP, OPP, DUN
• Frequency range: 2.4GHz (2402-2480 MHz)
• Operating system: Windows 7/8/10
• Interface: USB type A
• Data transfer rate: up to 10Mb/s
• Receive/transmit range: 20m

• Bluetooth version 5.0 with aptX low latency
• Supported codecs: aptX low latency, aptX, AAC, SBC
• Bluetooth profiles: A2DP
• Bluetooth range: Up to 10 meters
• Output signal connections: TOSLINK digital optical OUT, 3.5mm AUX OUT
• Input signal connections: TOSLINK digital optical IN, 3.5 mm AUX IN
• Input power: 5V DC, 500 mA (requires an USB-C port as power source)
• Latency: only ~ 40ms
• supports multipoint streaming for simultaneous playback to two Bluetooth headphones / speakers
• Mounting options: Sticky gel mounting strips, hook-and-loop tape
• Dimensions: 10.4x2.3x2.0 cm

• InLine Bluetooth Audio Transceiver
• TOSLINK digital optical audio cable (1.5m)
• 3.5mm AUX audio cable (1.5m)
• 3.5mm to RCA adapter cable (0.2m)
• USB C cable (0.8m)
• Sticky gel mounting strips
• Manual

• Never search for your keys again: Smart KeyFinder with Apple ‘Find My’ integration for quickly finding keys, bags or backpacks.
• Protect your valuables: Find stolen valuables such as coats or wallets with the tracker.
• Bright LED torch: With 300 lumens for optimal illumination at the front door, car or camping.
• Blinking light mode for more visibility: Ideal for the way to school, for cycling or for pets – ensures better visibility in the dark.
• Long battery life & fast USB-C charging: Up to 6 hours of light and recharged within 1.5 hours.
• Robust & weatherproof: IP65 protection against dust and water – perfect for outdoor activities, bicycles, scooters or your children's school bags.
• Compact & lightweight: Fits perfectly on a key ring or in any pocket – a practical companion for everyday life.

Say goodbye to searching for keys or lost items! The InLine KeyFinder is your practical helper for quickly finding your important items – whether keys, bags or your child's gym bag. Thanks to the Apple ‘Find’ app, you can easily locate misplaced items. The integrated flashing light mode ensures that you remain visible even in the dark, whether on the way to school, when riding a bike or for your pets. Especially for children or pets such as dogs and cats, the flashing light mode is an important safety factor to make them visible in the dark. In addition, the KeyFinder is equipped with a bright LED torch that provides up to 300 lumens of light to perfectly illuminate your surroundings – ideal for dark house entrances, camping or the car. The 300mAh battery provides up to 6 hours of use and can be recharged in just 1.5 hours via the modern USB-C port. Thanks to its IP65 protection, the KeyFinder is dustproof and splashproof, so it can be used without problems even in the rain or during outdoor adventures. The KeyFinder is not only suitable for everyday use, but also offers theft protection for your valuables, e.g. in the wardrobe or when travelling. Weighing just 15 g and with its compact design, it fits in any pocket or on a key ring and is your reliable companion.

• Bluetooth tracking with Apple ‘Find My’
• Battery capacity: 300mAh lithium polymer
• Charging time: 1.5 hours (USB-C)
• LED torch: Up to 300 lumens, 1-6 hours of use
• Flashing light mode: for better visibility in the dark
• Alarm volume: 65 dB
• Protection class: IP65 (dustproof & splashproof)
• Dimensions: 61.6 x 15.5 x 15 mm
• Weight: 15 g

Contents:

• 1x InLine® KeyFinder
• 1x USB-C charging cable 1m
• 1x user manual German/English

• Easy to locate: Works with Apple's "Where is?" network, ideal for your children's purses, bags, suitcases and school bags.
• Protect your valuables: Find stolen items like coats or wallets with the tracker.
• Long battery life: up to 10 months standby, wireless charging via Qi.
• Waterproof & robust: IPX5-certified against splash water & dirt - ideal for bikes, scooters and other outdoor items.
• Ultra-slim design: Fits perfectly in any wallet (only 2 mm thin), as a dog tag or for inconspicuous attachment to valuables.
• Long range: Bluetooth 5.3 with a connection distance of up to 50m - perfect for locating pets.

The InLine Wallet Finder is a smart tracker in a practical credit card format that allows you to easily locate your valuables via the Apple "Where is?" app. Whether it's a wallet, bag, suitcase, dog key ring, bike saddle, scooter or your children's school bag - the tracker card fits perfectly in any compartment and helps you find your things again. With a standby time of up to 10 months and Qi wireless charging, you don't have to worry about running out of battery. Bluetooth 5.3 technology provides a reliable connection with a range of up to 50 metres. Thanks to the IPX5 protection class, the Wallet Finder is protected against splash water and dust, making it suitable for outdoor activities. The integrated 75dB loudspeaker function ensures that you can locate your lost object acoustically at the touch of a button. The PU leather case supplied offers additional protection and an elegant look.

• Bluetooth version: 5.3
• Frequency range: 2400 MHz - 2483.5 MHz
• Transmission range: 50 m (unobstructed view)
• Battery life: approx. 10 hours at medium volume
• Weight: 11.7 g
• Compatible from Apple iOS 14.5 / iPadOS

Content of delivery:

• 1x InLine® Wallet Finder
• 1x Case with flap, PU leather
• 1x User manual German/English

• Modern Bluetooth 5.3 for faster and more stable connections
• Up to 20 m range for maximum freedom of movement
• Ideal for music streaming, file transfer & wireless devices
• Easy plug-and-play installation under Windows
• Compact and compatible with many devices

Turn your PC or notebook into a powerful Bluetooth device in no time! The InLine® Bluetooth 5.3 USB adapter allows you to easily and reliably connect to headsets, speakers, mice, keyboards or smartphones - without any cable clutter.

Thanks to Bluetooth 5.3, you experience stable connections, fast data transfer at up to 3 Mb/s and a range of up to 20 meters. Whether you want to enjoy music, print wirelessly or transfer files quickly - this adapter makes it possible.

The installation is particularly user-friendly: simply plug it in and get started straight away - no driver installation required under Windows 8.1, 10 or 11. It remains backwards compatible with older Bluetooth versions so that you can also integrate older devices without any problems.

Small but powerful - this adapter is the perfect companion for anyone who wants to connect their technology wirelessly.

• Bluetooth standard: V5.3
• Chip: Realtek
• Frequency range: 2.4 GHz (2402-2480 MHz)
• Interface: USB-A
• Compatible operating systems: Windows 8.1, 10, 11 (plug-and-play)
• Supported profiles: A2DP, PAN, HFP, SPP, HCRP, FTP, OPP, DUN, BIP
• Backwards compatible with Bluetooth versions 5.0, 4.2, 4.0, 3.0, 2.0 and 1.1
• Not compatible with OS X, Linux or TV devices

The Bluetooth 5.1 HiFi Audio Receiver from InLine transmits audio signals in highest quality (96kHz / 24-bit) either via Bluetooth e.g. from a smartphone or as DAC via USB-C e.g. from a PC to a HiFi music system or active speakers. For audio output, a RCA stereo or an optical Toslink connection is available. The receiver features a volume control, 7 preset equalizer profiles and an OLED display. A fast connection, intuitive operation and high range complement the excellent signal transmission. This makes the InLine Audio Receiver the perfect accessory for older AV receivers.

• Bluetooth: Version 5.1 with aptX HD
• Bluetooth chipset: Qualcomm QCC5125
• Supported codecs: LDAC, aptX, aptX-LL, aptX HD, AAC, SBC
• Bluetooth range: up to 30 meters
• Input: Bluetooth, USB-C audio
• Outputs: Toslink optical, 2x RCA analog stereo
• Power supply: 5V DC / 0.08A via included USB power adapter
• RCA output: 1.8 Vrms / 0dB
• Total harmonic distortion + noise (THD+N): B-weighted: 0.02%/1KHz 0dB
• Signal to noise ratio (SNR): -114dB
• Dynamic range: -115dB
• Crosstalk: -114dB
• Equalizer modes: POP, BASS, CLASSIC, DANCE, JAZZ, ROCK, NORMAL
• Dimensions: approx. 8.89 x 7.62 x 2.54 cm (without antenna)
• D/A converter: ES9018K2M SABRE32
• PCM support: 96kHz / 24-bit
• OLED display: 1" monochrome
• Housing: Aluminum
• Color: Black

Technical features power supply:

• Input voltage: 100-240V AC
• Input AC frequency: ~50/60 Hz
• Output voltage: 5.0 V DC
• Output current: max. 1.0 A
• Output power: 5.0 W
• Average active efficiency: 73.9 %
• No-load power consumption: 0.06 W

• Maximum 5X headphone power output power gain
• Two headphone outputs allow sharing music on the road
• Compatible with Apple and Samsung in-line remote control headphones
• Two levels of Bass Boosting
• S/N Ratio : > 90 dB (A-Weighting)
• Maximum Headphone Output Power: around 250mW / 16ohm
• Headphone Drive Ability: 16 - 150ohm
• Built-in Rechargeable Battery Life Time : > 8 hours
• Analog Output: 3.5mm Stereo Headphone Jack x 2
• Analog Input: 3.5mm Stereo Headphone Jack x 1
• Bass Boost Selection: Switch x 1
• Charging Input: Micro USB x 1
• LED: Power on, Battery Charging and Battery Low Indication
• Power Switch and Volume Control x 1
• Content: 1x InLine® Bass Boosting Dual Output Headphones Amplifier, 1x User’s Manual, 1x 3.5 mm 4-pole to 3.5mm 4-pole cable, 1x Micro USB cable

• Headphone Amplifier with 3-band equalizer
• Loudness switch and switch for the equalizer
• 2x 3.5mm stereo input Line-IN
• 1x 3.5mm stereo headphone output (Equalizer + Amplifier)
• 1x 3.5mm stereo output Line-OUT (Equalizer)
• 3 controls for treble (3KHz-20KHz), middle (200Hz-4kHz) and bass (20Hz-250Hz)
• 2 controls for balance (L / R) and volume
• Stereo Crosstalk: 90dB
• Suitable for headphone impedance 16-600 Ohm
• Micro-USB jack for power supply (5V / 0.5A), USB power adapter optional
• High-quality metal / aluminum construction
• Gold-plated contacts of audio jacks
• Content: InLine® AmpEQ Tone control headphone amp and pre-amp x1, Users Manual x1, Micro USB cable x1, 0.7m Audio Cable 3.5mm M/M x1, Magnet tape for connecting other modules x1

• Bluetooth: Version 5.0 with aptX HD, aptX Low Latency
• Supported codecs: aptX, aptX HD, aptX LL, SBC, AAC
• Bluetooth profiles: A2DP and AVRCP, GAIA, HSP und HFP
• Bluetooth range: Up to 20 meters
• Input: 2x 3.5mm Audio plugs, 1x USB Type-C (when connected to a PC)
• Outputs: Bluetooth / Can be used with 1 or 2 Bluetooth headphones simultaneously
• USB Audio Audio sampling rate: 48kHz / 16-bit / Compatible with Windows, MacOS, Linux / no driver installation necessary
• Rechargeable battery: Flight Audio Adapter: 180mAh / Charging case: 900mAh
• Input Power: Flight Audio Adapter: USB Type-C DC5V 500mA / Charging Case: USB Type-C DC5V 500mA (requires an optional USB power adapter)
• Battery runtime: up to 6h / up to 30h with charging case
• Operating temperature: -10°C - 45°C
• Storage temperature: -20°C - 60°C
• Supported sample rate: =48 kHz
• Enclosure: plastic
• Colour: black
• Dimensions Adapter: 5x3.9x1.5 cm
• Dimensions Charging-Case: 8x5x3,1 cm
• Weight Adapter: 20g
• Weight Charging-Case: 60g

• 1x InLine Bluetooth Flight Audio Adapter
• 1x Charging-Case
• 1x USB Type-A to USB Type-C cable 1m
• 1x Operating instructions

The InLine audio receiver combines a compact design with high-quality signal transmission and maximum performance for the demanding audio user. Audio signals are transmitted in the highest quality wirelessly via Bluetooth 5.3 or wired via RCA stereo to the receiver, amplified with up to 96 watts and then passed on to two passive stereo speakers. Up to 2 devices can be connected simultaneously via Bluetooth. Volume, bass and treble are intuitively adjusted via 3 controls. Make the InLine Audio Receiver the control center of your mini HiFi system and look forward to a fast connection, high range, intuitive operation and first-class sound quality.

• Bluetooth: Version 5.3 with aptX HD
• Bluetooth chipset: ATS2853
• Supported codecs: SBC, AAC
• Bluetooth range: up to 20 metres / 60 feet
• Inputs: 2x Bluetooth, 1x line-in stereo (2x RCA jack)
• Output: Loudspeaker connection stereo
• Power supply: 24V DC / 4.0 A via supplied USB power adapter
• Total harmonic distortion (THD): =0.5%
• Frequency range: 20Hz - 20kHz
• Signal to noise ratio (SNR): =98dB
• Input sensitivity: = 1V
• Dimensions: approx. 14.8 x 11 x 4 cm (without antenna)
• Housing: aluminium
• Colour: Black

• Headphone Amplifier with 3-band equalizer
• Loudness switch and switch for the equalizer
• Gain Switch (-10dB)
• 2x 3.5mm stereo input Line-IN
• 1x 3.5mm stereo headphone output (Equalizer + Amplifier)
• 1x 3.5mm stereo output Line-OUT (Equalizer)
• 3 controls for treble (3KHz-20KHz), middle (200Hz-4kHz) and bass (20Hz-250Hz)
• 2 controls for balance (L/R) and volume
• Stereo Crosstalk: 90dB
• Suitable for headphone impedance 16-600Ohms
• Micro-USB jack for power supply and charging (5V / 0.5A), USB power adapter optional
• High-quality metal / aluminum construction
• Gold-plated contacts of audio jacks
• Built-in rechargeable Lithium Polymer battery
• Battery capacity: 2200mAh
• Battery life: around 6 hours
• Charging time: around 2 hours
• Content: InLine® AmpEQ Tone control headphone amp and pre-amp x1, Users Manual x1, Micro USB cable x1, InLine® Premium Audio Cable 3.5mm M/M x1, Magnet tape for connecting other modules x1

• Supports DSD 2.8/5.6MHz playback
• Supports PCM 384KHz/32bit playback
• Supports DSD native or DoP
• Asynchronous transmission mode
• Compatible with Apple (via camera kit / optional accessories) and Android devices (with OTG adaptercable / optional accessories)
• Max. Headphone output power (at 1KHz and singlechannel):
  • 6.3mm socket: approx. 210mW at 16 ohms, approx. 190mW at 32 ohms
  • 3.5mm socket: approx. 110mW at 16 ohms, approx. 125mW at 32 ohms
• Headphone impedances from 16 - 600 Ohm can be used
• High Quality DAC Chipset - ES9018Q2C
• High quality 12AU7 tube amplifier for crystal clear audio playback
• High quality headphone amplifier

• Treble:
  • Control range: 3KHz-20KHz
  • Trim range: -12dB to +12dB
  • Center frequency: 18KHz
• Middle:
  • Control range: 200Hz-4KHz
  • Trim range: -10dB to +10dB
  • Center frequency: 1KHz
• Bass:
  • Control range: 20-250Hz
  • Trim range: -14dB to +14dB
  • Center frequency: 100Hz

• Hardware Loudness EQ
• MM/MC turntable selector switch
• Analog volume control
• Supports ASIO
• Power by DC24V via external power supply unit
• LED indicators for DSD and PCM playback and input status
• Metal case
• Integrated de-pop function to suppress pop noise during PC startup and shutdown
• Supported operating systems: Windows 10/8.x/7 (32/64-bit) and MAC OS X

• 1x InLine® AmpUSB-EQ USB DAC
• 1x USB cable
• 1x Power adapter 24V / 2A (dimensions hollow plug: outside 5.5, inside 2.1 mm)
• 1x Drivers and software CD, with JRiver Media Center License Key
• 1x Operating instructions

• Supports DSD128 5.6MHz playback
• Supports PCM 384KHz/32bit playback
• Supports DSD native or DoP (DSD over PCM)
• Asynchronous transfer mode
• SNR : around 110dB (A-weighting)
• Max. Headphone Output power (at 1KHz and single channel): around 210mW / 16Ohms and around 190mW / 32Ohms
• Headphone Drive Ability: 16 - 600Ohms
• High Quality DAC-Cirrus Logic CS4392
• High Quality Headphone Amplifier
• Opamp are +/-12V powered by internal power boosting circuitry
• 6.3mm & 3.5mm headphone outputs
• Toslink S/PDIF Digital output
• Analog Volume Control
• Supports ASIO and WASAPI
• Integrated de-pop function
• Powered by 12V DC PSU
• LED indicators for DSD and PCM playback
• Very fine finishing metallic case
• Vacuum tube type 12AU7 / ECC82
• Supported Operating systems: Windows 10, 8.1, 8, 7, Vista, XP 32/64-bit and MAC OS X (10.6 or above), works with Android portable devices (with OTG adapter). Compatible Apps with DSD audio playback are available in the app stores and possibly connected with full functionality with additional costs (in-app purchases, such as App "Onkyo HF Player")
• Dimensions (LxWxH): 11cm x 8.1cm x 8cm
• Content: InLine® AmpUSB 384KHz/32bit DSD USB Audio DAC, User Manual, USB cable, Driver and Software CD with JRiver Media Center License Key, 12VDC power adapter (Euro plug)