InLine® USB PD power supply, GaN charger, 2-port, USB-C + USB-A, 30W, w/ display

This USB power supply from InLine combines state-of-the-art charging technology with a smart consumption indicator. Gain valuable insights into energy consumption while the charger supplies smartphones and other devices with power reliably, quickly and safely. The built-in digital display allows you to keep an eye on the current energy consumption in watts at all times and compare different devices with each other. By displaying the energy consumption, you can monitor the efficiency of your devices, adjust your charging habits and learn to use energy more consciously.

The USB power supply from InLine is equipped with state-of-the-art, environmentally friendly technology to ensure fast and efficient charging performance. With a high output power of 30 watts, you can charge several devices at the same time without sacrificing charging speed.

Gallium nitride (GaN) technology increases durability, reliability, charging efficiency and power density in a more compact and lightweight design. Due to the lower energy consumption during charging, the reduced material consumption during production and the smaller transport volume, the InLine power supply unit is particularly environmentally friendly.

The charger supports Power Delivery 3.0 on the USB-C port and Quick Charge 3.0 on the USB-A port. These fast charging technologies optimise charging performance and speed with minimal energy loss.

Intelligent charge detection adapts the charging speed to the device and the charge level. This shortens the charging time, protects the battery and increases its service life. The USB power supply is excellently insulated and has comprehensive protection against overvoltage, overheating and short circuits. The lightweight, compact design hardly weighs a thing when travelling and fits into any multiple socket strip. Thanks to its variety of connections and technologies, this power adapter can be used universally and is compatible with a wide range of devices, including iOS and Android devices. Enjoy the latest charging technology while keeping an eye on the energy consumption of your devices.

Technical characteristics

USB power adapter/charger
Input voltage: 100-240VAC, 0.85A
Input AC frequency: 50/60Hz
Output voltage/output current/output power:
- USB-C output:
- 5.0VDC/3.0A/15.0W - 9.0VDC/3.0A/27.0W - 12.0VDC/2.5A/30.0W
- USB-A output:
- 5.0VDC/3.0A/15.0W - 9.0VDC/2.0A/18.0W - 12.0VDC/1.5A/18.0W
- USB-A + USB-C output:
- 5.0VDC/3.4A/17.0W
Average operating efficiency:
- 83.78% (230V, 50Hz, USB-A 5.0V/3.0A)
- 87.77% (230V, 50Hz, USB-A 12.0V/1.5A)
- 84.33% (230V, 50Hz, USB-C 5.0V/3.0A)
- 88.73% (230V, 50Hz, USB-C 12.0V/2.5A)
- 85.56% (230V, 50Hz, USB-A 5.0V/1.7A + USB-C 5.0V/1.7A)
Efficiency at low load (10%):
- 78.68% (230V, 50Hz, USB-A 5.0V/3.0A)
- 75.71% (230V, 50Hz, USB-A 12.0V/1.5A)
- 78.75% (230V, 50Hz, USB-C 5.0V/3.0A)
- 82.21% (230V, 50Hz, USB-C, 12.0V/2.5A)
- 79.47% (230V, 50Hz, USB-A 5.0V/1.7A + USB-C 5.0V/1.7A)
Power consumption at no load: 0.09W
Total output power: max. 30.0W
Overvoltage and short circuit protection
If the power supply temperature is too high, it switches off automatically and automatically continues charging after it has cooled down
Dimensions: 81.8x39x33.5mm (LxWxH)
Weight: Approx. 60g

Item no.: 31550

InLine® USB power supply, charger, USB-A + USB-C, 33W, Power Delivery + Quick Charge

Reliable fast charging function for modern IT devices: thanks to USB Power Delivery 3.0 and Quick Charge 3.0
Parallel charging via USB-C and USB-A: Flexible charging options for a wide range of end devices
Maximum operational safety in a professional environment: The intelligent protection chip reliably prevents damage caused by overcurrent, overheating and overvoltage
Compact design with 33W total power: Ideal for use in IT environments or in service
High compatibility thanks to wide input voltage range: Perfect for international use

The InLine® Power Delivery USB power supply is the ideal solution for professional users who value reliable, fast and safe charging of their USB end devices. With an output of up to 33 W, the charger provides enough power to operate smartphones, tablets and other USB devices efficiently - even when used in parallel via USB-C and USB-A.

Support for current charging protocols such as USB Power Delivery 3.0 and Quick Charge 3.0 ensures that devices are optimally supplied with power - with minimal charging time. The integrated protection chip offers additional safety through overcurrent, overheating and overvoltage protection - a decisive advantage in sensitive working environments such as system houses, technical centers or maintenance areas.

The compact design saves space in service trolleys, technical cabinets or at the workplace. Thanks to the wide input voltage range (100-240 V), the power supply unit is also ideal for international use. With the InLine® USB power supply, you can rely on quality, safety and efficiency - whether in daily IT operations or in demanding project business.

PPS output: 3.3-11V / 3A (max. 33W)
USB-C+USB-A together: 5V / 3A (max. 15W)
Frequency: 50/60 Hz, 0.8 A
Output voltage: 5-20 V DC
Output current: max. 3.0 A
Power consumption at no load: 0.08 W
Efficiency at low load: 74.0%
Average efficiency during operation: 83.0%

InLine® USB PD power supply, GaN charger, 3-port, USB-C + USB-A, 65W, w/ display

This USB power supply from InLine combines state-of-the-art charging technology with a smart consumption indicator. Gain valuable insights into energy consumption while the charger supplies smartphones and other devices with power reliably, quickly and safely.

The built-in digital display allows you to keep an eye on the current energy consumption in watts at all times and compare different devices with each other. By displaying the energy consumption, you can monitor the efficiency of your devices, adjust your charging habits and learn to use energy more consciously.

The USB power supply from InLine is equipped with state-of-the-art, environmentally friendly technology to ensure fast and efficient charging performance. With a high output power of 65 watts, you can charge several devices at the same time without sacrificing charging speed. Gallium nitride (GaN) technology increases durability, reliability, charging efficiency and power density in a more compact and lightweight design. Due to the lower energy consumption during charging, the reduced material consumption during production and the smaller transport volume, the InLine power supply unit is particularly environmentally friendly.

The charger supports Power Delivery 3.0 on the USB-C ports and Quick Charge 3.0 on the USB-A port. These fast charging technologies optimise charging performance and speed with minimal energy loss. Intelligent charge detection adapts the charging speed to the device and the charge level. This shortens the charging time, protects the battery and increases its service life. The USB power supply is excellently insulated and has comprehensive protection against overvoltage, overheating and short circuits.

The lightweight, compact design hardly weighs a thing when travelling and fits into any multiple socket strip. Thanks to its variety of connections and technologies, this power adapter can be used universally and is compatible with a wide range of devices, including iOS and Android devices. Enjoy the latest charging technology while keeping an eye on the energy consumption of your devices.

Technical characteristics

USB power adapter/charger
Input voltage: 100-240VAC, 1.50A
Input AC frequency: 50/60Hz
Output voltage/output current/output power:
USB-C1/USB-C2 output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/3.25A/65.0W
USB-A output:
- 3.4-5.5VDC/5.0A/17.0-27.5W – 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 20.0VDC/3.0A/60.0W
USB-C1 + USB-C2 output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/2.25A/45.0W – 5.0VDC/3.0A/15.0W – 9.0VDC/2.22A/20.0W – 12.0VDC/1.66A/20.0W
USB-C1 + USB-A output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/2.25A/45.0W – 5.0VDC/3.0A/15.0W – 9.0VDC/2.0A/18.0W – 12.0VDC/1.5A/18.0W
USB-C2 + USB-A output:
- 5.0VDC/4.8A/24.0W
USBC1+ (USB-C2+USB-A) output:
- 5.0VDC/3.0A/15.0W – 9.0VDC/3.0A/27.0W – 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/2.25A/45.0W – 5.0VDC/1.5A/7.5W
Average operating efficiency:
- 89.98% (230V, 50 Hz, USB-C1+USB-C2 20.0V/2.25A + 12.0V/1.66A)
- 90.02% (230V, 50 Hz, USB-C1+USB-C2+USB-A 20.0V/2.25A + 5.0V/1.5A + 5.0V/1.5A)
- 84.31% (230V, 50 Hz, USB-C1+USB-C2+USB-A 5.0V/3.0A + 5.0V/1.5A + 5.0V/1.5A)
Efficiency at low load (10%):
- 85.25% (230V, 50Hz, USB-C1+USB-C2 20.0V/2.25A + 12.0V/1.66A)
- 81.42% (230V, 50Hz, USB-C1+USB-C2+USB-A 20.0V/2.25A + 5.0V/1.5A + 5.0V/1.5A)
- 71.48% (230V, 50Hz, USB-C1+USB-C2+USB-A 5.0V/3.0A + 5.0V/1.5A + 5.0V/1.5A)
Power consumption at no load: 0.28W
Total output power: max. 65.0W
Overvoltage and short circuit protection
If the power supply temperature is too high, it switches off automatically and automatically continues charging after it has cooled down
Dimensions: 94.4x52x35.3mm (LxWxH)
Weight: Approx. 117g

Item no.: 31552

InLine® USB Power Adapter Single, 100-240V to 5V/1.2A

The InLine® USB Power Adapter makes it possible to tap the USB voltage directly from the socket. This makes the adapter ideal for use as a USB power adapter or charger for e.g. iPhone, iPad, iPod Mini/Shuffle, smartphones, eBook readers etc.

Input voltage: 100-240V AC
Input alternating current frequency: 50/60Hz, 0.5 A
Output voltage: 5.0 V DC
Output current: max. 1.2 A
Output power: 6.0 W
Average efficiency in operation: 76.66%
Power consumption at no load: 0.09 W
1x USB A socket
Incl. overheating protection, overvoltage protection, short-circuit protection, overcurrent protection

InLine® USB PD power supply, GaN charger, 1-port, USB-C, 45W, with display

This USB power supply from InLine combines state-of-the-art charging technology with a smart consumption indicator. Gain valuable insights into energy consumption while the charger supplies smartphones and other devices with power reliably, quickly and safely.

The built-in digital display allows you to keep an eye on the current energy consumption in watts at all times and compare different devices with each other. By displaying the energy consumption, you can monitor the efficiency of your devices, adjust your charging habits and learn to use energy more consciously.

The USB power supply from InLine is equipped with state-of-the-art, environmentally friendly technology to ensure fast and efficient charging performance. With a high output power of 45 watts, you can charge your device without sacrificing charging speed. Gallium nitride (GaN) technology increases durability, reliability, charging efficiency and power density in a more compact and lightweight design. Due to the lower energy consumption during charging, the reduced material consumption during production and the smaller transport volume, the InLine power supply unit is particularly environmentally friendly.

The charger supports Power Delivery 3.0, a fast charging technology that optimises charging performance and speed while minimising energy loss. Intelligent charge detection adapts the charging speed to the device and the charge level. This shortens the charging time, protects the battery and increases its service life. The USB power supply is excellently insulated and has comprehensive protection against overvoltage, overheating and short circuits.

The lightweight, compact design hardly weighs a thing when travelling and fits into any multiple socket strip. Thanks to its technological versatility, this power supply is universally applicable and compatible with a wide range of devices, including iOS and Android devices. Enjoy the latest charging technology while keeping an eye on the energy consumption of your devices.

Technical characteristics

USB power adapter/charger
Input voltage: 100-240VAC, 1.0A
Input AC frequency: 50/60Hz
Output voltage/output current/output power:
- 5.0VDC/3.0A/15.0W - 9.0VDC/3.0A/27.0W - 12.0VDC/3.0A/36.0W – 15.0VDC/3.0A/45.0W – 20.0VDC/2.25A/45.0W
Average operating efficiency:
- 83.87% (230V, 50Hz, 5.0V/3.0A)
- 88.70% (230V, 50Hz, 20.0V/2.25A)
Efficiency at low load (10%):
- 78.01% (230V, 50Hz, 5.0V/3.0A)
- 80.91% (230V, 50Hz, 20.0V/2.25A)
Power consumption at no load: 0.09W
Total output power: max. 45.0W
Overvoltage and short circuit protection
If the power supply temperature is too high, it switches off automatically and automatically continues charging after it has cooled down
Dimensions: 81.8x39x33.5mm (LxWxH)
Weight: Approx. 96g

Item no.: 31551

InLine® USB PD power supply, GaN charger, 5-port, USB-C + USB-A, 140W, w/display

This USB power supply from InLine combines state-of-the-art charging technology with a smart consumption indicator. Gain valuable insights into energy consumption while the charger supplies smartphones and other devices with power reliably, quickly and safely.

The built-in digital display allows you to keep an eye on the current energy consumption in watts at all times and compare different devices with each other. By displaying the energy consumption, you can monitor the efficiency of your devices, adjust your charging habits and learn to use energy more consciously.

The USB power supply from InLine is equipped with state-of-the-art, environmentally friendly technology to ensure fast and efficient charging performance. With a high output power of 140 watts, you can charge several devices at the same time without sacrificing charging speed. Gallium nitride (GaN) technology increases durability, reliability, charging efficiency and power density in a more compact and lightweight design. Thanks to the lower energy consumption during charging, the reduced material consumption during production and the smaller transport volume, the InLine power supply unit is particularly environmentally friendly.

The charger supports Power Delivery 3.0 on the USB-C ports and Quick Charge 3.0 on the USB-A port. These fast charging technologies optimise charging performance and speed with minimal energy loss. The intelligent charging detection adapts the charging speed to the device and the charge level. This shortens the charging time, protects the battery and increases its service life. The USB power supply is excellently insulated and has comprehensive protection against overvoltage, overheating and short circuits.

The lightweight, compact design hardly weighs a thing when travelling and fits into any multiple socket strip. Thanks to its variety of connections and technologies, this power adapter can be used universally and is compatible with a wide range of devices, including iOS and Android devices. Enjoy the latest charging technology while keeping an eye on the energy consumption of your devices.

Technical characteristics

USB power adapter/charger
Input voltage: 100-240VAC, 2.50A
Input AC frequency: 50/60Hz
Output voltage/output current/output power:
USB-C1/USB-C2/USB-C3 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 5.0 A / 100.0 W
USB-A1/USB-A2 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 5.0 A / 100.0 W
USB-A1 + USB-A2 output:
- max. 24.0 W (12.0 W + 12.0 W)
USB-C1/USB-C2 + USB-C2/USB-C3 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 4.75 A / 95.0 W + 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V / 2.25 A / 45.0 W
USB-C1/USB-C2/USB-C3 + USB-A1/USB-A2 output:
- max. 136.0 W (100.0 W + 36.0 W)
USB-C1/USB-C2/USB-C3 + USB-A1 + USB-A2 output:
- max. 124.0 W (100.0 W + 12.0 W + 12.0 W)
USB-C1 + USB-C2 + USB-C3 output:
- max. 140.0 W (65.0 W + 45.0 W + 30.0 W)
USB-C1/USB-C2 + USB-C2/USB-C3 + USB-A1/USB-A2 output:
- max. 135.0 W (65.0 W + 45.0 W + 25.0 W)
USB-C1/USB-C2 + USBC-2/USB-C3 + USB-A1 + USB-A2 output :
- max. 134.0 W (65.0 W + 45.0 W + 12.0 W + 12.0 W)
USB-C1 + USB-C2 + USB-C3 + USB-A1/USB-A2 output:
- max. 140.0 W (65.0 W + 30.0 W + 20.0 W + 25.0 W)
USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 output:
- 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 3.0 A / 36.0 W - 15.0 V DC / 3.0 A / 45.0 W - 20.0 V DC / 3.25 A / 65.0 W + 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 3.0 A / 27.0 W - 12.0 V DC / 2.5 A / 30.0 W - 15.0 V DC / 2.0 A / 30.0 W - 20.0 V / 1.5 A / 30.0 W + 5.0 V DC / 3.0 A / 15.0 W - 9.0 V DC / 2.22 A / 20.0 W - 12.0 V DC / 1.67 A / 20.0 W - 15.0 V DC / 1.33 A / 20.0 W + 5.0 V DC / 2.4 A / 12.0 W + 5.0 V DC / 2.4 A / 12.0 W
Average operating efficiency:
- 86,22 % (230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 5.0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
- 90,04 % (230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 20,0 V / 3.25 A + 20.0 V / 1.5 A + 15.0 V / 1.33 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
Efficiency at low load (10%):
- 79,39 % (230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 5,0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.0 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
- 85,54 % ( 230 V, 50 Hz, USB-C1 + USB-C2 + USB-C3 + USB-A1 + USB-A2 20,0 V / 3.25 A + 20.0 V / 1.5 A + 15.0 V / 1.33 A + 5.0 V / 2.4 A + 5.0 V / 2.4 A)
Power consumption at no load: 0.22W
Total output power max. 140.0W
Overvoltage and short circuit protection
If the power supply temperature is too high, it switches off automatically and automatically continues charging after it has cooled down
Dimensions power adapter: 80x31x85 mm (LxWxH)
Dimensions stand: 60x60x32.5 mm (LxWxH)
Weight: approx. 349g

Item no.: 31553

InLine® USB GaN Charger Single USB-C, Power Delivery, PPS, 33W

Compact and powerful GaN USB-C charger with up to 33 W total power, Power Delivery 3.0 and Programmable Power Supply (PPS).

Input voltage: 100-240VAC, 50/60Hz
Surge and short circuit protection
If the temperature of the power supply unit is too high, it switches off automatically and continues charging after cooling down
USB-C output voltage (PD3.0): DC 5.0 V / 3.0 A - 9.0 V / 3.0 A - 12.0 V / 2.5 A - 15.0 V / 2.0 A - 20.0 V / 1.5 A (max. 30.0 W)
USB-C output voltage (PPS): DC 3.3-11.0 V / 3.0 A - 3.3-16.0 V / 2.0 A (max. 33.0 W)
Average active effiency: 85.11 % (230 V, 50 Hz, 5,0 V, 3,0 A), 90,95 % (230 V, 50 Hz, 20,0 V, 1,5 A)
Efficiency at low load (10 %): 82.22 % (230 V, 50 Hz, 5.0 V, 3.0 A), 84.31 % (230 V, 50 Hz, 20.0 V, 1.5 A)
No-load power consumption: 0.05 W (230 V, 50 Hz, 5.0 V, 3.0 A), 0.06 W (230 V, 50 Hz, 20.0 V, 1.5 A)
Dimensions: 70x31x31 mm (LxHxW)
Weight: approx. 51 g

InLine® USB power supply charger Dual USB-C, PD, PPS, 30W

The ultra-compact InLine® USB power supply charger with GaN semiconductor technology offers fast and safe charging via two USB-C ports. Thanks to Power Delivery (PD) and Programmable Power Supply (PPS) technology, maximum efficiency is achieved. With an output of 30W, your devices are recharged in no time at all. Ideal for smartphones, tablets and other USB-C devices - perfect for at home, in the office or on the go.

USB power adapter/charger
Input voltage: 100-240VAC, 0.85 A
Input AC frequency: 50/60Hz
Output voltage/output current/output power:
- USB-C1/C2 output: DC 5.0V/3.0A/15.0W - 9.0V/3.0A/27.0W - 12.0V/2.5A/30.0W - 15.0V/2.0A/30.0W - 20.0V/1.5A/30.0W
- PPS USB-C output: DC 5. 0-11.0V/2.7A/29.7W - 5.0-16.0V/1.85A/29. 6W
- USB-C + USB-C output when used together: DC 5.0V/3.0A/15.0W
Average operating efficiency: 84.77% (230V, 50Hz, USB-C1+USB-C2: 5. 0VDC/1.5A+5.0VDC/1.5A)
Efficiency at low load (10%): 80.20% (230V, 50Hz, USB-C1+USB-C2: 5.0VDC/1.5A+5.0VDC/1. 5A)
Power consumption at no load: 0.068 W
Total output power: max. 30.0 W
Overvoltage and overcurrent protection, as well as short-circuit protection
If the temperature of the power supply unit is too high, it switches off automatically and continues charging automatically after cooling down
Dimensions: 82x38x16 mm (LxWxH)

InLine® USB Power Adapter Single, 100-240V to 5V/2.5A

InLine® USB Power Adapter Single is suitable for charging smartphones and tablets with up to 2.5A charge current.

Compact power adapter CEE 7/16 Europlug
Output: 1x USB connector 5V DC / max. 2.5A
Input: 100-240V AC / 50-60Hz
Intelligent electronics with integrated protection circuits

InLine® USB PD power supply, GaN charger, 3-port, Dual USB-C + USB-A, 65W

Input voltage: AC 100-240V
Input AC frequency: 50/60 Hz, 1.5 A
Output voltage: 3.3-20.0 V DC
Output current: max. 5.0 A
Output power: 65.0 W
Average active efficiency: 86.67 %
Efficiency at low load (10%): 76.64 %
No-load power consumption: 0.27 W
USB-C1/C2 output: 3.3-11.0V / 3.0A or 5.0V/3.0A or 9.0V/3.0A or 12.0V/3.0A or 15.0V/3.0A or 20.0V/3.25A (65.0W max)
USB-A output: 4.5V/5.0A or 5.0V/4.5A or 9.0V/3.0A or 12.0V/2.5A or 20.0V/1.5A (30.0W max)
USB-C1+USB-C2 output: 45.0W + 18.0W (63.0W max)
USB-C1+USB-A output: 45.0W + 18.0W (63.0W max)
USB-C2+USB-A output: 5.0V/3.0A (15.0W max)
USB-C1+USB-C2+USB-A output: 45.0W + 5.0V/3.0A
USB PD 3.0 compatible, Quickcharge 4+ and backwards compatible
Dimensions: 95.7x47.2x29.4mm

InLine® USB Power Adapter DUO, 2 Port 100-240VAC to 5V / 2.1A

The InLine® USB Power Adapter allows you to adapt the USB power directly from the wall socket, so you can for example use the adapter as a power source for USB mobile phone charger. Ideal suitable as USB AC Adapter / Charger for iPhone, iPad, iPod / Mini / Shuffle, smartphones, etc.

Input voltage: 100-240V AC
Input AC frequency: ~50/60 Hz, 0.5 A
Output voltage: 5.0 V DC
Output current: max. 2.1 A
Output power: 10.5 W
Average active efficiency: 82.11 %
No-load power consumption: 0.09 W
2x USB A Female
Current: max. 2.1A, when using two ports at the same time, the max. current distributed on both ports.

InLine® USB PD power supply, GaN charger, Single USB-C, Power Delivery, 65W

Experience the powerful and compact 65W GaN charger with 1x USB-C port - the perfect solution for fast and efficient charging! Thanks to GaN (Gallium Nitride) technology, this power supply is highly efficient and enables better performance in a smaller form factor. Electrons are conducted up to 1,000x more efficiently than conventional silicon semiconductors, resulting in lower heat generation and less power loss. The 65W GaN charger is USB PD 3.0 compatible with PPS and offers multiple output options. PPS (Programmable Power Supply) allows the current and voltage delivered through the USB-C port to be dynamically adjusted, meaning the power supply can flexibly respond to the requirements of the connected device and deliver the optimal performance.

Input voltage: AC 100-240V
Input AC frequency: 50/60 Hz, 1.5 A
Output voltage: 3.3-20.0 V DC
Output current: max. 4.05 A
Output power: 65.0 W
Average active efficiency: 86.49 %
Efficiency at low load (10%): 79.58 %
No-load power consumption: 0.03 W
USB-C PD output: 5.0V / 3.0A or 9.0V / 3.0A or 12.0V / 3.0A or 15.0V / 3.0A or 20.0V / 3.25A (max. 65.0W) / PPS output: 3.3-11.0V / 4.05A or 3.3-16.0V / 3.0A (max. 48.0W)
USB PD 3.0 compatible
Dimensions: 83.3x46x28.4mm

Item no.: 31506D

InLine® USB PD Charger Single USB-C, Power Delivery, 20W

The InLine® USB power supply is a fast charging power supply for compatible USB devices, e.g. compatible with the iPhone. Conventional end devices can also be charged with this power supply, but they take longer to be fully recharged.

USB power supply/charger
USB Type-C PD output: 5VDC/3A - 9VDC/2.22A - 12VDC/1.5A, Power Delivery 3.0 compatible (max. 20W)
Input voltage: 100-240V AC
Input AC frequency: ~50/60 Hz, 0 .5 A
Output voltage: 5.0-20.0 V DC
Output current: max. 3.0 A
Output power: 20.0 W< /li>
Average efficiency in operation: 89.7% (12V / 1.67A), 85.6% (5V / 3A)
Efficiency at light load (10% ): 79.6% (12V / 1.67A), 80.0% (5V / 3A)
No load power consumption: 0.02W
Over voltage - and short-circuit protection
If the temperature of the power supply unit is too high, it switches off automatically and automatically resumes charging after it has cooled down

InLine® USB PD power supply, GaN charger, 3-port, Dual USB-C + USB-A, 65W, white

Experience the powerful and compact 65W GaN charger with 2x USB-C port and 1x USB-A port - the perfect solution for fast and efficient charging of multiple devices at the same time! Thanks to GaN (gallium nitride) technology, this power supply is highly efficient and enables better performance in a smaller design. Electrons are conducted up to 1,000 times more efficiently than with conventional silicon semiconductors, resulting in less heat generation and less energy loss. The 65W GaN charger also supports Power Delivery 3.0 with PPS and Quickcharge 3.0 and offers various output options. PPS (Programmable Power Supply) makes it possible to dynamically adjust the current and voltage supplied via the USB-C port, meaning the power supply can respond flexibly to the requirements of the connected device and deliver the optimum power.
The InLine® USB PD power supply unit is ideal for use in multiple sockets, as the design means that no other protective contact sockets are blocked!

General information

Input voltage: AC 100-240V
Input alternating current frequency: ~50/60 Hz, 1.5 A
Output voltage: 3.3-20.0 V DC
Output current: max. 5.0 A
Output power: 65.0 W
Power Delivery 3.0
Quick Charge 3.0
Dimensions: Diameter 42mm, length 102mm

Behaviour of the USB ports when used at the same time:

USB-C1: DC 5.0V/3.0A, 9.0V/3.0A, 12.0V/3.0A, 15.0V/3.0A, 20.0V/3.25A, PPS 3.0A (65.0W)
USB-C2: DC 5.0V/3.0A, 9.0V/3.0A, 12.0V/2.5A, 20.0V/1.5A, PPS 3.0A (30.0W)
USB-A: DC 5.0V/4.5A (22.5W), 4.5V/5.0A (22.5W), 9.0V/3.0A, 12.0V/2.5A, 20.0V/1.5A (30.0W)
USB PD 3.0 (USB-C1, C2) compatible, Quickcharge (USB-A) 4+ and backwards compatible
C1+C2 = 45.0W + 18.0W = 63.0W
C1+A = 45.0W + 18.0W = 63.0W
C2+A = 7.5W + 7.5W = 15.0W
C1+C2+A = 45.0W + 7.5W + 7.5W = 60.0W

Average efficiency in operation:

82.31 % (USB-C1 + USB-C2 + USB-A = 3.3VDC + 5.0VDC + 5.0VDC)
87.48 % (USB-C1 + USB-C2 + USB-A = 20.0VDC + 5.0VDC + 5.0VDC)
90.94 % (USB-C1 + USB-C2 = 20.0VDC + 12.0VDC)

Efficiency at low load (10%):

76.61 % (USB-C1 + USB-C2 + USB-A = 3.3VDC + 5.0VDC + 5.0VDC)
81.59 % (USB-C1 + USB-C2 + USB-A = 20.0VDC + 5.0VDC + 5.0VDC)
81.18 % (USB-C1 + USB-C2 = 20.0VDC + 12.0VDC)

Power consumption at no load: 0.107 W

Item no.: 31506G

InLine® Qi powerstation multiport, power supply, wireless charging

The InLine® Qi powerstation multiport is a fast-charging power supply for up to six PD/QC compatible USB end devices and another via wireless charging, that can be charged simultaneously, e.g. compatible with the iPhone, iPad and other mobile devices. Conventional end devices can also be charged with this power supply, but take longer to fully recharge.

6-port USB type C / type A power supply / charger, desktop version
Power supply based on GaN technology: more power with smaller dimensions
USB-C PD output 1 and 2: 5.0VDC/3.0A – 9.0VDC/3.0A – 12.0VDC/3.0A – 15.0VDC/3.0A – 20.0VDC/5.0A (100.0W max.)
USB-C PD output 3 and 4: 5.0VDC/3.0A – 9.0VDC/3.0A – 12.0VDC/2.5A – 15.0VDC/2.0A – 20.0VDC/1.5A (30.0W max.)
USB-A QC output 1 and 2: 5.0VDC/3.0A – 9.0VDC/3.0A – 12.0VDC/2.5A – 20.0VDC/1.5A (30.0W max.)
Power Delivery 2.0, 3.0 and Quick Charge 2.0, 3.0 compatible
Output power wireless charging: 5.0W / 7.5W / 15.0W
Max. total output power: 100.0W
Overvoltage and short-circuit protection
Temperature protection: If the temperature of the power supply is too high, it switches off automatically and resumes charging automatically after cooling
Input voltage: 100-240V AC
Input AC frequency: ~50/60 Hz, 2,5 A
Output voltage: 5.0-20.0 V DC
Output current: max. 5.0 A
Output power: 100.0 W
Average active efficiency: 83.30 % (USB-C 5.0V/3.0A), 84,54% (USB-C 12.0V/1.5A), 82,05 % (USB-A 5.0V/3.0A), 83,02 % (USB-A 12.0V/1.5A)
No-load power consumption: 0.07 W
Dimensions (LxWxH): approx. 120x85x29mm
Weight: approx. 310g
Incl. power cable, 1.8m

GaN (Gallium Nitride) Power Supplies – Faster, smaller, better!
GaN power supplies are highly efficient chargers with more power in a smaller footprint.

Electrons are conducted up to 1,000 times more efficiently than in silicon semiconductors
Lower heat generation during power transmission = less energy loss
Fewer components required = smaller design with more ports

br>Status LED

In standby mode, the LED lights up orange
When a device is charging via wireless charging, the LED flashes slowly in blue
When a foreign object is detected on the wireless charging area, the LED flashes quickly in blue

Item no.: 31517K

InLine® Multiport power supply, 6x USB-C, GaN, 120W, PD 3.0, black

Maximum charging efficiency with up to 120 W total power: Supplies up to six USB-C devices simultaneously with Power Delivery 3.0 – ideal for modern IT infrastructures.
Space-saving GaN technology: Compact, efficient, and powerful – perfect for professional continuous use with minimal heat generation.
Safe charging thanks to multiple protection: Overvoltage, short-circuit, and temperature protection ensure uninterrupted operation.
Future-proof charging infrastructure: USB-C-PD 3.0 and QC 4+ support current and future devices – for long-term flexibility.

The InLine® multiport power supply is the professional solution for centralized power supply in modern workplaces and IT infrastructures. With a total of six USB-C ports and a combined output power of up to 120 W, it enables the simultaneous operation of multiple devices such as smartphones, tablets, or notebooks – ideal for offices, conference rooms, or training environments. The integrated Power Delivery 3.0 technology ensures fast and efficient charging, while Quick Charge 4+ guarantees additional compatibility with current end devices.

Thanks to its compact GaN design, the power supply impresses with its small dimensions, low heat generation, and maximum efficiency. It is suitable both as a desktop charging station and for permanent wall mounting, offering maximum flexibility in use. Integrated protection mechanisms against overvoltage, short circuit, and overheating make it particularly reliable in continuous operation.

With an input voltage range of 100–240 V, the device can be used internationally—a corresponding country adapter is required for use outside Europe. The multiport charger impresses with its performance, safety, and versatility, especially in project business, IT rollouts, or professional mobility solutions.

USB-C PD outputs: 5VDC/3A, 9VDC/3A, 12VDC/3A, 15VDC/3A, 20VDC/5A
Compatibility: Power Delivery 3.0, Quick Charge 4+
Total power: max. 120 W
Input: 100–240 V AC / 2.3 A, 50/60 Hz
Dimensions: approx. 200 × 66 × 22 mm
Includes power cable, 1.5 m

Item no.: 31516I

InLine® USB power supply, GaN charger, 2x USB-C, 1x USB-A, PD 3.0, safety socket

Experience the powerful and compact 65W GaN charger with 2x USB-C port, 1x USB-A port, 1x safety socket and 1.5m connection cable - the perfect solution for fast and efficient charging of multiple devices at the same time! Thanks to GaN (Gallium Nitride) technology, this power supply is highly efficient and allows for better performance while maintaining a smaller size. Electrons are conducted up to 1.000x more efficiently than traditional silicon semiconductors, resulting in less heat build-up and energy loss. The 65W GaN charger also supports Power Delivery 3.0 on the USB-C ports and Quickcharge 4+ on the USB-A port, and offers multiple output options.

2x PD USB-C / 1x QC USB-A charger, earthing contact socket
USB-C PD output 1: 5VDC/3A(15W) - 9VDC/3A(27W) - 12VDC/3A(36W) - 15VDC/3A(45W) - 20VDC/3,25A (max. 65W), PPS: 3,3-11VDC/5A (max. 55W)
USB-C PD output 2: 5VDC/3A(15W) - 9VDC/3A(27W) - 12VDC/2.5A(30W) - 15VDC/2A(30W) - 20VDC/1.5A (max. 30W)
USB-A QC output: 5VDC/4.5A(22.5W) - 4.5VDC/3A(22.5W) - 9VDC/3A(27W) - 12VDC/2.5A(30W) - 20VDC/1.5A (max. 30W)
Ground socket: 230V AC 50/60Hz, 16 A max., 3680 W max.
Power Delivery 2.0, 3.0 and Quick Charge 2.0, 3.0, 4.0, 4.0+ compatible
Input voltage: 220-250V AC
Input AC frequency: ~50/60 Hz, 16 A max.
USB output voltage: 3.3-20.0V DC
USB output current: 5.0 A max.
USB output power: 65.0 W
Power consumption at no load: 0.18 W
Overvoltage and short circuit protection
Thermal protection: if the temperature of the power supply is too high, it switches off automatically and resumes charging automatically after cooling down
Dimensions (LxWxH): approx. 107x48x40mm
Weight: approx. 400g
Length of connection cable: 1.5m

Item no.: 31518I

InLine® USB power supply, GaN charger, 4-port, dual USB-C + dual USB-A, 120W

The InLine® GaN charger provides you with four powerful connections in a compact and efficient housing. Two USB-C and two USB-A ports deliver a total output of up to 120 W and enable simultaneous charging of smartphones, tablets, laptops or accessories.

Thanks to modern GaN (gallium nitride) technology, the power supply is significantly more efficient than conventional silicon models. This means less heat generation, lower energy losses and a considerably smaller design. Ideal for professional applications in offices, conference rooms or mobile service use.

Both Power Delivery 3.0 and QuickCharge 4+ are supported, allowing even power-hungry devices to be charged reliably and quickly. Intelligent power distribution ensures that connected devices are always optimally supplied – even when several ports are in use at the same time.

The charger can be positioned flexibly: standing with the stand or lying flat thanks to the included rubber feet. This is particularly practical when space is limited but maximum performance is required.

	Total power	USB-C 1	USB-C 2	USB-A 1	USB-A 2
Single output	100 W	100 W
2 outputs	120 W	60 W	60 W
3 outputs	100 W	45 W	45 W	10 W
4 outputs	100 W	30 W	30 W	18 W	18 W

Input voltage: AC 100–240 V
Output voltage: 5.0–20.0 V DC
Output current: max. 5.0 A
Output power: 120.0 W
Dimensions: 98 × 110 × 20 mm
Data at 230V 50Hz (USB-C + USB-A = 20.0V / 5.0A + 12.0V / 1.67A):
Average efficiency during operation: 90.55%
Efficiency at low load (10%): 83.45%
Power consumption at zero load: 0.284 W
Input AC frequency: 50/60 Hz, 2.3 A

InLine® 5-Port USB-C PowerHub, charger extension, 100W, black

Extension for powerful chargers: The InLine® PowerHub distributes up to 100 watts of total power across five USB-C ports – ideal for system workstations with high energy requirements.
Compact design for maximum flexibility: Measuring just 91 × 36.5 × 23.2 mm, the PowerHub is perfect for mobile use, e.g. at trade fairs or in mobile service units.
Reliable power distribution thanks to Power Delivery 3.1: The intelligent charging technology detects the requirements of the connected devices and supplies them efficiently and in a battery-friendly manner.
Flexible application options thanks to USB-C input: Works with USB-C ports from USB 3.2 Gen2 specification or correspondingly powerful power supplies – ideal for modular workstation solutions.
Integrated wall mounting option: The practical hanging hole allows secure and space-saving attachment to walls or furniture.

The InLine® 5-Port USB-C PowerHub is the intelligent answer to modern power requirements in professional environments. Especially in workplaces, training rooms or for mobile use, it is crucial to charge multiple devices efficiently and safely at the same time. The PowerHub expands powerful USB-C power supplies or ports (from USB 3.2 Gen2) with five full-featured USB-C outputs. The maximum available total power of 100 watts is dynamically distributed to the connected devices.

Thanks to Power Delivery 3.1, the power supply is not only particularly fast, but also battery-friendly and safe – protection mechanisms against overvoltage and short circuits are integrated. Its compact dimensions and low weight make the PowerHub the ideal companion for on-site installations or mobile technical environments. It also creates order and structure at permanently installed workstations thanks to its integrated mounting hole. The PowerHub comes with a high-quality 1.2-metre USB 3.2 Gen2 cable.

A power supply unit is not included in the scope of delivery – we recommend using a powerful USB-C power supply unit or USB-C port that provides the required power. Suitable power supply units and cables can be found under accessories.

Input: USB-C (PD3.1/PD3.0) 20 V / 5 A (100 W)
Output: 5× USB-C (PD3.0) 15 V / 1.2 A (20 W per port)
Dimensions: 91 × 36.5 × 23.2 mm
Colour: Black
Scope of delivery: PowerHub, USB 3.2 Gen2 cable (1.2 m)

Item no.: 31515D

InLine® USB Travel Power Adapter Charger Dual USB-C, PD, PPS, 65W

High charging power for professional devices: Supports Power Delivery (PD) and PPS with up to 65 W - ideal for notebooks, tablets and smartphones.
Dual USB-C outputs for parallel charging: Power two devices simultaneously - ideal for office, warehouse or service applications.
Worldwide use with travel adapter: Includes adapters for EU, UK, AU and integrated US plug - perfect for international projects.
Flat design for confined socket situations: Fits easily behind furniture, in power strips or hard-to-reach wall sockets.
Safe and energy-efficient power supply: Protection against overheating, short circuits and overvoltage with over 86% energy efficiency.

The InLine® USB power supply charger with dual USB-C outputs was developed for professional use and impresses with its high charging power and maximum flexibility. It offers up to 65 W of power distributed over two USB-C outputs, which are ideal for charging smartphones, tablets and notebooks simultaneously. Support for the modern fast charging protocols Power Delivery (PD) and PPS ensures shorter charging times and maximum efficiency.

International usability is ensured by the included adapters for EU, UK and AU as well as the integrated US plug - a great advantage for business trips, trade fairs or international project work.

An exemplary list of supported countries:

AU Plug type I, valid for the following countries: Australia, New Zealand, Papua New Guinea, China (partially), Argentina, Uruguay
UK Plug type G (Commonwealth plug), valid for the following countries: United Kingdom, Ireland, Singapore, Malaysia, Bahrain, Botswana, Brunei, Gambia, Ghana, Gibraltar, Hong Kong, Iraq, Jordan, Qatar, Kenya, Kuwait, Macau, Malta, Mauritius, Nigeria, Oman, Saudi Arabia, Seychelles, Tanzania, Uganda, United Arab Emirates, Cyprus
EU Plug type C (‘Euro plug’ CEE 7/16), valid for most European countries.
US Plug type A, applies to the following countries: USA, Canada, Japan, China (partially), Philippines (partially), Taiwan

Particularly noteworthy is the flat and compact design, which enables use even in cramped socket situations such as behind desks, sofas or panels.

With a wide voltage range (100-240 V) and comprehensive protection mechanisms against short circuits, overheating and overvoltage, the power supply fulfils the highest safety standards. The automatic continuation of the charging process after the temperature has been switched off emphasises the practical suitability for continuous professional operation.

Input voltage: 100-240VAC, 1.5 A
Input AC frequency: 50/60Hz
Output voltage/output current/output power: USB-C1/C2 output: DC 5.0V/3.0A/15.0W - 9.0V/3.0A/27.0W - 12.0V/3.0A/36.0W - 15.0V/3.0A/45.0W - 20.0V/3.25A/65.0W PPS: 5.0-11.0V/4.05A/44.55W USB-C1 + USB-C2 output: 12.0W+45.0W USB-C1 5.0V/2.4A/12.0W USB-C2 5.0V/2.4A/12.0W - 9.0V/3.0A/27.0W - 12.0V/2.5A/30.0W - 15.0V/2.0A/30.0W - 20.0V/2.25A/45.0W
Average operating efficiency: 86.30% (230V, 50Hz, USB-C1 (5.0V/2.4A); USB-C2 (20.0V/2.25A))
Low load efficiency (10%): 77.47% (230 V, 50 Hz, USB-C1 (5.0V/2.4A); USB-C2 (20.0V/2.25A))
Power consumption at no load: 0.09 W
Total output power: max. 65.0 W
Dimensions: 85.6 x 46.1 x 15 mm (LxWxH)