InLine® Cable Splitter HDMI 2-port, 4K/60Hz, with USB power cable, 0.5m
This InLine® HDMI splitter 2-fold, 4k/60Hz splits an HDMI input signal to two HDMI output devices. The video and audio signal is duplicated and can be output simultaneously on both playback devices. If two or more HDMI splitters are cascaded, they can produce a larger distribution and length. The HDMI splitter is ideal for retail TV and showrooms, set-top boxes, Blu-ray players and projectors, or applications such as security, data center control, information sharing, conference room presentations, and training.
- Installation takes seconds without requiring extensive adjustments.
- HDCP according to HDCP Revision 1.4/2.2 specification
- Supports HDTV resolutions up to 4K/60Hz
- Supports Deep Color 12-bit
- Supports LPCM 7.1CH and DTS-HD Master Audio
- Supports Full 3D
- Input: 1x HDMI (Type A connector on cable, 0.5m)
- Outputs: 2x HDMI (Type A socket)
- Output resolution: 480i~1080p@50/60Hz, 1080p@24/50/60Hz, VGA~UXGA, 2K@60Hz, 4K@60Hz
- Housing material: Plastic
Item no.:
65009C
InLine® RCA Audio over LAN / Ethernet / RJ45 Cable 2pcs. one set
This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).
- Set of 2 adapters, transmitter and receiver
- 2x RCA male plug to RJ45 female port
- max. patch cable length 50m, depending on wire diameter and contact resistance
- for analog stereo audio signals
- adapters cable length: 2x 10cm
Item no.:
89001
InLine® Serial switch manual, RS232, 9-pin Sub-D
This manual data switch enables easy splitting of serial signals or similar via the 9-pole Sub-D interface between one input and 2 outputs or vice versa. The switchover is purely mechanical, no additional power supply is required. The shielding is occupied
- Manual Sub-D switch 9-pole, 1 unit to 2 units or vice versa
- 2x Sub-D plug (male) to 1x Sub-D socket (female)
- 1:1 assignment, shielded
InLine® VGA + Audio Extender Receiver max. 300m via UTP / STP network Cable RJ45
InLine® VGA + Audio Extender Receiver max. 300m via UTP / STP network Cable RJ45
- Extend VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
- Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
- Supports resolution max up to 1920 x 1200
- Interface: 1 VGA output,1 3.5 mm jack output, 1 UTP input
- Work with monitors, projectors, HDTV and flat panels
Item no.:
65016E
InLine® VGA + Audio Extender Sender max. 300m via UTP / STP network Cable RJ45
- Extend and split VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
- Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
- Supports resolution max up to 1920 x 1200
- Dual output at local unit: 1 x VGA output for local site, plus 2 x UTP output for remote site
- Work with monitors, projectors, HDTV and flat panels
Item no.:
65016
InLine® RCA Audio over LAN / Ethernet / RJ45 Cable max. 50m complete set
This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).
- Set of 2 adapters, transmitter and receiver
- 2x RCA male plugs to RJ45 female port + 1x 3.5 mm stereo plug to RJ45 female port
- max. patch cable length 50m, depending on wire diameter and contact resistance
- for analog stereo audio signals
- adapters cable length: 2x 10cm
Item no.:
89003
InLine® HDMI Splitter/Distributor, 2-port, 4K2K compatible
This HDMI Splitter is the perfect solution for all those high-definition digital video signals would show on two screens simultaneously. Apply it with multiple HDMI-enabled devices, like your DVD player, HDMI projector and other HDMI displays.
- Video: 3D, HD, HDCP, 4Kx2K
- Audio: Dolby Digital Plus, DTS-HD, TrueHD
- Cascade distance: Source of 1.8m, from device to device - 15m, 15m from device to display
- Supports 12-bit Deep Color per Colour channel, 36-bit in summary
- HDCP 1.3 compliant
- Aluminum housing
- LED display
- Plug and play - no software installation required
- This finds application in areas of your home theater system, presentations, training sessions or video conferences
- with 5V DC / 2A power adapter
Item no.:
65009
InLine® RJ45 switch manual
This manual change-over switch enables easy splitting of signals such as telephone, ISDN, network or similar via the RJ45 interface between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is not used.
- Manual RJ45 switch, 1 device to 2 devices or vice versa
- 2x RJ45 socket to 1x RJ45 socket
- 1:1 assignment, unshielded
- Network transfer rate up to 100 Mb/s
InLine® 3.5mm Audio over LAN / Ethernet / RJ45 Cable max. 50m complete set
This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).
- Set of 2 adapters, transmitter and receiver
- 2x 3.5 mm stereo plug to RJ45 female port
- max. patch cable length 50m, depending on wire diameter and contact resistance
- for analog stereo audio signals
- adapters cable length: 2x 10cm
Item no.:
89002
InLine® HDMI Switch, 4K2K@60Hz, HDCP 2.2
This lnline® HDMI Switch is exclusively used to connect several USB sources (e.g. DVD Player, Blu-Ray Player, Game Consoles, etc.) with one output device (e.g. Monitor, TV, Beamer, etc.). The selection of the
playback devices is possible by the button an the front of the product or by the supplied remote control.
playback devices is possible by the button an the front of the product or by the supplied remote control.
- Input voltage/current: 5V/DC, max. 2A
- Power: 5W max.
- Max. Resolution: 4.096x2.160@ 60Hz
- Connection input: 3 x HDMI
- Connection output: 1 x HDMI
- Vertical frequency range: 50/60Hz
- Video bandwidth: 6Gb/s / 600MHz per channel, 18Gb/s total
- HDR is supported
- Dimensions: approx. 117 x 65 x 28mm (L x W x H)
InLine® AV Switch manual, RCA IN/OUT
This manual media switcher allows easy splitting of audio and video signals the analogue RCA interface between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is occupied.
- Manual audio/video switch 3-way RCA, 2 AV inputs to 1 AV output or vice versa
- 9x RCA socket (3x red, 3x white, 3x yellow)
- 1:1 assignment, shielded
- Metal housing
- for analogue audio/video signals
InLine® USB 2.0 switch manual
This manual switch enables easy sharing of one USB 2.0 device with USB-A connection to 2 computers. The switch is purely mechanical, no additional power supply is required.
- Manual USB switch, 1 USB device to 2 computers
- 2x USB socket type B, 1x USB socket type A
- Required cables (2x, optional): USB cable plug A to plug B for connection to the computers
- Additional USB devices can be connected via an optional USB hub (not included)
InLine® USB KM-Switch for Keyboard & Mouse 2 PC
Switch Easily by Using Your Cursor Sliding Across Screen Border. The switch is a 2-port keyboard mouse switch that features our latest Border Switch and True Transparent USB (TTU) Emulation Technology. The Border Switch Technology allows mouse slideover seamlessly between two distinct PC monitors. Thus two distinct desktops can combine into one virtual extended desktop. The TTU Technology can ensure ultimate compatibility to all types of keyboards and mice, giving users a best experience in seamless keyboard mouse switching. Besides, the device supports both Windows based PC and Mac OS.
- Border Switch Technology switches seamlessly among two PCs
- Switching just by moving mouse cursor across screen border
- Two distinct desktops combined into one virtual extended desktop
- Specially design to be used with Tablet PC with its cradle
- True Transparent USB Emulation Technology for ultimate compatibility
- Hotkeys available
- 2 Port USB A male to USB A female
- Cable length: 1.2m
- Supports Mac OSX 10.3 above and Windows (98SE and later)
Item no.:
60603I
InLine® HDMI Videowall controller, Full-HD
This stand-alone video wall controller has been designed to use high-quality multiple displays and can duplicate or enlarge a video source and distribute it to up to four monitors. With the InLine® HDMI Video Wall Distributor you can combine 4 monitors with a max. screen resolution of 1920x1200 to a large video wall (2x2 monitors). For the input signal you have an HDMI or VGA interface available. The InLine® HDMI Video Wall Distributor is easily controlled via an IR remote control. The extended frame compensation can help to optimally adapt the picture to the video wall. The InLine® HDMI Video Wall Distributor is the ideal solution for all professional video applications such as digital signage, advertising, A/V splitting or broadcasting.
- Create a 2x2, 1x4, 4x1 video wall from any Hi-Def source, using four HDTV displays
- Split and scale a single Hi-Def source to four displays
- Input and Output resolutions up to 1080p Full HD and 1920x1200 (WUXGA) with HDCP compliant
- Easy to use on-screen display user interface
- Advanced Bezel Compensation feature provides compatibility with virtually any screen frame width, and allows for accurate display of the image
- IR remote control (requires 2x AAA, not included)
- USB port for upgrade (reserved for future product enhancements)
- Locking power supply connector
- Wall-mountable enclosure, mount ears included
- Dimension (LxWxH): 120x134x26mm
- Weight: 470g
- Video Out: HDMI Port x4 (Lockable)
- Video In: HDMI Port x1 (Lockable), VGA x1
- Audio In: 3.5mm Earphone Jack x1
- USB: Mini-USB x1
- IR: 1 x Receiver, 1 x IR Extender (3.5mm Earphone Jack, optional)
- LED Indicator: Red x 1 (Power), Green x 1 (Video)
- Power Adapter: 5V4A (with lock)
- Housing: Metal
- Operation Temperature: 0 ~ 40°C
- Storage Temperature: -20 ~ 60°C
- Humidity: 0~90% RH, Non-condensing
InLine® HDMI splitter/distributor, 4-way, 4K2K@60Hz compatible
- Distributes one HDMI signal to up to four output devices - ideal for professional AV installations
- Supports 4K2K@60Hz, 3D and Deep Color 12-bit for highest picture quality
- Compatible with HDCP 1.4 and 2.2 - reliable in use with the latest end devices
- High-quality processing and stable signal distribution - ideal for digital signage and presentation systems
- Compact design and external power supply - easy to integrate into existing systems
- HDMI specification 2.0
- Frequency range: 25 MHz - 600 MHz
- Output current: max. 2.0 A / output power: 10 W
- Input alternating current frequency: ~50/60Hz, 0.4 A
- Average efficiency during operation: 79.96%
- Power consumption at no load: 0.08 W
Item no.:
65010K
InLine® VGA switch manual 2-port, 15-pin Sub-D HD
This manual data switch enables easy splitting of monitor signals or similar via the 15-pin sub-D interface (VGA) between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is occupied.
- Manual Sub-D HD switch 15-pole, 2 monitors alternately to 1 computer or vice versa
- 3x Sub-D HD socket (female)
- 1:1 assignment, shielded
- Metal housing
- Resolutions up to 1920x1440 are supported
Item no.:
60608
InLine® HDMI Matrix Switch, 4K2K, 4 inputs to 2 outputs
The InLine® HDMI MATRIX SWITCH conducts high-definition video in multiple resolutions of more up to 4K2K and multi-channel digital audio from the four HDMI sources to two displays devices. Two outputs give you the choices of high-definition audio and video signals up to two displays. Any type of 4 to 2 matrix switch offers flexibility for existing integrated systems. This eliminates the constant effort change the sources to a display equipped with one input. Every source is accessible at al times from any display device with an IR remote control.
- Video resolution: max. 4K2K (10,2 Gbit/s all channels)
- cable length max. 10m
- Cascadable: max. 3x without quality loss
- Bandwidth: 40MHz / 3,4 Gbit/s each channel
- 12-bit per channel (36 bit all channel) for strong colours
- HDCP
- supports 3D up to 1080p
- Uncompressed audio files, such as LPCM
- Compressed Audio: DTS Digital
- Power consumption: 2,5W (<1W standby)
Item no.:
65011K
InLine® Cable KVM Switch, 2-port, HDMI, USB, Audio
This device is a 2-port compact HDMI USB "Cable KVM Switch" with 2 sets of fixed USB KVM & Audio/Mic combo cables and a wired QuickSwitch button for easy connection to your two computers. It allows you to access, control, boot and reboot two USB-enabled multimedia computers with only one USB keyboard, mouse, display and a speaker set and microphone. For easy and fast switching between two computers, you can use either keyboard hotkeys, the QuickSwitch button or the Switching Software Client installed on your PCs! QuickSwitch button for instant switching operation: The QuickSwitch button can be conveniently placed near your hand on the desktop. Whenever you need to switch computer channel, you can press it lightly for instant switching to the other computer. It is the most easy and fastest way to switch. The QuickSwitch button comes optionally either with a soft-magnet bottom to be readily attached to any metal surface, or with a Hook-and-loop sticker to be applied to any spot you like. Beside the QuickSwitch button, you can also use the keyboard hotkeys and software switching utility. Switching Software Support for PC and Mac: The device comes with both Windows and Mac version of the Switching Software utility program that can be installed on the connected computers to facilitate easy “software” switching. The Switching Software can show you the current active PC, and allows you to select PC as well as configure keyboard hotkeys. It appears as an icon on the system tray of your Window desktop, and will change its number icon upon switching to show the active computer port. With this software utility, it will give KVM users utmost convenience and control.
- 1 x wired QuickSwitch Button for instant switching by a flip, length 1.5m
- 2x fixed HDMI USB KVM Audio/Mic combo cables 0.9m
- Windows and Mac switching software support
- USB 2.0 hub ports for keyboard, mouse or other high-speed USB devices
- HDMI digital video up to 1920 x 1080 / 1080p Full HD
- Independent/simultaneous switching of PC and Audio/Mic channel
- User-definable hotkeys and universal hotkey for computer switching
- 2 cable sets: 1x HDMI male plug, 1x USB A male plug, 2x 3.5mm audio plugs
- Device: 1x HDMI female port, 2x USB A female port, 2x 3.5mm audio jack
- USB interface powered
InLine® HDMI Switch, 3-port, 8K4K@60Hz, HDCP 2.3
- Supports 8K at 60 Hz and 4K at 144 Hz – brilliant image quality for demanding environments
- HDMI 2.1 & HDCP 2.3 – full compatibility with modern AV systems
- Uncompressed & compressed audio formats – ideal for home theater and professional installations
- Automatic or manual switching – flexible use with IR remote control
- Compact design & easy integration – seamlessly fits into existing AV setups
The InLine 3-way HDMI switch enables efficient management of multiple HDMI sources in professional AV environments. With three HDMI inputs and one HDMI output, game consoles, Blu-ray players or computers can be easily connected to a TV or monitor and conveniently switched.
Thanks to HDMI 2.1 support, the switch transmits resolutions up to 8K @ 60 Hz and offers a high refresh rate of up to 144 Hz at 4K. This makes it ideal for demanding visual applications, whether in home theater, digital signage solutions or professional gaming setups.
In addition to razor-sharp image quality, the switch impresses with comprehensive audio compatibility, supporting both uncompressed formats (LPCM 7.1) and Dolby TrueHD, DTS-HD and Dolby AC3. The built-in IR remote allows for convenient control, while the compact design makes it easy to integrate into existing installations.
Technical data:
- Resolution: up to 8K @ 60 Hz (7680x4320 px), 4K @ 144 Hz (3840x2160 px), 480i/480p, 576i/576p, 720p, 1080i/1080p, 1440p, 2160p (4K), 4320p (8K)
- HDMI/HDCP version: HDMI 2.1, HDCP 2.3
- Supports video in color format at: 24 bits, 30 bits, 36 bits
- Max. transmission rate: 48 Gb/s
- Supports audio: DTS HD/Dolby* TrueHD/LPCM7.1 / DTS / Dolby*-AC3 / DSD HD (HBR)
- Input current: 5V/1A
- Distance between the input and output cable: <2m AWG24 HDMI standard cable
- Maximum output cable length: 2m AWG24 HDMI standard cable
- Operating temperature: -15 to + 55°C
- Operating humidity: 5% to 90% RH
- Dimensions: 83 x 56.5 x 20 mm
Package Contents:
- 1x HDMI Switch
- 1x USB-C cable (1m)
- 1x IR remote control
- 1x user manual (DE/EN)
*To operate the HDMI switcher, make sure that the source devices and display devices are connected correctly. To ensure that the corresponding interfaces function optimally, use the supplied USB-C power cable. First turn on the switcher and then the source and display devices.
Item no.:
65020
InLine® Desktop KVM Switch, 2-port, Dual Monitor DisplayPort 1.2, 4K, USB, audio
True Transparent USB Emulation Technology for Keyboards and Mouse
The InLine® 63642I is a 2-port dual monitors USB KVM switch designed for sharing two multimedia computers to two flat panel displays. Its audio and mic switching feature gives you an uninterrupted audio experience that maximizes your multimedia application with KVM operation. The DisplayPort version 1.2 technology provides a sufficient bandwidth that is demanded by 4K ultra-high definition display.
Audio and microphone switching offers uninterrupted multimedia experience
The audio and microphone switching function of KVM Switch allows you to leverage the multimedia systems on each of your two computers. You can monitor the audio/ mic input/ output of each computer without plugging on and off the audio/mic cables. User can also choose to use either independent/ simultaneous switching of both PC port and audio/ microphone port for their maximum convenience. Furthermore, it offers you user-programmable simultaneous/ independent PC and audio/mic switching function for flexible multimedia and KVM switching operation.
True Transparent USB Emulation for all advanced keyboards and mice
With the TTU Emulation Technology, which embodies itself within a new ASIC chip, the DisplayPort Dual Monitors USB KVM Switch is capable of a complete versatility in dealing with the functional requirements of all types of advanced keyboards and mice. No matter users are using gaming mice or gaming keypads for high performance in exciting gaming sessions, or they are using same advanced keyboards and mice in other high-profile computer maneuvering actions, they can always appreciate what the TTU technology can do for them – a smooth and faithful emulation that not only duplicate all the functionalities of that keyboard and mouse, but also stabilize the switching actions with a impressive switching speed.
4K for excellent image quality
4K Ultra HD delivers four times the Full HD quality which means more sharply detailed images can be displayed but also less visible pixel appeared. It perfectly applies in the field of graphic design or exhibition, such as CAD/CAM or demo room. These reasons results in the market of 4K-enabled computers and displays are growing gradually. In order of meet the demand for 4K video streaming, the KVM switch is fully supported the specification of DisplayPort 1.2. Moreover, the backward compatibly is supported as well.
Features:
The InLine® 63642I is a 2-port dual monitors USB KVM switch designed for sharing two multimedia computers to two flat panel displays. Its audio and mic switching feature gives you an uninterrupted audio experience that maximizes your multimedia application with KVM operation. The DisplayPort version 1.2 technology provides a sufficient bandwidth that is demanded by 4K ultra-high definition display.
Audio and microphone switching offers uninterrupted multimedia experience
The audio and microphone switching function of KVM Switch allows you to leverage the multimedia systems on each of your two computers. You can monitor the audio/ mic input/ output of each computer without plugging on and off the audio/mic cables. User can also choose to use either independent/ simultaneous switching of both PC port and audio/ microphone port for their maximum convenience. Furthermore, it offers you user-programmable simultaneous/ independent PC and audio/mic switching function for flexible multimedia and KVM switching operation.
True Transparent USB Emulation for all advanced keyboards and mice
With the TTU Emulation Technology, which embodies itself within a new ASIC chip, the DisplayPort Dual Monitors USB KVM Switch is capable of a complete versatility in dealing with the functional requirements of all types of advanced keyboards and mice. No matter users are using gaming mice or gaming keypads for high performance in exciting gaming sessions, or they are using same advanced keyboards and mice in other high-profile computer maneuvering actions, they can always appreciate what the TTU technology can do for them – a smooth and faithful emulation that not only duplicate all the functionalities of that keyboard and mouse, but also stabilize the switching actions with a impressive switching speed.
4K for excellent image quality
4K Ultra HD delivers four times the Full HD quality which means more sharply detailed images can be displayed but also less visible pixel appeared. It perfectly applies in the field of graphic design or exhibition, such as CAD/CAM or demo room. These reasons results in the market of 4K-enabled computers and displays are growing gradually. In order of meet the demand for 4K video streaming, the KVM switch is fully supported the specification of DisplayPort 1.2. Moreover, the backward compatibly is supported as well.
Features:
- 2-port Dual Monitors DisplayPort USB KVM Switch w/ audio & mic
- True Transparent USB (TTU) emulation technology for any keyboard and mouse
- Support dual monitor/flat panel display both on console and remote
- 2 extra USB 2.0 device port for high-speed USB device sharing
- Independent peripheral switching configurable by hotkeys
- 2 channel stereo sound for theater audio experience
- Simultaneous/independent switching of audio/ device/ PC ports
- Resolution support up to 3840 x 2160 @30Hz
- Full driver support for all types of USB keyboards and mice
- Port selection by push buttons and keyboard hotkeys
- Multi-platform support PCs and Mac
- Status LED display for easy port status monitoring
- Buzzer sound for port switching confirmation
- Metal enclosure for best shielding and protection
- Ports: 2
- Console Keyboard: USB Type A Female
- Console Mouse: USB Type A Female
- Console Video: 2x DisplayPort Female
- Audio: 2x 3.5mm Audio/ Mic Jack Female
- PC Keyboard/Mouse: 2x USB Type B Female
- PC Video: 4x DisplayPort Female
- TTU: Yes
- Additional USB Device: 2x USB Type A Female
- PC port LEDs: 2 (Green)
- Hub port LEDs: 2 (Red)
- PC Selection: Push Button / Hotkeys
- Display Resolution: 3840 x 2160 (@30Hz)
- Operating Temperature 0~40°C
- Storage Temperature: -20~60°C
- Humidity Limits: 0~90% RH, Non-Condensing
- Weight: 750g
- Dimension (LxDxH): 163x100x66mm
InLine® DisplayPort to 2x HDMI Splitter & Video Wall Function FullHD
This video splitter allows you to connect up to 2 HDMI displays to a DisplayPort connector on the PC. The display can be cloned or extended, so the same image on each monitor or a simple video wall where the display on both monitors side by side distributed
- Input:. 1x DisplayPort female connector, compatible with DisplayPort version 1.2
- Output: 2x HDMI female port
- Supports the display in the cloning and expansion mode
- If the source device outputs too little or no voltage, an optional 5V power supply can be used
- Works with PC and Mac
- Plug and play, no additional software required
- Maximum resolution 1920x1080 or 3840x1080 in expansion mode
Item no.:
57821A
InLine® KVM Desktop Switch, Dual Monitor, DP+HDMI, 4K, USB 3.0, Audio
The InLine KVM Desktop Switch was specially developed for the use of two monitors (1x HDMI, 1x DisplayPort) on two multimedia computers. With the InLine KVM Desktop Switch you can completely control two PCs with only one USB keyboard, mouse and two monitors. This dual monitor HDMI/DP KVM switch supports resolutions of up to 3840x2160 (4K) at 60Hz for maximum comfort when adapting to your display needs.
With TTU emulation technology integrated into a new ASIC chip, the dual monitor HDMI/DP USB KVM switch is able to offer complete versatility in meeting the functional requirements of all types of modern keyboards and mice. It features 2-channel stereo sound for full sound functionality. Its advanced audio & microphone switching function also gives you an uninterrupted multimedia experience during KVM operation (e.g. you can listen to music from one PC while operating another). Multi-platform support for PC and Mac is also available.
The InLine KVM Switches are designed for office and home office applications as well as for monitoring and controlling multiple computers from one workstation. However, the KVM Switches are not suitable for gaming accessories such as mice and keyboards with programmable special keys, nor are gaming monitors with high frequencies of 120 Hz or more supported. The hot key function for the keyboard only works on the designated console USB port, connected via the USB hub ports, hot key control is not possible.
With TTU emulation technology integrated into a new ASIC chip, the dual monitor HDMI/DP USB KVM switch is able to offer complete versatility in meeting the functional requirements of all types of modern keyboards and mice. It features 2-channel stereo sound for full sound functionality. Its advanced audio & microphone switching function also gives you an uninterrupted multimedia experience during KVM operation (e.g. you can listen to music from one PC while operating another). Multi-platform support for PC and Mac is also available.
- 2-way KVM switch
- Two computers on one console (consisting of 1x DisplayPort monitor, 1x HDMI monitor, 1x USB mouse and 1x USB keyboard)
- Two additional USB 3.0 (USB 3.2 Gen 1) Type-A connectors for peripherals
- Audio support for microphone and speakers
- Maximum video resolution: 3840x2160 per monitor
- 1x InLine KVM Desktop Switch, Dual Monitor, DisplayPort + HDMI
- 2x KVM cable set
- 1x plug power supply DC 12V
- 1x instruction manual
The InLine KVM Switches are designed for office and home office applications as well as for monitoring and controlling multiple computers from one workstation. However, the KVM Switches are not suitable for gaming accessories such as mice and keyboards with programmable special keys, nor are gaming monitors with high frequencies of 120 Hz or more supported. The hot key function for the keyboard only works on the designated console USB port, connected via the USB hub ports, hot key control is not possible.
InLine® Cable KVM Switch, 2-port, Displayport 1.2, 4K, USB, Audio
This device is a 2-port DisplayPort USB cable KVM switch with two integrated USB/KVM and audio/micro combo cable sets and a QuickSwitch button for remote control via cable to quickly connect your computers.
You can access, control, boot and restart multiple multimedia computers with just one USB keyboard, mouse, monitor and speaker set with mic.
To quickly switch between two computers, use the QuickSwitch button or the switching software installed on the computers! On Windows and Mac platforms, it provides an innovative, user-friendly KVM switching software - a small Windows/Mac client application to support KVM switching operations such as selecting PCs and programming hotkey sequences, autoscanning, programming autoscan delay time, independent/simultaneous audio & PC switching, etc.
This DisplayPort USB cable KVM switch offers USB 2.0 interface technology for Plug&Play and hot-plugging.
In addition to a mouse or keyboard, other fast USB devices can also be connected to the two USB 2.0 ports. Users benefit from maximum flexibility and user-friendliness thanks to the compact design in a single device.
The InLine KVM switches are designed for office and home office applications as well as for monitoring and controlling multiple computers from one workstation.
However, the KVM switches are not suitable for gaming accessories such as mouse and keyboards with programmable special keys, nor are gaming monitors with high frequencies from 120Hz supported.
The hotkey function for the keyboard only works on the designated console USB port; hotkey control is not possible when connected via the USB hub ports.
You can access, control, boot and restart multiple multimedia computers with just one USB keyboard, mouse, monitor and speaker set with mic.
To quickly switch between two computers, use the QuickSwitch button or the switching software installed on the computers! On Windows and Mac platforms, it provides an innovative, user-friendly KVM switching software - a small Windows/Mac client application to support KVM switching operations such as selecting PCs and programming hotkey sequences, autoscanning, programming autoscan delay time, independent/simultaneous audio & PC switching, etc.
This DisplayPort USB cable KVM switch offers USB 2.0 interface technology for Plug&Play and hot-plugging.
In addition to a mouse or keyboard, other fast USB devices can also be connected to the two USB 2.0 ports. Users benefit from maximum flexibility and user-friendliness thanks to the compact design in a single device.
- 2-way KVM USB DisplayPort switch with audio
- 2 integrated cable sets 1.2m, with 1x DisplayPort plug, 1x USB plug, 2x 3.5mm audio plug
- Switch with 1x DisplayPort socket, 2x USB 2.0 socket, 2x 3.5mm audio socket
- Cable remote control with QuickSwitch button, 1.5m
- 2 LEDs to indicate the active PC
- Max. Resolution: 3840x2160 pixels @ 60Hz
- DisplayPort 1.2 compatible
- Power supply via USB, no external power supply unit required
- Switching via quickswitch button or programmed hotkey sequences
- Compatible for Windows and Mac
The InLine KVM switches are designed for office and home office applications as well as for monitoring and controlling multiple computers from one workstation.
However, the KVM switches are not suitable for gaming accessories such as mouse and keyboards with programmable special keys, nor are gaming monitors with high frequencies from 120Hz supported.
The hotkey function for the keyboard only works on the designated console USB port; hotkey control is not possible when connected via the USB hub ports.
Item no.:
63613I
InLine® HDMI Switch 3 IN to 1 OUT signal 4K2K 3D HD Audio
This is an intelligent HDMI 3X1 Amplifier Switcher. It allows to connect three HDMI source devices to one HD monitor or projector. Adopted touch button design lets you enjoy the high technology and easy switching life. This intelligent Switcher is quite different from other switchers. It has one input port on the front panel. This not only reduce the switcher to an ideal small size but also be more convenient for users to connect the source devices. This HDMI Amplifier Switcher has many features that enable it to perform in a superior manner. Among those features you will find:
- One input port on the front panel is specialized for portable devices
- Multi-switching methods: intelligent, IR remote or by touch button
- Supports highest video resolution up to 4k2k.
- Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
- Supports 16bit per channel (48bit all channel) deep color.
- HDCP pass-through.
- Supports uncompressed audio such as LPCM.
- Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD).
- Supports 3D all format, including 1080p@23.98/24Hz, 720p@ 59.94/60Hz/50Hz.
Item no.:
65014
