InLine® Cable Splitter HDMI 2-port, 4K/60Hz, with USB power cable, 0.5m

This InLine® HDMI splitter 2-fold, 4k/60Hz splits an HDMI input signal to two HDMI output devices. The video and audio signal is duplicated and can be output simultaneously on both playback devices. If two or more HDMI splitters are cascaded, they can produce a larger distribution and length. The HDMI splitter is ideal for retail TV and showrooms, set-top boxes, Blu-ray players and projectors, or applications such as security, data center control, information sharing, conference room presentations, and training.

Installation takes seconds without requiring extensive adjustments.
HDCP according to HDCP Revision 1.4/2.2 specification
Supports HDTV resolutions up to 4K/60Hz
Supports Deep Color 12-bit
Supports LPCM 7.1CH and DTS-HD Master Audio
Supports Full 3D
Input: 1x HDMI (Type A connector on cable, 0.5m)
Outputs: 2x HDMI (Type A socket)
Output resolution: 480i~1080p@50/60Hz, 1080p@24/50/60Hz, VGA~UXGA, 2K@60Hz, 4K@60Hz
Housing material: Plastic

Item no.: 65009C

InLine® RCA Audio over LAN / Ethernet / RJ45 Cable 2pcs. one set

This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).

Set of 2 adapters, transmitter and receiver
2x RCA male plug to RJ45 female port
max. patch cable length 50m, depending on wire diameter and contact resistance
for analog stereo audio signals
adapters cable length: 2x 10cm

Item no.: 89001

InLine® VGA + Audio Extender Receiver max. 300m via UTP / STP network Cable RJ45

Extend VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
Supports resolution max up to 1920 x 1200
Interface: 1 VGA output,1 3.5 mm jack output, 1 UTP input
Work with monitors, projectors, HDTV and flat panels

Item no.: 65016E

InLine® Serial switch manual, RS232, 9-pin Sub-D

This manual data switch enables easy splitting of serial signals or similar via the 9-pole Sub-D interface between one input and 2 outputs or vice versa. The switchover is purely mechanical, no additional power supply is required. The shielding is occupied

Manual Sub-D switch 9-pole, 1 unit to 2 units or vice versa
2x Sub-D plug (male) to 1x Sub-D socket (female)
1:1 assignment, shielded

InLine® VGA + Audio Extender Sender max. 300m via UTP / STP network Cable RJ45

Extend and split VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
Supports resolution max up to 1920 x 1200
Dual output at local unit: 1 x VGA output for local site, plus 2 x UTP output for remote site
Work with monitors, projectors, HDTV and flat panels

Item no.: 65016

InLine® RCA Audio over LAN / Ethernet / RJ45 Cable max. 50m complete set

This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).

Set of 2 adapters, transmitter and receiver
2x RCA male plugs to RJ45 female port + 1x 3.5 mm stereo plug to RJ45 female port
max. patch cable length 50m, depending on wire diameter and contact resistance
for analog stereo audio signals
adapters cable length: 2x 10cm

Item no.: 89003

InLine® HDMI Splitter/Distributor, 2-port, 4K2K compatible

This HDMI Splitter is the perfect solution for all those high-definition digital video signals would show on two screens simultaneously. Apply it with multiple HDMI-enabled devices, like your DVD player, HDMI projector and other HDMI displays.

Video: 3D, HD, HDCP, 4Kx2K
Audio: Dolby Digital Plus, DTS-HD, TrueHD
Cascade distance: Source of 1.8m, from device to device - 15m, 15m from device to display
Supports 12-bit Deep Color per Colour channel, 36-bit in summary
HDCP 1.3 compliant
Aluminum housing
LED display
Plug and play - no software installation required
This finds application in areas of your home theater system, presentations, training sessions or video conferences
with 5V DC / 2A power adapter

Item no.: 65009

InLine® RJ45 switch manual

This manual change-over switch enables easy splitting of signals such as telephone, ISDN, network or similar via the RJ45 interface between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is not used.

Manual RJ45 switch, 1 device to 2 devices or vice versa
2x RJ45 socket to 1x RJ45 socket
1:1 assignment, unshielded
Network transfer rate up to 100 Mb/s

InLine® 3.5mm Audio over LAN / Ethernet / RJ45 Cable max. 50m complete set

This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).

Set of 2 adapters, transmitter and receiver
2x 3.5 mm stereo plug to RJ45 female port
max. patch cable length 50m, depending on wire diameter and contact resistance
for analog stereo audio signals
adapters cable length: 2x 10cm

Item no.: 89002

InLine® HDMI Switch, 4K2K@60Hz, HDCP 2.2

This lnline® HDMI Switch is exclusively used to connect several USB sources (e.g. DVD Player, Blu-Ray Player, Game Consoles, etc.) with one output device (e.g. Monitor, TV, Beamer, etc.). The selection of the
playback devices is possible by the button an the front of the product or by the supplied remote control.

Input voltage/current: 5V/DC, max. 2A
Power: 5W max.
Max. Resolution: 4.096x2.160@ 60Hz
Connection input: 3 x HDMI
Connection output: 1 x HDMI
Vertical frequency range: 50/60Hz
Video bandwidth: 6Gb/s / 600MHz per channel, 18Gb/s total
HDR is supported
Dimensions: approx. 117 x 65 x 28mm (L x W x H)

InLine® USB 2.0 switch manual

This manual switch enables easy sharing of one USB 2.0 device with USB-A connection to 2 computers. The switch is purely mechanical, no additional power supply is required.

Manual USB switch, 1 USB device to 2 computers
2x USB socket type B, 1x USB socket type A
Required cables (2x, optional): USB cable plug A to plug B for connection to the computers
Additional USB devices can be connected via an optional USB hub (not included)

InLine® AV Switch manual, RCA IN/OUT

This manual media switcher allows easy splitting of audio and video signals the analogue RCA interface between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is occupied.

Manual audio/video switch 3-way RCA, 2 AV inputs to 1 AV output or vice versa
9x RCA socket (3x red, 3x white, 3x yellow)
1:1 assignment, shielded
Metal housing
for analogue audio/video signals

InLine® HDMI splitter/distributor, 4-way, 4K2K@60Hz compatible

Distributes one HDMI signal to up to four output devices - ideal for professional AV installations
Supports 4K2K@60Hz, 3D and Deep Color 12-bit for highest picture quality
Compatible with HDCP 1.4 and 2.2 - reliable in use with the latest end devices
High-quality processing and stable signal distribution - ideal for digital signage and presentation systems
Compact design and external power supply - easy to integrate into existing systems

The InLine® HDMI Splitter 65010K is the reliable solution for professional AV environments in which an HDMI signal needs to be distributed to multiple output devices. It enables simultaneous signal transmission from one HDMI source to up to four displays - without any loss of quality. With support for 4K2K@60Hz, 12-bit Deep Color and 3D, the device ensures brilliant picture quality in the highest resolution.Thanks to integrated HDCP decryption and encryption (compatible with HDCP Rev. 1.4/2.2), the splitter can be easily integrated into modern system landscapes. Audio formats such as Dolby TrueHD, DTS-HD Master Audio and LPCM 7.1 are transmitted loss-free - perfect for high-quality media presentations or installations in the digital signage sector.The compact design, combined with a sturdy metal housing and a 5V power supply unit, makes the device ideal for use in AV racks, training rooms, conference systems or exhibitions.System houses and specialist retailers benefit from a reliable and easy-to-integrate solution that is compatible with common HDMI standards.

HDMI specification 2.0
Frequency range: 25 MHz - 600 MHz
Output current: max. 2.0 A / output power: 10 W
Input alternating current frequency: ~50/60Hz, 0.4 A
Average efficiency during operation: 79.96%
Power consumption at no load: 0.08 W

Item no.: 65010K

InLine® HDMI Videowall controller, Full-HD

This stand-alone video wall controller has been designed to use high-quality multiple displays and can duplicate or enlarge a video source and distribute it to up to four monitors. With the InLine® HDMI Video Wall Distributor you can combine 4 monitors with a max. screen resolution of 1920x1200 to a large video wall (2x2 monitors). For the input signal you have an HDMI or VGA interface available. The InLine® HDMI Video Wall Distributor is easily controlled via an IR remote control. The extended frame compensation can help to optimally adapt the picture to the video wall. The InLine® HDMI Video Wall Distributor is the ideal solution for all professional video applications such as digital signage, advertising, A/V splitting or broadcasting.

Create a 2x2, 1x4, 4x1 video wall from any Hi-Def source, using four HDTV displays
Split and scale a single Hi-Def source to four displays
Input and Output resolutions up to 1080p Full HD and 1920x1200 (WUXGA) with HDCP compliant
Easy to use on-screen display user interface
Advanced Bezel Compensation feature provides compatibility with virtually any screen frame width, and allows for accurate display of the image
IR remote control
USB port for upgrade (reserved for future product enhancements)
Locking power supply connector
Wall-mountable enclosure, mount ears included
Dimension (LxWxH): 120x134x26mm
Weight: 470g
Video Out: HDMI Port x4 (Lockable)
Video In: HDMI Port x1 (Lockable), VGA x1
Audio In: 3.5mm Earphone Jack x1
USB: Mini-USB x1
IR: 1 x Receiver, 1 x IR Extender (3.5mm Earphone Jack, optional)
LED Indicator: Red x 1 (Power), Green x 1 (Video)
Power Adapter: 5V4A (with lock)
Housing: Metal
Operation Temperature: 0 ~ 40°C
Storage Temperature: -20 ~ 60°C
Humidity: 0~90% RH, Non-condensing

InLine® VGA switch manual 2-port, 15-pin Sub-D HD

This manual data switch enables easy splitting of monitor signals or similar via the 15-pin sub-D interface (VGA) between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is occupied.

Manual Sub-D HD switch 15-pole, 2 monitors alternately to 1 computer or vice versa
3x Sub-D HD socket (female)
1:1 assignment, shielded
Metal housing
Resolutions up to 1920x1440 are supported

Item no.: 60608

InLine® HDMI Switch, 3-port, 8K4K@60Hz, HDCP 2.3

Supports 8K at 60 Hz and 4K at 144 Hz – brilliant image quality for demanding environments
HDMI 2.1 & HDCP 2.3 – full compatibility with modern AV systems
Uncompressed & compressed audio formats – ideal for home theater and professional installations
Automatic or manual switching – flexible use with IR remote control
Compact design & easy integration – seamlessly fits into existing AV setups

The InLine 3-way HDMI switch enables efficient management of multiple HDMI sources in professional AV environments. With three HDMI inputs and one HDMI output, game consoles, Blu-ray players or computers can be easily connected to a TV or monitor and conveniently switched.

Thanks to HDMI 2.1 support, the switch transmits resolutions up to 8K @ 60 Hz and offers a high refresh rate of up to 144 Hz at 4K. This makes it ideal for demanding visual applications, whether in home theater, digital signage solutions or professional gaming setups.

In addition to razor-sharp image quality, the switch impresses with comprehensive audio compatibility, supporting both uncompressed formats (LPCM 7.1) and Dolby TrueHD, DTS-HD and Dolby AC3. The built-in IR remote allows for convenient control, while the compact design makes it easy to integrate into existing installations.

Technical data:

Resolution: up to 8K @ 60 Hz (7680x4320 px), 4K @ 144 Hz (3840x2160 px), 480i/480p, 576i/576p, 720p, 1080i/1080p, 1440p, 2160p (4K), 4320p (8K)
HDMI/HDCP version: HDMI 2.1, HDCP 2.3
Supports video in color format at: 24 bits, 30 bits, 36 bits
Max. transmission rate: 48 Gb/s
Supports audio: DTS HD/Dolby* TrueHD/LPCM7.1 / DTS / Dolby*-AC3 / DSD HD (HBR)
Input current: 5V/1A
Distance between the input and output cable: <2m AWG24 HDMI standard cable
Maximum output cable length: 2m AWG24 HDMI standard cable
Operating temperature: -15 to + 55°C
Operating humidity: 5% to 90% RH
Dimensions: 83 x 56.5 x 20 mm

Package Contents:

1x HDMI Switch
1x USB-C cable (1m)
1x IR remote control
1x user manual (DE/EN)

*To operate the HDMI switcher, make sure that the source devices and display devices are connected correctly. To ensure that the corresponding interfaces function optimally, use the supplied USB-C power cable. First turn on the switcher and then the source and display devices.

Item no.: 65020

InLine® HDMI Matrix Switch, 4K2K, 4 inputs to 2 outputs

The InLine® HDMI MATRIX SWITCH conducts high-definition video in multiple resolutions of more up to 4K2K and multi-channel digital audio from the four HDMI sources to two displays devices. Two outputs give you the choices of high-definition audio and video signals up to two displays. Any type of 4 to 2 matrix switch offers flexibility for existing integrated systems. This eliminates the constant effort change the sources to a display equipped with one input. Every source is accessible at al times from any display device with an IR remote control.

Video resolution: max. 4K2K (10,2 Gbit/s all channels)
cable length max. 10m
Cascadable: max. 3x without quality loss
Bandwidth: 40MHz / 3,4 Gbit/s each channel
12-bit per channel (36 bit all channel) for strong colours
HDCP
supports 3D up to 1080p
Uncompressed audio files, such as LPCM
Compressed Audio: DTS Digital
Power consumption: 2,5W (<1W standby)

Note: The audio outputs on the rear (Toslink, coaxial, analogue stereo) are connected to output A, only the audio signal from output A is provided separately.

Item no.: 65011K

InLine® DisplayPort to 2x HDMI Splitter & Video Wall Function FullHD

This video splitter allows you to connect up to 2 HDMI displays to a DisplayPort connector on the PC. The display can be cloned or extended, so the same image on each monitor or a simple video wall where the display on both monitors side by side distributed

Input:. 1x DisplayPort female connector, compatible with DisplayPort version 1.2
Output: 2x HDMI female port
Supports the display in the cloning and expansion mode
If the source device outputs too little or no voltage, an optional 5V power supply can be used
Works with PC and Mac
Plug and play, no additional software required
Maximum resolution 1920x1080 or 3840x1080 in expansion mode

Item no.: 57821A

InLine® HDMI Switch 3 IN to 1 OUT signal 4K2K 3D HD Audio

This is an intelligent HDMI 3X1 Amplifier Switcher. It allows to connect three HDMI source devices to one HD monitor or projector. Adopted touch button design lets you enjoy the high technology and easy switching life. This intelligent Switcher is quite different from other switchers. It has one input port on the front panel. This not only reduce the switcher to an ideal small size but also be more convenient for users to connect the source devices. This HDMI Amplifier Switcher has many features that enable it to perform in a superior manner. Among those features you will find:

One input port on the front panel is specialized for portable devices
Multi-switching methods: intelligent, IR remote or by touch button
Supports highest video resolution up to 4k2k.
Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
Supports 16bit per channel (48bit all channel) deep color.
HDCP pass-through.
Supports uncompressed audio such as LPCM.
Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD).
Supports 3D all format, including 1080p@23.98/24Hz, 720p@ 59.94/60Hz/50Hz.

Item no.: 65014

InLine® DisplayPort to HDMI 2x2 Video Wall Splitter 1 IN 4 OUT 4K UltraHD

This video splitter allows you to connect up to 4 HDMI displays to a DisplayPort connector on the PC. The display can be cloned or extended, so the same image on each of the 4 monitors or a simple video wall (1x4 or 2x2), where the display is distributed to the monitors side by side. In the connection of 2 these Splitters to a PC with 2 DisplayPort outputs, even a video wall with 2x4 monitors are supported

Input:. 1x DisplayPort connector
Output: 4x HDMI socket
supports the display in the cloning and expansion mode, supports DisplayPort 1.2 MST and SST mode
with power supply 5VDC / 2A
Plug and play, no additional software needed
Maximum resolution 1920x1080 or 3840x2160 in expansion mode
Max: 1920x1080 can be displayed on up to 4 monitors if the item works as a splitter, ie on each screen is the same screen. At 4 monitors the splinter in Expand View mode, resolution 3840x2160 display (real 1920x1080 per monitor), or 4 monitors side by side even 7680x1080

Note: To use the video wall function, you need graphics cards with AMD Eyefinity or Nvidia Surround. Intel Collage is not supported.

Item no.: 57831I

InLine® USB Extender up to 60m over RJ45 Patch Cable Cat.5e or better

This USB 1.1 converter can be used to increase the distance between PC and USB device to max. 60 meters. To connect the two USB boxes, a Cat. 5 / 5e / 6 cable is required. Optimal connection between PC and USB Converter via active USB hub so that the USB port of the PC is not so heavily loaded.

USB 1.1 compatible
Supports all common USB devices such as scanners, printers, digital cameras, etc.
Maximum cable length between transmitter and receiver unit: 60m
Connection with standard UTP / FTP / S-FTP patch cable
Optional power supply with 5V / 2A DC

Item no.: 33600A

InLine® 4x4 Multi-View HDMI Matrix Switch 4 IN 4 OUT Video Wall FullHD

The InLine 4x4 multi-view distributed HDMI Matrix 4 HDMI Inputs 4 HDMI outputs individually, while the mapping between the video source and the display on the display is very individually adjustable, it can be shown with any source on a 2x2 video wall. The six displayable modes are: Matrix, PIP (Picture in Picture) PAP (Picture in Picture) Quad View, Windows mode and video wall. In matrix mode, 1-4 sources can be printed on 1-4 displays. PIP forms a source as a small picture from within another source. The Windows mode shows all 4 sources in window style simultaneously on the display. The Quad View mode shows the 4 sources in windows side by side on all four displays. The PAP provides a source of great on a display, the other 3 sources besides small. The video wall stretches the mode signal from a source 4 mounted on the display as a video wall (2x2) is thus a representation of 1920x1080 to 3840x2160 inserted possible. The operation of the matrix switch can be operated via the buttons on the front panel, via an IR remote control, a mouse / keyboard (via USB) or via RS-232. The switch has 19 "format and can be comfortably accommodated with the mounting brackets in network closets. You can program up to eight individual preferences, which can be called with only 2 buttons. The OSD menu helps to display the source and programming.

HDMI Matrix switch with 4 inputs and 4 outputs
6 modes of representation: Matrix, PIP (Picture in Picture) PAP (Picture in picture) Quad View, Windows mode and video wall
HDMI - 4 inputs and 4 outputs: Maximum resolution: 1920x1080 (Full HD)
2 USB ports for connecting a mouse and keyboard, RS-232 connector (female), 3 5mm jack for IR receiver
Operating temperature: 0-40 ° C storage temperature: -20 ° to + 60 ° C, 0-90% relative humidity
Dimensions: 437x205x43mm (19"/1U) with installation brackets
External power adapter 12V DC
Batteries for the remote control are not included, 2x AAA batteries are required.

Item no.: 57830I

InLine® 4×1 HDMI 4K Switch with Audio

It is known that the most benefit of the HDMI is to integrate the audio and video signals together. This integration makes all of us enjoy the high quality of the audio and video effect. Awfully the bad effect of the HDTV audio deprives the basic right of the enthusiasts. Fortunately, we develop this new product eventually, not only to meet the ideal image of the HDTV but also to meet the need of the enthusiasts’ requirement for audio. Because it separates the audio signal from the HDMI interface, then transmit to the amplifier by Stereo, Toslink or COAX (RCA). This HDMI Switch has many features that enable it to perform in a superior manner. Among those features you will find:

Supports digital audio output simultaneously : Stereo, Toslink and COAX
Supports highest video resolution up to 4K2K@30Hz.
Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
Supports 12bit per channel (36bit all channel) deep color.
Supports HDCP.
Optional MHL to HDMI cable for MHL input support.
Supports uncompressed audio such as LPCM.
Supports compressed audio such as DTS Digital.
Support 3D all format, including 1080p@23.98/24Hz, 720p@59.94/60Hz/50Hz, bandwidth up to 340MHz.
to switch the channel, please use the "Select" button on the unit or remote control

Item no.: 65017