Solar cabling made easy
Everything for your PV system
High-quality solar cables, tools & accessories for your photovoltaic installation from InLine
Safe and efficient cabling is at the heart of every photovoltaic system. Whether cables for self-assembly, ready-made solutions or the right tools - InLine offers you high-quality products for reliable power transmission. Discover the extensive range and customise your solar installation to suit your needs.
InLine offers pre-assembled cables for quick installation or everything you need to assemble yourself to customise the solar installation to your needs.
Cable with high-performance conductor
Tinned copper conductors enable efficient current transmission and minimise losses.
Robustness and durability
Resistant to UV radiation, ozone and weathering - ideal for long-term outdoor use and tested in accordance with EN 60811 / 50618.
Temperature resistance even in extreme weather
Works reliably at extreme temperatures from -40 °C to +90 °C - ideal for demanding environmental conditions.
Simple installation
Flexible cables, high-quality plugs and ergonomic tools make it easy to carry out a wide range of installations.
Everything for self-assembly
Installation cable with 4mm² or 6mm" in black or red and 25-100m
InLine solar cables are the perfect solution for safe and durable cabling of photovoltaic systems. Tinned copper conductors enable efficient power transmission and minimise losses. With a rated voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC, the cables fulfil the highest requirements for modern solar systems.
The robust design makes them particularly durable and resistant to UV radiation, ozone and extreme weather conditions. Tested flame resistance in accordance with EN 60332-1-2 and the use of halogen-free materials also ensure maximum safety. The cables are designed for temperatures from -40 °C to +90 °C and are easy to install thanks to the minimal bending radius.
Note on the wire cross-section: The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® Solar installation cable H1Z2Z2-K
The solar cable H1Z2Z2-K, 4mm², has been specially developed for the cabling of photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system is operated efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar installations.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.09 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60 811 / 50618
- Flame resistance: Complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: Halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
- Durability: With a high resistance to UV radiation, ozone and weathering, the cable offers a reliable solution for long-term applications.
- Easy installation: Thanks to its flexibility and robust construction, the cable is easy to lay and suitable for a wide range of installations.
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® Solar installation cable H1Z2Z2-K
The solar cable H1Z2Z2-K, 4mm², has been specially developed for the cabling of photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system is operated efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar installations.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.09 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60 811 / 50618
- Flame resistance: Complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: Halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
- Durability: With a high resistance to UV radiation, ozone and weathering, the cable offers a reliable solution for long-term applications.
- Easy installation: Thanks to its flexibility and robust construction, the cable is easy to lay and suitable for a wide range of installations.
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® Solar installation cable H1Z2Z2-K
The solar cable H1Z2Z2-K, 4mm², has been specially developed for the cabling of photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system is operated efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar installations.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.09 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60 811 / 50618
- Flame resistance: Complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: Halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
- Durability: With a high resistance to UV radiation, ozone and weathering, the cable offers a reliable solution for long-term applications.
- Easy installation: Thanks to its flexibility and robust construction, the cable is easy to lay and suitable for a wide range of installations.
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® Solar installation cable H1Z2Z2-K
The solar cable H1Z2Z2-K, 4mm², has been specially developed for the cabling of photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system is operated efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar installations.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.09 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60 811 / 50618
- Flame resistance: Complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: Halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
- Durability: With a high resistance to UV radiation, ozone and weathering, the cable offers a reliable solution for long-term applications.
- Easy installation: Thanks to its flexibility and robust construction, the cable is easy to lay and suitable for a wide range of installations.
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® Solar installation cable H1Z2Z2-K
The solar cable H1Z2Z2-K, 4mm², has been specially developed for the cabling of photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system is operated efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar installations.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.09 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60 811 / 50618
- Flame resistance: Complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: Halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
- Durability: With a high resistance to UV radiation, ozone and weathering, the cable offers a reliable solution for long-term applications.
- Easy installation: Thanks to its flexibility and robust construction, the cable is easy to lay and suitable for a wide range of installations.
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® Solar installation cable H1Z2Z2-K
The solar cable H1Z2Z2-K, 4mm², has been specially developed for the cabling of photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system is operated efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar installations.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.09 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60 811 / 50618
- Flame resistance: Complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: Halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
- Durability: With a high resistance to UV radiation, ozone and weathering, the cable offers a reliable solution for long-term applications.
- Easy installation: Thanks to its flexibility and robust construction, the cable is easy to lay and suitable for a wide range of installations.
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
Conductor cross-section: 4mm², fine wire, red or black:
- With a rated voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems
- Robust construction: With an outer cable diameter of 5.5 mm and a nominal insulation wall thickness of 0.7 mm and coating of 0.8 mm, the cable is robust and durable
- DC line resistance: 5.09 Ohm/km
- Voltage test on the cable: AC 6.5 kV, DC 15 kV
- Min. bending radius: 22 mm
Conductor cross-section: 6mm², fine-wire, red or black
- With a rated voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems
- Robust construction: With an outer cable diameter of 6.3 mm and a nominal insulation wall thickness of 0.7 mm and coating of 0.8 mm, the cable is robust and durable
- DC line resistance: 3.39 Ohm/km
- Voltage test on the cable: AC 6.5 kV, DC 15 kV
- Min. bending radius: 26mm
Solar photovoltaic connector sets
The InLine solar photovoltaic connector sets are suitable for cables with a cross-section of 4 to 6 mm² and a cable diameter of 5.0 to 7.5 mm.
Compatible with the most common connector systems such as MC4, Standard4 and PV4, the set offers a wide range of applications in photovoltaic systems. With an IP68 waterproof rating when plugged in, it provides reliable protection against water and dust. The connectors are designed for a maximum voltage of 1500V DC and 30A current carrying capacity and function in a temperature range of -40 °C to +85 °C. Ideal for a secure and durable connection in demanding installations.
InLine® Solar Photovoltaic Connectors, plug + socket
Photovoltaic plug connector set, plug/socket
- for 4 - 6 mm² cable cross-section
- plug + socket in a set
- compatible with Standard4/ MC4 / PV4
- cable diameter: 5.0 - 7.5 mm
- Colour: black
- For crimping
- IP68 Waterproof when plugged in
- Up to 1500V DC / 30A
- Ambient temperature: -40°C to +85°C
Tools - optimised for working with solar / photovoltaic cables
InLine tools for solar cabling are the perfect choice for professional and safe installations. Ergonomically designed, they impress with their durability, precision and robustness. Whether crimping pliers, stripping tools, cutter pliers or installation spanners - with our high-quality products, every connection can be made reliably and efficiently.
1. cut the cable to length
InLine® Cable Cutter for PV solar cables up to 6mm²
The InLine® cable pliers/cutter are an indispensable tool for anyone working with cable lines and photovoltaic solar cables. Developed for precise cutting, these pliers enable effortless cutting of cables up to a cross-section of 6mm².
The cutter is ideal for electricians, solar technicians and DIYers. Whether you are installing solar modules, laying cables or maintaining existing systems, this tool is the perfect companion for your projects.
The cutter is ideal for electricians, solar technicians and DIYers. Whether you are installing solar modules, laying cables or maintaining existing systems, this tool is the perfect companion for your projects.
- Suitable for cable lines and photovoltaic solar cables up to 6mm² cross-section
- Precise and clean cuts thanks to hardened cutting blades
- Ergonomic design for comfortable working
- High durability and resistance
- Ideal for professional users and ambitious DIYers
Item no.:
94102
2. strip the cable
InLine® wire stripping tool for solar cables, 2.5mm² 4.0mm² 6.0mm²
These high-quality wire strippers have been developed for the precise stripping of common solar cables with cross-sections of 2.5 mm², 4.0 mm² and 6.0 mm². It enables precise and clean preparation of cables for optimal crimping.
- Compatibility: Suitable for the most common photovoltaic cables used in solar energy.
- Precision: Ensures reliable and damage-free free stripping without damaging the conductors.
- Simplicity: Ergonomic design for comfortable handling and effortless work.
- The wire stripper is the ideal tool for assembling solar cables and is perfectly suited for: balcony power plants, mini-photovoltaic systems, solar systems of all kinds.
Item no.:
94101
3. crimp cable
InLine® Crimping tool for photovoltaic solar connectors (MC4, PV4)
The InLine® crimping tool for MC4 / PV4 solar connectors is the ideal tool for precise and reliable crimping of solar cables with a cross-section of 2.5 mm² to 6 mm² (14–10 AWG). It was specially developed for processing MC4 / PV4 solar connectors and offers comfortable handling thanks to its ergonomic design and high-quality workmanship. With its robust construction, the crimping tool ensures a secure connection that meets the requirements of modern solar installations. Perfect for installers and DIYers who value quality and durability.
Item no.:
94100
4. Install cable
InLine® assembly spanner for solar connectors (MC4 / PV4), set of 2
The InLine® assembly spanner set for solar connectors (MC4 / PV4) is the practical solution for quick and safe installation of solar plug connections. The set includes two high-quality spanners that have been specially designed for the reliable tightening and loosening of MC4 and PV4 connectors. The robust construction, made from durable material, ensures high stability and a long lifespan. Thanks to their handy design, the spanners are easy to use and ensure efficient installation of solar systems. Perfect for professionals and DIYers alike.
Item no.:
94103
Pre-assembled cables for quick installation
Available with 4mm² or 6mm² and 1-15 m
Pre-assembled solar extension cables from InLine offer the perfect solution for quick and safe installation. Already equipped with high-quality connectors, you save valuable time and avoid installation errors. Simply connect and get started straight away - for efficient and reliable cabling of your photovoltaic system.
The H1Z2Z2-K solar cables in a set of 2 (black/red) with pre-assembled solar connectors (compatible with MC4, Standard4 and PC4 systems) enable solar panels and inverters to be connected quickly and easily.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 4mm², incl. solar plug in a set of two (black/red) has been specially developed for wiring photovoltaic systems and offers maximum reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and an operating voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 5.5 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 4 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 5.0 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LS0H (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 22 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® solar cable extension set for photovoltaics
The solar cable H1Z2Z2-K, 6mm², incl. solar plug in a set of two (black/red) has been specially developed for the cabling of photovoltaic systems and offers the highest reliability and durability. With its robust construction and outstanding technical properties, it ensures that the PV system will operate efficiently and safely for years to come.
- High nominal and working voltage: with a nominal voltage of 1.0/1.0 kV AC and a working voltage of 1.5 kV DC in accordance with EN 50618, the cable is ideally designed for the requirements of modern solar systems.
- Robust construction: With an external cable diameter of 6.3 mm and a nominal wall thickness of the insulation of 0.7 mm and the coating of 0.8 mm, the cable is robust and durable.
- Conductor cross-section: 6 mm², fine-wired
- Conductor material: copper, tinned
- DC line resistance: 3.3 9 Ohm/km
- Voltage test on cable: AC 6.5 kV, DC 15 kV
- Current carrying capacity: Tested according to EN 50618
- Ozone and weather resistance, UV resistance: Tested according to EN 60811 / 50618
- Flame resistance: complies with EN 60332-1-2, LSOH (Low Smoke Zero Halogen)
- Insulation: halogen-free, low-smoking, cross-linked polyolefin (XLPO)
- Ambient temperature: -40°C to +90 °C
- Min. bending radius: 26 mm
Note on the wire cross-section:
The required wire cross-section depends on the current and the distance or cable length. If in doubt, please consult a solar technician to find out which wire cross-section you need.
InLine® Solar cable distributor set for photovoltaics
High-quality solar cables Y-splitters are used to distribute the cable paths to the corresponding solar modules.
- Cable with 4mm² cable cross-section according to type H1Z2Z2-K
- Nominal voltage 1500V DC, nominal current 30A
- Degree of protection IP68 when plugged in
- Temperature range -40°C to +85°C
- UV resistant
- Red version: solar plug (M) to 4x solar socket (F), black version: solar socket (F) to 4x solar plug (M)
- Solar plug Standard4/MC4/PV4 compatible
- Including dust caps
Distribution cable for easy splitting of the cable runs
The InLine solar cable distribution sets are the ideal solution for efficiently distributing the power supply in photovoltaic systems. With a robust 4mm² cable of type H1Z2Z2-K, a rated voltage of 1500V DC and a rated current of 30 A, it offers the necessary performance for demanding solar systems.
The high degree of protection IP68 ensures watertightness when plugged in. The cables are compatible with the common MC4, Standard4 and PV4 connector systems.
Protection during and after installation
InLine dust caps for solar photovoltaic connectors
The InLine dust protection caps reliably protect your solar photovoltaic connectors from dust and dirt. Especially during installation or in incomplete solar systems, when cables and contacts are exposed to wind and weather, these caps offer a simple solution for protection. They are compatible with the common MC4, Standard4 and PV4 connector systems, making them versatile in use.
InLine® dust caps for solar photovoltaic connectors, set of 10
The dust protection caps prevent dust and dirt from entering the contacts. In particular, when installing photovoltaic systems outdoors, solar cables and open contacts may be exposed to wind and weather until the cabling is complete. These caps are simple tools to protect the cable contacts.
- 10x plug + socket set
- Compatible with solar connectors Standard4/ MC4 / PV4
- Colour: black
Item no.:
94030
