InLine® DVI USB KVM Extender over TP Cable with Audio up to 50m

The DVI USB KVM Extender DX050 with Audio extends your DVI display up to 50m away from your DVI source using Cat 5e cables. The use of Cat 5e cables provides a simple and reliable connection method that takes advantage of the wiring system in most modern office buildings. The DX050 incorporates UNICLASS's technology that allows the Audio KVM signal to be transmitted over Cat 5e cable. If the real EDID is required, it simply goes through the Cat 5e cable. With stereo audio support and include for popular widescreen formats (resolution up to 1920 x 1200), the DX050 provides crystal-clear image and sound quality in all installations where remote DVI displays are required. The DX050 is your ideal solution for use in any type of installation where you need to place the console as it is conveniently accessible, but to keep the system equipment to reside in a safe location-away from the dust and dirt of the factory floor, or the harsh environment influence of a construction site.

Long distance transmission-up to 50m
Uses Cat 5e cable to connect the local and remote units
Features UNICLASS EDID technology that allows transmission over Cat 5e cable
Superior video quality-up to 1920x1200 (40m), 1080p (40m), 1080i (50m)
Stereo Audio enabled
Supports widescreen formats
Support Hot plug Detect & IR Remote Control
USB Device Port
Extends the distance between DVI source and DVI display device
HDCP Compatible
USB Keyboard and USB Mouse Ports
Adjustable EQ compensation control
Content: 1x Local Extender unit (TX), 1x Remote Extender unit (RX), 1x USB to DC Jack cable, 1x Users Guide, 1x Power adapter (DC5V)

Item no.: 61640

InLine® HDMI USB KVM over IP Extender, 4K up to 100m

The InLine® 64601 4K over IP Extender comprises two distinct units, the Transmitter and Receiver unit respectively. It’s a LAN based extender and working in pairs to extend your HDMI video from local player to a remote display via an active LAN. To connect both units of transmitter and receiver, you can use either a direct CATx cable connection or through a Gigabit Ethernet Switch in between. With the feature of CATx cable, the image can be delivered up to 100m, while still keeping a satisfying image quality at the same time.

The supported resolution can be up to 2160p@60Hz with 7.1 audio channel. Applicable either over an exhibition room, working floors, demo room, control center, or other mission-critical scenarios.

With multiple receivers and transmitters even a Point-to-Point or Point-to-Multipoint and Videowall scenarios are possible to realize.

Features:

4K Over 1 Gigabit Network with Ultra low 1 frame/Sec. latency
Up to HDMI 2.0 4K 2160p@60Hz 4:2:0 Video Input and HDCP2.2 is supported
Supports 7.1 ch Audio or more (LPCM/DTS/Dolby/Dolby ATMOS)
Hybrid Video output (Each Receiver can choose different video format independently)
HDMI Audio Extract to Analog audio output (2 channel LPCM audio only)
Max. Bit Rate control (10 Mbps ~ 800 Mbps)
Video Snap shot (Video Capture)
USB 2.0 pass-thru for IP KVM application
Webpage management
RS-232 Serial control command management
Https/Telnet command management
Automatic EDID configuration
Output video rotation
Output video partial enlargement and shift for videowall and irregular video wall application
4-bit DIP switch for 16 stream channel selection
Small size / VESA mount
Rack-mount

Specification:

Transmitter:

TX/RX connector: 1x RJ45 Female
AV Tnterface: 1x HDMI Female (In), 1x HDMI Female (Out, Loopback)
USB Device: 1x USB Type B Female
IR: 1x 3.5mm Jack Female
RS232: 1x RJ12 Female
Dimension (LxWxH): 95x115x26mm

Receiver:

TX/RX connector: 1x RJ45 Female
AV Tnterface: HDMI Female (Out) x 1
USB Device: 4x USB Type A Female
IR: 1x 3.5mm Jack Female
RS232: 1x RJ12 Female
Dimension (LxWxH): 115x115x26mm

General:

Image Resolution: 3840 x 2160 @60Hz
Power Adapter: DC 5V
Operating Temperature: 0~40°C
Storage Temperature: -20~60°C
Humidty Limits: 0~90% RH, Non-condensing

Item no.: 64601