Specification:Standards and protocols:
- IEEE802.3i 10Base-T
- IEEE802.3u 100Base-TX
- IEEE802.3ab 1000Base-T
- CSMA/CD
- TCP/IP
- 5x 10/100/1000 Mb/s Auto-Negotiation ports
- MAC Address Auto-Learning and Auto-Updating
- IEEE802.3x flow control for Full Duplex mode and Backpressure for Half Duplex mode
- Backbone bandwidth: 1 Gb/s
- MAC Address Table: 4K
- Forwarding rate: 1000Base-T: 1488000pps/Port
- Transmission method: Store-and-forward
- Ports: 5x 10/100/1000Mb/s Auto-Negotiation RJ45 ports (Auto MDI/MDIX)
- 10Base-T: UTP cable Cat. 3, 4, 5 (max. 100 meter)
- 100Base-TX: UTP cable Cat. 5, 5e or higher (max. 100 Meter)
- 1000Base-T: UTP cable Cat. 5, 5e or higher (max. 100 Meter)
- Operating temperature: 0°C ~ 60°C
- Storage temperature: -10°C ~ 70°C
- Humidity in operation: 10% ~ 90% non-condensing
- Storage humidity 5% ~ 90% non-condensing
- Power (red)
- Link/Act
- 1000M (blue)
Weight: approx. 154g
Content of delivery:
- 1x switch
- 1x user manual GE/EN
- 1x external power supply 5.0V / 1.0A
- 4x rubber feet
- Duplex LC port
- Singlemode 1310nm (SFP)
- 1.25Gbps
Technical data
Standards and protocols:
- IEEE802.3i 10Base-T
- IEEE802.3u 100Base-TX
- IEEE802.3ab 1000Base-T
- CSMA/CD
- TCP/IP
- 8x 10/100/1000 Mb/s auto-negotiation ports
- Automatic learning and automatic updates of MAC addresses
- IEEE802.3x flow control in full duplex mode and 802.3z flow control asymmetric
- Backbone bandwidth: 1 Gb/s
- MAC address table: 8K
- Forwarding rate 10Base-T: 14880pps/port
- Forwarding rate 100Base-TX: 148800pps/port
- Transmission method: store-and-forward
- Number of ports: 8x 10/100/1000Mb/s auto-negotiation RJ45 ports (auto MDI/MDIX)
- 10Base-T: UTP cable Cat. 3, 4, 5 (max. 100 meters)
- 100Base-TX: UTP cable Cat. 5, 5e or higher (max. 100 meters)
- 1000Base-T: UTP cable Cat. 5, 5e or higher (max. 100 meters)
- Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
- Storage temperature: -40°C ~ 70°C (-40°F ~ 158°F)
- Operating humidity: 10% ~ 90% non-condensing
- Storage humidity 5% ~ 90% non-condensing
- Power
- Link/Act
- 1000M
Weight: 279g
Scope of delivery:
- 1x Switch
- 1x operating instructions DE/EN
- 1x external power supply 5.0V / 1.0A
- Powerful 10 Gigabit SFP+ transceiver module for high data transfer rates of up to 10.3 Gb/s
- Compatible with IEEE 802.3ae and SFP MSA as well as SFF-8431 for easy integration
- Optical LC duplex interface for multimode fiber (OM3) with a range of up to 300 meters
- Digital Diagnostics & Monitoring (DDM) function for real-time monitoring of module performance
- Hot-pluggable design for flexible network installations
The InLine® SFP+ module is a powerful and reliable solution for use in professional network environments. With a data rate of up to 10.3 Gb/s and a range of 300 meters, it is ideal for high-speed data connections in data centers, corporate networks and storage area networks (SANs).
The module is compliant with the IEEE 802.3ae, SFP MSA and SFF-8431 industry standards and can be easily integrated into existing network infrastructures. It has an LC duplex interface and uses 850nm VCSEL laser technology, which ensures reliable and efficient data transmission. Thanks to the digital diagnostic monitoring (DDM) function, module performance can be analyzed in real time, facilitating maintenance and increasing network security.
With an operating voltage of +3.3V and a hot-pluggable design, the module is easy to install and replace without disrupting ongoing operations. The robust design and operating temperature of 0°C to 70°C make it a reliable choice for demanding network environments.
Technical specifications:
- Wavelength: 850nm
- Average optical power: -6.5 dBm ~ -1 dBm
- I2C interface with integrated digital diagnostics & monitoring
- Electrical interface according to SFF-8431
- Pin definitions: 1-10 in the BEZEL direction, 11-20 in the ASIC direction
- Storage temperature: -40 °C to 85 °C
- Switch mode (Normal, VLAN (the switch supports the isolation of each port, but each port can still communicate with the uplink port), CCTV (the switch supports a maximum distance of 250 meters with a transmission speed of 10Mbps.
- Switch bandwidth
- PD type (PD=powered devices): Enhance: PD supports no PoE according to IEEE802.3at/af, Standard: PD supports PoE according to IEEE802.3at/af, Legacy: Using a Cisco-PD with ist own PoE standard
- PD Reboot by deactivating/activating the corresponding port
- PSE power fine (PSE=power supply equipment): This feature can increase the overall performance of the PoE budget
- PSE port priority: Here you can set the PoE prioritization per port between high, medium and low
- PSE port enable: Through this every individual port can be activated / deactivatedPSE port power: With this function, the PoE power can be selected in steps of 2W between 8W-32W
- Fan control: This function gives you the option of specifying fan operation. You can choose from "Always On", "20% PB" (when the switch spends 20% of its power budget), and "40% PB".
- Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T,IEEE 802.3z 1000BASE-X Gbit/s Ethernet over Fiber-Optic, IEEE 802.3x Full Duplex and flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
- Ports: 24x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, 2x 1000Mb/s SFP
- PoE ports: 1-24
- PoE budget: 380W
- Total output: 420W
- LCD display: Real-time display of PoE operating status
- PoE output power: Max. 32 watts per port
- LED indicators: PWR, LNK/ACT PoE
- Network cable: 10BASE-T: UTP Category 3, 4, 5 cable (100m)
- 100BASE-TX: UTP Category 5, 5e cable 100m)
- 1000BASE-T: UTP Category 5, 5e cable (100m)
- 1000BASE-SX: MMF, SMF
- MAC address table: 8K, automatic learning, automatic updates
- Jumbo Frame: 9216 Bytes
- Packet buffer: 4.1Mbit
- Transmission method: Store-and-forward
- Packet forwarding rate: 38.69Mpps
- Bandwidth: 52G
- Number of fans: 3
- Dimensions (W x D x H): 440x232x45mm
- Weight: appr. 3.7kg
- Mains input: 100~240V AC, 50/60Hz
- Environmental conditions: Operating temperature -10-60°C, storage temperature -40-70°C, humidity in operation 10-90% non condensing, humidity during storage 5-90% non condensing
- Surge protection: ± 6KV
- 1x InLine® PoE+ Gigabit Network Switch
- 1x user manual (German/English)
- 1x power cable
- 2x 19" mounting brackets
- 8x screws for the mounting brackets
- 4x rubber feet
The InLine® Gigabit Network Switch 5 Port (4x PoE+), 1xSFP, offers a fast network connection as well as PoE+ support on 4 of the 5 ports. The SFP port supports SFP modules with a bandwidth of 1.25 Gb/s. The 5x 10/100/1000Mb/s auto-negotiation RJ45 ports all support Auto MDI/MDIX.
The switch is an easy-to-use and powerful solution to upgrade your old network to a Gigabit network and to power PoE-enabled devices such as IP cameras, IP phones, access points, etc. via the connected patch cable.
- Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X, IEEE 802.3x Flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
- Ports: 4x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, PoE+ support 1x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X 1x 1000Base-X SFP port
- Three modes: Normal operation, VLAN port isolation (ports 1-4), range extension up to 250 metres via patch cable at 10 Mb/s (ports 3 and 4)
- PoE Type of power supply: Endspan
- PoE output voltage: Per port 52V DC
- PoE output power: Per port max. 30 watts
- Total power: 65 watts
- LED indicators: Power, mode, port (1-6)
- Dimensions (W x D x H): 20.2 x 12 x 4.5 cm
- Weight: approx. 616 g
- Power consumption: 100-240V AC, 50/60 Hz
- Ambient conditions: Operating temperature 0-40°C, storage temperature -20-70°C, humidity 20-95% non-condensing
Content of delivery:
- 1x InLine® PoE+ Gigabit Network switch
- 1x manual (German/English)
- 1x power cable
- 4x rubber feet
- Meets the standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x and IEEE802.3az
- EEE (Energy Efficient Ethernet): Reduced power consumption thanks to intelligent energy management
- Supports up to 16K MAC addresses
- Supports IEEE802.3x Flow control for full-duplex mode and back-pressure for half-duplex mode
- Supports jumbo frames
- LED indicators for monitoring power supply and link/activity< /ul>Technical data
- Chipset: RTL8382L+ 2x RTL8218D + 2x RTL8231
- Stan standards: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az
- 10Base-T: UTP cable Cat. 3, 4, 5 (max. 100m)
- EIA/TIA-568 100Ohm STP (max. 100m)
- 100Base-TX: UTP cable Cat. 5, 5e or higher (max. 100m)
- EIA/TIA-568 100Ohm STP (max. 100m)
- 1000Base-T: UTP cable Cat. 5e or higher (max. 100m)
- Number of ports: 24x 10/100/1000Mb/s auto-negotiation ports
- LED indicators: LINK/ ACT/SPEED (green), Power (red)
- Transmission method: Store-and-forward
- Switching capacity: 52Gb
- 10Mb/s: 14880pps
- 100Mb/s: 148800pps
- 1000Mb/s: 1488000pps
- Operating temperature: 0°C - 40°C
- Storage temperature: -10° C - 70°C
- Operating humidity: 10% - 90%, non-condensing
- Storage humidity: 5% - 90%, non-condensing
- Power supply: AC 100V~240V 50/60Hz (internal power supply) / power consumption: Max. 21 Watt
- incl. 19" bracket for rack mounting
- High-quality SFP transceiver module for a fast 2.5 gigabit data connection
- Optical LC duplex interface for single-mode fiber optics with 1310nm wavelength
- Digital diagnostic monitoring (DDM) for real-time performance control
- Hot-pluggable for easy installation and flexible replacement
- Operating temperature from 0 °C to 70 °C for reliable performance
The InLine® SFP module is a reliable solution for setting up and expanding network structures with a transmission rate of 2.5 Gb/s over single-mode fiber optics. With a range of up to 15 kilometers, it is ideal for use in corporate networks, data centers and backbone connections.
This module has an optical LC duplex interface and is fully compatible with standard SFP connectors, allowing easy integration into existing network infrastructures. Digital Diagnostic Monitoring (DDM) allows precise control of performance parameters in real time to ensure network security and efficiency.
Thanks to the hot-pluggable function, the module can be easily replaced or installed without affecting ongoing operations. The robust design ensures reliable performance at an operating temperature of 0 °C to 70 °C.
Technical specifications:
- Wavelength: 1310nm
- Optical interface: LC Duplex
- Transmission distance: 15 km (single-mode fiber optic)
- Digital diagnostics and monitoring (DDM)
- Operating voltage: +3.3 V
- Hot-pluggable design
- Operating temperature: 0 °C to 70 °C
- Storage temperature: -40 °C to 85 °C
- Connections: 1x 0.5m USB-C plug, 2x USB-C socket, 1x USB-C socket (DC/5V)
- Add. Power source: USB-C socket / USB-C to USB-A cable included
- Data: USB 3.2 Gen.2 (10Gb/s)
- Power: 100W
- Audio: Yes
- Connections: 3
- Interface: USB-C
- Integrated cable: USB-C plug, 50cm
- PC Video Type: USB-C (DP Alt Mode)
- Number of monitors supported: 1
- Daisy Chain: No
- LED displays: 2
- Housing: aluminum
- Color: Gray
- Dimensions (wxhxl): 15 x 57.5 x 66.5 mm
- Weight: of the product: 70.2g
- 1x USB-C switch
- 1x USB-C plug to USB-A plug cable 1m
- 2x USB-C plug/plug cable 1m
- 1x user manual
The switch provides protection against, for example, overload, overvoltage and overheating at each port. In addition, the switch offers IEEE 802.3af/at PoE+ on ports 5-16 with up to 32 watts of power and IEEE 802.3bt PoE++ on ports 1-4 with up to 60 watts of power via single Cat. 5e/6/6A/8.1 Ethernet cable with a PoE budget of 300W and a combined total power of 330W.
16x 10/100/1000MBit/s PoE ports solve the problem of a limited number of available power outlets, providing system administrators with a flexible solution to power almost anywhere the powering network device, such as PoE-enabled IP cameras or wireless Access Points (with heating also).
The switch menu can be password protected to prevent unauthorized access.
- Standards:
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX Gbit/s Ethernet over Fiber-Optic, IEEE 802.3x Full Duplex and flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3bt Power over Ethernet ++, IEEE 802.3az Energy Efficient Ethernet
- Ports: 16x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, 2x 1000Mb/s SFP
- PoE ports: 16 (PoE++ 1-4 / PoE+ 5-16)
- PoE budget 300W
- Total output: 330W
- LCD display: Real-time display of PoE operating status
- PoE output power: Port 1-4 max. 60W, port 5-16 max. 32W
- Network cable: Cat. 5e/6/6A/8.1 cable (≤ 100m)
- 1000Base-X: MMF, SMF
- MAC address table: 8K, automatic learning, automatic updates
- Jumbo Frame: 9216 Bytes
- Packet buffer: 4.1Mbit
- Transmission method: Store-and-forward
- Packet forwarding rate: 26.78 million packages per second
- Bandwidth: 36Gbit
- Number of fans: 3
- Dimensions: (W x D x H): 440x232x45mm
- Weight: approx. 3.2kg
- Mains input: 100~240V AC, 50/60Hz
- Environmental conditions:
Operating temperature -10-60°C, storage temperature -40-70°C, humidity in operation 10-90% non condensing, humidity during storage 5-90% non condensing
- Surge protection: ± 6KV
- 16-port gigabit switch for reliable network expansion with 1 Gb/s per port with auto-negotiation
- Plug & Play and Auto MDI/MDI-X crossover detection – Each individual port automatically detects the speed of the connected devices
- Green IT: Energy-saving thanks to IEEE 802.3az Energy Efficient Ethernet through cable length detection and automatic signal strength
- Store-and-forward switching to avoid corrupted packets
- Freightless 19" 1U housing for low noise operation
The InLine® 16-port Gigabit network switch is a powerful and uncomplicated solution for expanding existing network infrastructures. Each of the sixteen RJ45 ports automatically detects the speed of the connected devices (10/100/1000 Mb/s) and adapts flexibly in half or full duplex mode.
Thanks to Auto-MDI/MDI-X, the type of network cable used is irrelevant. The store-and-forward technology ensures efficient forwarding of data packets and prevents the transmission of faulty data. With IEEE 802.3az Energy Efficient Ethernet (EEE), cable lengths and network activities are detected to dynamically reduce energy consumption - ideal for sustainable IT environments.
The switch is designed to be fanless and therefore quiet in operation, perfect for office, laboratory or server rack environments. The 19-inch rack mounting in 1U enables easy integration into existing structures.
Technical specifications:
- 16x RJ45 ports, 10/100/1000Base-T, Auto-MDI/MDI-X
- Chipsätze: RTL8382L + RTL8218D + 2x RTL8231
- Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3az
- Store-and-forward switching
- MAC address table: 8K, auto-learning & auto-update
- Jumbo frame: 9216 bytes
- Bandwidth: 32 Gbit/s
- LED indicators: PWR, LNK/ACT
- Network cable: Cat. 5/5e or higher (up to 100 m)
- Dimensions: 480 x 180 x 44 mm
- Weight: approx. 2.15 kg
- Power supply: 100–240V AC, 50/60 Hz
- Max. Power consumption: 21 W
- Operating temperature: 0–40 °C
- Storage temperature: -40–70 °C
- Humidity: operation 10–90 %, storage 5–90 % (non-condensing)
Scope of delivery:
- 1x InLine® PoE+ Gigabit network injector hub 8 port
- 2x operating instructions (German/English)
- 1x power supply
- 2x 19" mounting bracket
- 6x screws for the mounting brackets
- 4x rubber feet
- High-performance SFP+ transceiver module for fast 10 Gigabit data connections over up to 10 km
- Compliant with IEEE 802.3ae, SFP MSA and SFF-8431 for smooth integration
- Single-mode LC duplex interface with 1310nm DFB laser for stable transmissions
- Digital diagnostic monitoring (DDM) function for real-time performance analysis
- Hot-pluggable for easy installation and quick replacement
The InLine® SFP+ module is a reliable and powerful solution for professional network environments. With a data rate of up to 10.3 Gb/s and a range of 10 kilometers over single-mode fiber, it is ideal for enterprise networks, data centers and backbone connections.
The module is fully compatible with the IEEE 802.3ae, SFP MSA and SFF-8431 industry standards and can be seamlessly integrated into existing network infrastructures. The LC duplex interface and 1310nm DFB laser technology ensure efficient and reliable signal transmission. Thanks to the integrated digital diagnostic monitoring (DDM), the module performance can be monitored in real time to ensure optimal network security and maintenance.
With an operating voltage of +3.3 V and a hot-pluggable design, the module can be easily installed and replaced without interrupting ongoing operations. Thanks to the extended temperature range of 0 °C to 70 °C, it is ideal for demanding network environments.
Technical specifications:
- Wavelength: 1310nm
- Extinction ratio ER: ≥ 3.5 dB
- Sensitivity of the receiver: ≤ 14.4 dBm
- I2C interface with digital diagnostics & monitoring
- Electrical interface according to SFF-8431
- Pin definitions: 1–10 in the BEZEL direction, 11–20 in the ASIC direction
- Storage temperature: -40 °C to 85 °C
- High-quality SFP transceiver module for a fast 2.5 gigabit data connection
- Optical LC duplex interface for multimode fiber optics with 850nm wavelength
- Digital diagnostic monitoring (DDM) for real-time performance control
- Hot-pluggable for easy installation and flexible replacement
- Operating temperature from 0 °C to 70 °C for reliable performance
The InLine® SFP module is a reliable solution for setting up and expanding network structures with a transmission rate of 2.5 Gb/s over multimode fiber optics. With a range of up to 300 meters, it is ideal for use in corporate networks, data centers and backbone connections.
This module has an optical LC duplex interface and is fully compatible with standard SFP connectors, allowing easy integration into existing network infrastructures. Digital Diagnostic Monitoring (DDM) allows precise control of performance parameters in real time to ensure network security and efficiency.
Thanks to the hot-pluggable function, the module can be easily replaced or installed without affecting ongoing operations. The robust design ensures reliable performance at an operating temperature of 0 °C to 70 °C.
Technical specifications:
- Wavelength: 850nm
- Optical interface: LC Duplex
- Transmission distance: 300 m (multimode fiber optics)
- Digital diagnostics and monitoring (DDM)
- Operating voltage: +3.3 V
- Hot-pluggable design
- Operating temperature: 0 °C to 70 °C
- Storage temperature: -40 °C to 85 °C
