InLine® Solar cable distributor set for photovoltaics
High-quality solar cables Y-splitters are used to distribute the cable paths to the corresponding solar modules.
- Cable with 4mm² cable cross-section according to type H1Z2Z2-K
- Nominal voltage 1500V DC, nominal current 30A
- Degree of protection IP68 when plugged in
- Temperature range -40°C to +85°C
- UV resistant
- Red version: solar plug (M) to 2x solar socket (F), black version: solar plug (F) to 2x solar plug (M)
- Solar plug Standard4/MC4/PV4 compatible
- Including dust protection caps
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
