- HT-336G crimping tool
- Supports RG58 RG59 RG62 RG174 coaxial cables
- Supports WBC110/195/200/240 coaxial cables
- Burnished steel body
- Green insulated handle
- Mini-ratchet, 11cm long, with right/left lock
- Set with 12 bits
- 3x Philips, 2x PZ, 2x slot, 2x square, 2x hex/Allen, 1x adapter for optional nuts
- in a rigid plastic box
- 18mm blade
- Ideal for LSA modules
- Excess cable cutting
- Unlocking blade
- Hook/Wire puller
- Lan Precision Cutters
- Ideal for UTP/STP round cables
- Flush cutters
- Material stainless steel
- 10 mm breakable blade
- Interchangeable blade
- Plastic handle
- Steel blade guide carriage
- Blade safety lock
- 14 individual bits in one screwdriver:
The handy pocket Allen screwdriver set from InLine in pocket knife design contains 5 Allen keys and 7 different double bits for 4mm hexagonal pickup: Slotted and phillips head 1.5mm/PH000, 2mm/PH00, 2.5mm/PH0, Torx T4/T8, T5/T9, T6/T10, T7/T15. - Magnetic bit holder:
The magnetic head of this screwdriver with automatic loading system simplifies to keep the bit of your choice in place while you work. The bit holder makes work easier and saves you from constantly losing your bits and holds the screws on magnetic bits, thereby prevents the otherwise ever-new positioning of the screw. - Simply changing the bits in a few steps:
Rotate the drum inside the handle until your desired double bit reaches the position of the removal opening at the end of the handle. Remove the double bit and insert it into the hexagon socket at the front. You have the possibility to adapt the length of the screwdriver from 120mm to 185mm infinitely to your needs. To do this, turn the black corrugated fixing screw, pull out the screwdriver at the bit socket and fix the fixing screw again.
- Front clamping pliers
- Supports cable ties from 2.4 to 4.8 mm
- Adjustable tension control
- Supports 8-pin 8-contact plug (RJ45)
- Supports 8-pin 8-contact plug (Hirose RJ45)
- Supports lan Twisted Pair cables
- Burnished steel body
- Green handle
- Metal construction
- Rubberized, non-slip handle
- For LAN and ISDN connectors RJ45 8pin (8P/8C)
- Rubberized handles for a secure grip, 2-color
- For electronics work and hobby home improvement ideal
- Hardened steel
- Precise cutting - / grip tool for clean work
- RJ11 (6P4C)
- RJ12 (6P6C)
- RJ10 (4P4C and 4P2C)
- RJ45 (8P8C, 8P6C, 8P4C, 8P2C, ISDN and TP)
- DEC plugs (for DSL splitter with offset latch)
- with stripping and cutting function
- 1 screwdriver handle
- 3 philips insert bits: PH1.5, PH2, PH2.5
- 3 slot insert bits: 1.5, 2.0, 2.5mm
- 4 torx insert bits: T5, T6, T7, T10
- 1 external outer Torx insert bit: TN8
- 1 hexagon insert bit: HN2.5
- in synthetic leather bag
- Holder for integrated circuits
- 8-point articulation
- Two micro clamps
- Stable base
- Viscose sponge
- Ideal for cleaning the tip
- Dimensions 5x5x1cm
- Holder for electric soldering irons
- Plastic base with spiral support
- Plastic invitation with metal protection
- Includes viscous tip cleaning sponge
- 6x slot: 1.0, 1.2, 1.4, 1.8, 2.4, 3.0mm
- 3x Phillips: #00, #0, #1
- 1x STL
- 1x magnetized pickup
- Adjusts automatically to lead thickness
- Cuts stiff and flexible cable wires up to AWG14 (ca. 2mm² diameter)
- Cuts isolation from AWG12 (ca. 3.3mm²) to AWG28 (ca. 0.2mm²)
- Isolation can be removed up to a length of max. 20mm
- Isolation thickness may be adjusted via knurled screw
- 10 individual bits in one screwdriver:
The InLine ratchet screwdriver contains 10 different bits. Following bits for standard bit holders 4mm pickup hexagonal are included: Phillips head 00/0/01, Slotted 1,5/2/3mm, torx T5/T6/T8/T10 - Magnetic bit holder:
The magnetic head of this screwdriver with automatic loading system simplifies to keep the bit of your choice in place while you work. The bit holder makes work easier and saves you from constantly losing your bits and holds the screws on magnetic bits, thereby prevents the otherwise ever-new positioning of the screw. - 3-way ratchet functionality:
Use the 3 way ratchet setting to quickly select your desired direction of rotation: forward, reverse and locked mode. Seamless adjustment of the >direction will bring you quickly and comfortably to your destination. - Simply changing the bits in 3 steps:
To change the bits, pull back the rubberized handle, then select your desired bit in the round selection chamber by rotating the bit chamber. Press the transparent handle to move the selected bit into the bit holder, select the direction of rotation on the wheel just in front of the bit holder. The screwdriver is ready to use, now. Have fun at work!
- screwdriver handle with right / left ratchet
- 9 bits + 5 Allen key bits
- small flat pliers
- Cable cutter
- Tweezers
- 8 Allen keys
- ESD wrist strap
- Accessory Box
- IC puller
- 3-point tweezers
- Effective ESD protection for sensitive components: The matt surface reliably prevents static discharges when handling sensitive electronics.
- Compact, practical size: 90x60 cm - ideal for workstations in technical and repair areas.
- Direct earthing connection included: supplied with spiral cable and alligator clip for safe discharge of static charges.
- Durable and easy-care design: Robust PVC material with a long service life, easy to clean and non-slip.
- Versatile use in professional environments: Ideal for IT workshops, repair stations, production environments or training workstations.
The InLine® antistatic work mat was specially developed for professional use in the electronics and IT sector. It offers reliable protection against electrostatic discharge (ESD) and thus protects sensitive electronic components during maintenance, repair or assembly. With a compact size of 90x60 cm, it is the ideal carpet pad for workstations in the technical and service sector. Its flat height of just 2 mm provides an ergonomic work surface without being bulky or obstructing tools. The matt surface is non-slip and made of high-quality, conductive PVC. It is characterized by high durability and easy maintenance and is therefore particularly durable. The scope of delivery includes a spiral cable with crocodile clip, which enables a simple connection to an earthing point. This creates a safe, standard-compliant working environment - essential for workshops, system houses or even the IT sector in companies. The InLine® antistatic work mat is suitable for both permanent workstations and mobile applications, e.g. for rollouts or technical training. Its combination of protective function, stability and easy handling makes it an indispensable accessory for professional work with sensitive electronics.
- Material: PVC
- Color: Grey
- Surface resistance top side: 10⁶ ~ 10⁹ Ohm
- Surface resistance bottom side: 10³ ~ 10⁵ Ohm
- Thickness: 2 mm
- Dimensions: 90x60 cm
- Scope of delivery: work mat, spiral cable, crocodile clip
