Multimeter | Temperatursensor & mehr Geräte

InLine® PC and Server Mainboard Testing Set 5 parts

Simple set for testing of mainboards, without using the long cables from the casing. The set consists of 2 pushbuttons, 2 LED's and 1 speaker, which are connected directly to the post connectors of the mainboard.

1x Power pushbutton
1x Reset-pushbutton
1x Power LED
1x HDD LED
1x PC-speaker

Item no.: 59910

InLine® Voltage Tester 200 - 250 Volts

Voltage tester helps detect DC voltages between 200-250 volt. Display via small glow lamp in handle.

Shaft length ca. 60mm
Isolated shaft
Pocket clip
3.0 X 60 mm

Item no.: 43000I

InLine® Digital Multimeter, with temperature sensor

The meter is a digital hand-held multimeters with 3.5-digit LCD display for measuring DC and AC voltage, DC current, resistance, diodes, transistors, temperature and continuity test.

DC voltage measurement: 1mV-600V
AC voltage measurement: 0.1V-600V (40-400Hz)
Measuring DC current: 1µA-10A
Resistance: 0.1 Ohms to 2 MOhms
Temperature measurement: -20 to 1000°C, enclosed temperature sensor with 1m cable
Low battery display
Operating temperature: 0 to 40°C
3.5-digit display
Power supply: 9V battery
Dimensions: 138 x 68 x 31mm
Weight: 170g

Item no.: 43117

InLine® Reflective Marker Tapes for Digital rpm-Meter

Replacement adhesive strips for InLine® Digital Tachometer (Manufacturer number 43111). The tape reflects the laser beam of the measuring device. Please note: The delivery of the tachometer Reflector includes the strips already.

Item no.: 43111R

InLine® PoE / PoE+ tester

The PoE Tester is suitable for testing the PoE / PoE + connections to IEEE 802.3af and IEEE 802.3at compliant with a voltage of 37-57V for. Other standards as Telephone / ISDN voltages are not supported. Connect the RJ45 connector of the PoE tester using the supplied short cable, the other end of the cable to the test RJ45 port. The following display options are available: 1. The LED lights Endspan: There is a PoE voltage via pin 1,2,3,6 in Endspan mode to the socket. 2. The LED lights Miadspan: There is a PoE voltage via pin 4,5,7,8 in Midspan mode to the socket. 3. No LED lights up: The tested RJ45 connector does not have PoE voltage.

Technical specifications: Operating voltage: 24V-60V AC / DC
Operating Current: <10mA
Insulation voltage:> 1500V AC

Item no.: 79999I

InLine® battery tester with LCD display, for round and button cell batteries

With the InLine® Universal Battery Tester you can test the charge state of all standard batteries as well as rechargeable battery packs. Over 12 different battery types can be tested. The capacity state of the battery is displayed on the LCD indicator after inserting the battery in the suitable slot.

Compact battery tester
With LCD display
For battery types: AAA, AA, C, D, 9V, Lady N (LR1), CR123A, CR2, CR-V3, 2CR5, CR-P2 and button cells and more
Battery charge-state indicator in 3 goups of 5/5/8 bars (weak, normal, good)
Power supply: 1x Micro AAA battery (not included)

Item no.: 01285

InLine® Tester for RJ45 Cables and Connectors with 9 control LEDs

Tester for patch cable Twisted-Pair and ISDN/phone cabling, cable and Installation. Displays each wire and shield with 9 LEDs. Ready installed electrical networks may be tested on throughput, assignment, function and shielding. Contents include remote adapter. Requires one 9V battery.

Item no.: 79998A

InLine® Voltage Tester up to 380 Volt

Voltage tester up to 380 Volt
With voltage and polarity display
Voltage range: 6-400V AC
Display elements: 6-12-24-50-110-220-380V LED
Frequency range: 50-500 Hz

Item no.: 43004I

InLine® USB Smart Control, Multimeter, charge monitoring

The InLine® USB SmartControl Multimeter combines overheating-,
overcurrent- and overvoltage- protection as well as timer and a capacity counter in one device.The following control indicators can be selected one by one at the push of a button:

Overall safety status
Overheating protection
Overcurrent protection
Overvoltage protection
Capacity counter
Previous Charge (displays the mAh of the previous charging process)
In addition, a timer can be set for how long a charging operation shall last and then be terminated automatically. The choice is 2, 4, 6, 8, 10 hours

Specification:

Length: 1m
Weight: 43g
Voltage: From 4.5 to 20V
Current: From 0 to 2.5A
Power consumption: 40mW
Scope of delivery: InLine® USB Smart Control, user manual

Item no.: 66761

InLine® Multimeter Dual-Display, with PC connection via USB, CAT III / CAT IV

Multimeter with dual display, for measuring voltage, current, resistance, capacitance, frequency, continuity test, temperature. Digital multimeter with PC connection for recording and logging of measured values. This device complies with IEC 61010-1:2001, CAT III 1000V and CAT IV 600V overvoltage standards. The dual-display display shows the measured values digitally in digits and analogue as a bargraph, e.g. to better display fluctuations in the measurement.

Display: 2x 4 digits, resolution 6600 + bargraph
connect to the PC via USB port (Windows software)
True RMS measurement (effective value measurement)
Relative measurement
Automatic switch-off
Hold data
LED backlight
Auto / manual range selection
Low power display
Diode / continuity test
Measuring ranges / tolerances:
Direct voltage (DC): 660mV/±0.5%, 6.6V/66V/660V/±0.8%, 1000V/±1.0%
AC voltage (AC): 660mV/6.6V/66V/660V/±1.0%, 1000V/±1.5%
Direct current (DC): 660µA/6000µA/±1%, 66mA/600mA±1.5%, 10A/±1.8%
Alternating current (AC): 660µA/6000µA/±1.5%, 66mA/600mA±1.8%, 10A/±2
Widerstand: 660Ohm/6,6KOhm/66KOhm/660KOhm/6,6MOhm/±1,2%, 66MOhm/±2%
capacitance: 6.6nF/±5.0%, 66nF/660nF/6.6µF/±3.0%, 66µF/660µF/3.3mF/±5.0%, 66mF/>±5.0%
Logic frequency: 6Hz~66MHz ±(0.1% +3)
Power frequency: 6Hz~66kHz ±(0.05% +8)
Duty cycle: 1% ~ 99%
Temperature: -55°C ~ 0°C/± 5.0%, 1°C ~ 1000°C± 2.0%
Requires 1x 9V block (included)
Dimensions: 195x90x50mm, weight: ca.500g
Package contents: Multimeter, test strips, USB connection cable with coupler, temperature sensor, 9V battery, software CD

Item no.: 43126

InLine® Online PoE / PoE+ tester Live-Test

The PoE Tester is suitable for testing the PoE / PoE + connections to IEEE 802.3af and IEEE 802.3at compliant with a voltage of 37-57V for. Other standards as Telephone / ISDN voltages are not supported. Connect the RJ45 connector of the PoE tester using the supplied short cable, the other end of the cable to the test RJ45 port. The following display options are available:

1. The LED lights Endspan: There is a PoE voltage via pin 1,2,3,6 in Endspan mode to the socket.
2. The LED lights Miadspan: There is a PoE voltage via pin 4,5,7,8 in Midspan mode to the socket.
3. No LED lights up: The tested RJ45 connector does not have PoE voltage.

Technical specifications: Operating voltage: 24V-60V AC / DC
Operating Current: <10mA
Insulation voltage:> 1500V AC

Item no.: 79999P

InLine® Network Cable Tester for BNC RJ11 RJ45

This passive tester for Ethernet Lan networks and telephone systems is ideal for testing the function, shielding and wiring of RJ45, RJ11, ISDN, UTP, STP and BNC cables. Coaxial cables should be tested with a BNC adapter (50ohm). The tester can be set to automatic and manual function and the values are displayed via a 9-LED light bar.

Passive Ethernet Tester
Compatible: EIA/TIA 356/568/568B/Token Ring
Main device connections 2x RJ45 female.
Remote unit device connections 1x RJ45 female.
Power supply 9V alkaline battery
Tester dimensions 103x60x26mm, 103x30x26mm
Tester weight 120g + 40g
Supplied with leatherette case and adapters

Item no.: 79998

InLine® Multifunction battery tester, measuring device with LCD display

Precise determination of the battery and rechargeable battery status
LCD display with 18-bar capacity indicator
Compatible with over 12 battery types
Compact design for mobile use
Easy handling, no external power source required

The InLine® multifunction battery tester is an indispensable measuring tool for various professional applications. With the practical LCD display and the three-stage condition rating (low, normal, good), batteries can be tested quickly and reliably. The device supports a wide range of common battery types, including AAA, AA, C, D, 9V, Lady N (LR1), CR123A, CR2, CR-V3, 2CR5, CR-P2 and button cells. Thanks to its compact design, the battery tester is suitable for mobile use in workshops, technical departments or retail outlets. The simple operation enables quick tests without an additional external power supply. Only one AAA micro battery is required for operation (not included).

Item no.: 01285T

InLine® Digital Multimeter with USB to PC data transfer and RMS measurement

Digital Multimeter with PC interface for capturing and logging of measured values. This device complies with IEC 61010-1:2001, CAT III 1000V and CAT VI 600V overvoltage standards

Display: 4 digits, Resolution 6000 counts
with a USB port to connect to the PC (Windows software)
True RMS measurement
Relative measurement
Automatic shutdown
Data hold
LED backlight
Auto / manual ranging
Low-Power display
Diode / continuity test
Measurement range / tolerances:
DC Voltage: 600mV / ± 0.5%, 6V/60V/600V / ± 0.8%, 1000V / ± 1.0%
AC Voltage: 600mV / 6V/60V/600V / ± 1.0%, 1000V / ± 1.5%
DC Current: 600µA/6000µA/60mA/600mA/6A/10A / ± 1.5%
AC Current: 600µA/6000µA/60mA/600mA / ± 1.8%, 6A/10A / ± 3.0%
Resistance: 600Ohm/6KOhm/60KOhm/600KOhm / 6MOhm / ± 0.5%, 60Mohm / ± 1.5%
Capacitance: 60nF / ± 3.0%, 600nF/6µF/60µF/300µF / ± 5.0%
Logic frequency: 1Hz ~ 1MHz ± (0.1% +3)
Linear frequency: 6Hz ~ 10kHz ± (0.05% +8)
Duty Cycle: 1 % ~ 99%
Temperature: -55°C ~ 0°C / ± 5.0%, 1°C ~ 1000°C requires ± 2.0%
Requires 1x 9V block battery
Dimensions: 190x90x40mm, weight: ~500g
Packing content: multimeter, test stripping, USB connection cable with coupler, 9v batterie, temperature sensor, software CD

Item no.: 43114

InLine® Multimeter with Auto-Range, pocket size

Pocket-sized multimeter, only 130x62x27mm
Auto Range: ACV/DCV/Resistance/Continuity/Diode/Temperture/NCV/mA/A
DC Voltage range: 200mV/2V/20V/200V/600V
AC Voltage range: 200mV/2V/20V/200V/600V
DC Current range: 2000mA to 10.00A
AC Current range: 2000mA to 10.00A
Resistance range: 200Ohm/2kOhm/20kOhm/200kOhm/2MOhm/20MOhm
Temperature range: -200°C to 1200° C
1999 LCD display, size: 44x30 mm
NCV/LIVE test
True RMS
Safety rating: CAT III 600V
Auto power off
Backlight/Torch
Power: 2x 1.5V battery AAA (included)

Item no.: 43117A

InLine® Digital Multimeter 3 in 1 with RJ45/RJ11 Cable Tester and Battery Tester

The 3-in-1 digital multimeter has been designed as a combination of the functions of a digital multimeter, a tester for modular and network cables, and for measuring batteries

DC voltage measurement. 0.1 mV to 1000V
AC voltage measurement: 0.1 mV to 700V
AC-/DC current measurement: 0.1µA to 10A
Resistance measurement: 0.1 Ohm to 200 MOhm
Diode test
Beeper
Cable assignment testing for short circuits, faulty wiring, wire replacement, split pairs, shielding
Battery tester: For batteries with 1.5/6/9V voltage
Backlight display with 3.5 digits
Power supply: 9V battery
Safety: CAT II 1000V / CAT III 600V IEC1010-1
Operating temperature: 0 to 40°C
Dimensions: 180 x 85 x 44 mm
Weight: 360g

Item no.: 43115

InLine® Multimeter with Auto-Range and Autoscan, pocket size

Pocket-sized multimeter, only 130x62x27mm
Auto Range: ACV/DCV/Resistance/Continuity/Diode/Temperture/Capacitance/NCV/LIVE/mA/A
Auto Scan: ACV/DCV/Resistance/Continuity/mA/A
DC Voltage range: 400mV/4V/40V/400V/600V
AC Voltage range: 400mV/4V/40V/400V/600V
DC Current range: 4000mA to 10.00A
AC Current range: 4000mA to 10.00A
Resistance range: 400/4k/40k/400k/4M/40MOhm
Capacitance range: 4.000nF to 1.000mF
Temperature range: -200°C to 1200°C
Frequency range 10Hz to 40kHz
3999 LCD display, size: 44x30 mm
NCV/LIVE test
True RMS
Safety rating: CAT III 600V
Auto power off
Backlight/Torch
Power: 2x 1.5V battery AAA (included)

Item no.: 43117B

InLine® Infrared Thermometer with LCD Display

Infrared thermometer with LCD display for simple, non-contact temperature measurement of surfaces.

Measurement range: -50°C to 500°C (- 58°F to 932°F)
TAMB measurement: 0°C to 50°C
Over range indication: "OL" or "- OL"
Resolution: 0.2
Field of view: 8:1
Typical Distance to Target: up to 1.5m
Emissivity: 0.95
Auto power off: 20S
LCD- Back light
Ambient temperature(TAMB) measurement
Display selection
MAX, MIN, AVG value selectable
Hold function
Low battery indication

Item no.: 43119

InLine® Digital Multimeter 5 in 1

The 5-in-1 Multimeter combines in addition to the standard electrical measurement values, the temperature, humidity, brightness and sound level measuremen in one device.

DC voltage measurement: 0.1mV-600V
AC voltage measurement: 1mV-600V (40Hz-500Hz)
Current measurement AC / DC: 10mA-10A (AC: 40Hz-200Hz)
Temperature measurement: -20 to 1000°C
Frequency Measurement: 1Hz to 200kHz
Humidity 30% to 90%
Sound level: 35dB to 100dB
Brightness: 4000/400000Lux
Diode test
Continuity test
Data hold memory function
ATO-RANGE
Auto power off
Overload protection
Relative measurement
Backlight display, 4-digits
Power supply: 9V block
Safety: IEC1010-1 CAT III 600V
Operating temperature: 0 to 40°C
Dimensions: 185 x 85 x 44 mm

Item no.: 43116

InLine® Multimeter with touch pad and illuminated display, CAT III / CAT IV

Multimeter with touchpad operation, double value display and background illumination of protection class CAT III 1000V / CAT IV 600V. The multimeter has no mechanical switching of the measuring ranges and is therefore less susceptible to dirt. The measuring range is selected by a simple tip on the corresponding key. The display has a bright backlight, which allows easy reading of the measured values.

Display: Large 2x 4 digits double value display, resolution 6000, dimensions approx. 62X50mm, with LED backlight
Protection class CAT III 1000V / CAT IV 600V
Digital calibration.
2-color backlighting to display various operating states.
Automatic AC / DC switching
AC and DC voltage measurement: 6/60/600/1000V
Current measurement 600/6000µA, 60/600mA, 6/10A
Resistance measurement: 600Ohm, 6k/60k/600kOhm, 6M/60MOhm
Measurement of capacitance: 6n/60n/600n, 6µ/60µ/600µ, 6m/60mF
Continuity check 0~600.0 OHM
Diode test 0~3.0V
Frequency and duty cycle measurement: 0~999.9kHz
Temperature measurement: -200 to 1000 °C
Delivery includes: multimeter, test strips, temperature sensor, manual, batteries (2X 1.5V type AA).

Item no.: 43127